• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.1-10
• /
• 1996

Solar cells made of the edge-defined film-fed growth Si are characterized using current-voltage, surface photovoltage, electron beam induced current, electron microprobe, scanning electron microscopy, and electron backscattering. The weak temperature dependence of the I-V curves in the EFG solar cells is due to a voltage variable shunt resistance giving higher diode ideality factors than the ideal one. The voltage variable shunt resistance is modeled by a modified recombination mechanism which includes carrier tunneling to distributed impurity energy states in the band gap within the space-charge region. The junction integrity and the substrate quality are characterized simultaneously by combining I-V and surface photovoltage (SPV) measurements. The diode ideality factors and the surface photovoltages characterize the junction integrity while the SPV diffusion lengths characterizes the substrate quality. Most of the measured samples show the voltage variable shunt resistance although how serious it is depends on the solar cell efficiency. The voltage variable shunt resistance is understood as one of the most important factors of the degradation of EFG solar cells.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.59-63
• /
• 2008

The surface runoff is one of the important components for the surface water balance. However, most Land Surface Models(LSMs), coupled to climate models at a large scale for the prediction and prevention of disasters caused by climate changes, simplistically estimate surface runoff from the soil water budget. Ignoring the role of surface flow depth on the infiltration rate causes errors in both surface and subsurface flow calculations. Therefore, for the comprehensive terrestrial water and energy cycle predictions in LSMs, a conjunctive surface-subsurface flow model at a large scale is developed by coupling a 1-D diffusion wave model for surface flow with the 3-D Volume Averaged Soil-moisture Transport(VAST) model for subsurface flow. This paper describes the new conjunctive surface-subsurface flow formulation developed for improvement of the prediction of surface runoff and spatial distribution of soil water by topography, along with basic schemes related to the terrestrial hydrologic system in Common Land Model(CLM), one of the state-of-the-art LSMs.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.3
• /
• pp.1-11
• /
• 2004

To evaluate the applicability of dielectric constant measurement method on the geoenvironmental investigation of subsurface contaminated by landfill leachate, the analysis on dielectric characteristics of sand containing contaminated pore water by landfill leachate was performed. The separate real and imaginary parts of dielectric constant were investigated in the frequency range of 75kHz to 12MHz. The real part of dielectric constant increased at the lower frequency wherea the real part of dielectric constant decreased at the higher frequency as the concentration of leachate increased. These results can be explained by the frequency dependence of space charge polarization and orientation polarization. The imaginary part of dielectric constant on the contaminated sand with leachate increased with their concentration for whole frequency range. These results are caused by the increase of energy loss due to the enhancement of conduction in soil with leachate concentration. The results in this study indicate that the dielectric constant measurement method has potential in evaluating the contaminated soil and pore water by landfill leachate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.89-90
• /
• 2010

최근 우리는 InGaAs 위에 성장한 InAs 양자점에 GaAs를 얇게 덮음으로써 양자고리를 성장하고, 그 광학적 특성을 분석하였다. [1] 이번 연구에서는 이 양자고리 구조의 전자 구조 및 광학적 특성을 전산모사를 통해 계산하였고, GaAs가 구조의 응력, 압전 포텐셜 및 light-hole 분율에 미치는 영향을 분석하였다. 이론적인 분석을 위해, valence force field 방법을 이용하여 이종 물질간의 격자상수 차이에 의한 격자 변형 및 압전 포텐셜의 변화를 계산하였고, 양자고리 내 전자의 양자화 에너지 및 파동함수를 k p 방법을 통해 얻을 수 있었다. 또한 광학적인 특성 등의 다체 효과를 예측하기 위해 configuration interaction 방법을 사용하였다. 이 연구에서 우리는, GaAs가 InAs에 강한 압축 응력을 가할 것이라는 일반적인 예측과 달리, InGaAs 매트릭스 안에서는 격자상수가 작은 GaAs가 InAs 양자고리에 효과적인 압축 응력을 가할 수 없음을 보였다. 특히 GaAs 층의 두께가 얇을 경우, InGaAs 매트릭스에 의해 인장 응력을 받는 GaAs가 InAs의 응력을 해소하기 충분한 공간을 제공하여, 오히려 InAs의 압축 응력을 약화시키는 것을 알 수 있었다. 이 연구 결과는 응력 분포가 단순한 양자우물 등의 2차원 구조와 달리, 응력 분포가 복잡한 3차원 나노 구조에서는 단순히 격자상수만으로 파장 변화 경향을 예측할 수 없음을 나타낸다. 또한 우리는, GaAs의 큰 negative 이방 응력과 InAs의 작은 positive 이방 응력에 의해 전자와 heavy-hole은 InAs에, light-hole은 GaAs에 구속됨을 보였다. 즉, InAs보다 밴드갭이 큰 GaAs가 전자와 heavy-hole에 대해서는 강한 포텐셜 배리어로 작용하지만 light-hole에 대해서는 포텐셜 우물로 작용하는, 반 우물-반 배리어 특성을 가짐을 알 수 있었다. 이로 인해 GaAs가 있는 양자고리의 light-hole 분율이 GaAs가 없을 경우에 비해 2배에서 8배가량 증가함을 보일 수 있었다. 비슷한 특성이 hole에 대해서는 InP나 InGaAsP 위에 성장한 GaAs 층에서 보고된 바가 있으나, 전자는 InAs로, hole은 GaAs로 분리할 수 있는 3차원 나노 구조에 대한 연구는 이 연구가 처음이다. [2]

• Conservation Science in Museum
• /
• v.18
• /
• pp.65-76
• /
• 2017

Following advances in technology and with the growing need for renewable energy, fluorescent and halogen lamps are being replaced by LED lighting in museum systems. This paper researched the setting of standards for the diverse lighting systems in addition to the LED lighting that are expected to be introduced in museums in the future. Contrary to previous belief, LEDs were shown to only barely emit in the ultraviolet region, but the visible rays were confirmed to produce discoloration depending on illuminance-hours. When the color change by LED lamps at the color temperature of 2800K, or warm white, was compared with 5500K, or white, the emission spectrum analysis confirmed that the blue spike increased at a higher color temperature and caused more discoloration. This suggests that in addition to illumination, color temperature should be considered by including the emission spectrum when museums set lighting environment standards.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.434-445
• /
• 2010

Underground compressed air energy storage (CAES) system in a lined rock cavern is considered one of the promising large-scale energy storage technologies. In this study, permeabilities of concrete lining block and its construction joint, which are the major components of an air tightness system of the undeground CAES, were measured from a model experiment. From the experiment, it was found that intrinsic permeability of construction joint was larger than that of concrete block by the order scale of $10^1{\sim}10^4$, so that it would be very important to control the quality of construction joints in-situ in order to secure air tightness of storage system. And the permeability of construction joint could be decreased as low as that of the concrete block by pasting an acryl-type adhesive on bonding surfaces. Higher degrees of water saturation of the concrete block resulted in the lower permeability, which is more preferable in the viewpoint of air tightness of storage cavern.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2005

This paper is described on the development of KOTRON-13 and recent status of PET cyclotron by commercial cyclotron companies. KIRAMS has developed medical cyclotron which is KIRAMS-13. Samyoung Unitech produces KOTRON-13 with transfered technology by KIRAMS. As a part of Regional Cyclotron Installation Protect, KOTRON-13 cyclotrons and $[18F]FDG$ production modules are being installed at regional cyclotron centers in Korea. The medical concern with radiation technology has been growing for the last several years. Early cancer diagnosis through the cyclotron and PET-CT have been brought to public attention by commercial cyclotron models in the world. The new commercial cyclotron models are introduced compact low energy cyclotrons developed by CTI, GE, Sumitomo in recent. It produces different short-lived radioisotopes, such as $[^{18}F],\;[^{11}C],\;[^{13}N]\;and\;[^{15}O]$. For the better reliability acceleration particle is proton only. The characteristics of new model cyclotrons are changed to lower energy corresponding to less 13 MeV. New models have self-shielding and low power consumption. Design criteria for the different types of commercial cyclotrons are described with reference to hospital demands.

• Journal of Radiation Protection and Research
• /
• v.4 no.1
• /
• pp.1-4
• /
• 1979

Effective multiplication factor has been calculated for one PWR fresh fuel assembly immersed in a spent fuel storage vault on the basis of the neutron transport theory. A numerical calculation has been carried out by means of Sn approximation. The method employed in this study is that the energy domain is broken into 16 groups, the angular variable is divided into four discrete direction, i.e., $S_4$, and the spatial variable which is divided into fine meshes at the interface between different materials is discretized into 27 mesh points. The calculated $K_{eff}$ value of 0.6145 seems to be far small in comparison with the value obtained by other author for an infinite array of fuel assemblies.

• Journal of Radiation Protection and Research
• /
• v.13 no.2
• /
• pp.29-40
• /
• 1988

A spectrum-exposure rate conversion operator G(E) for a portable HPGe detector used for field environmental radiation survey was theoretically developed on the basis of a space distribution function of gamma flux emitted from a disk source and an areal efficiency of the detector. The radiation exposure rates measured using this G(E) and the portable HPGe. detector connected to a portable multichannel analyzer were compared with those measured by a 3' ${\phi}\;{\times}$3' NaI(Tl) scintillation detector with the reported G(E) and a pressurized ionization chamber. A comparison of the three results showed that the result obtained using the HPGe detector was lower than those determined using the NaI(Tl) detector and ionization chamber by 17% to 29%, The difference obtained is close to that reported in literature. The method developed here can be easily applicable to obtain a G(E) factor suitable to any detector for detecting the exposure rate of environmental gamma radiation, since the spectrum-exposure rate conversion operator can be calculated by a hand calculator.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.114-114
• /
• 2016

토양유실에 영향을 미치는 기후 인자로는 강우, 기온, 바람, 습도 및 태양열 복사 등이 있다. 이들 중 강우는 토양침식에 직접적인 영향을 미치는 인자로 토립장의 이탈로 인한 토양침식을 유발한다. 토양침식을 예측하는데 있어 강우의 영향을 나타내는 지표의 설정은 매우 중요하다. 이러한 강우침식인자는 각 강우사상에 대한 강우에너지와 30분 최대 강우강도의 곱의 합으로 정의된다. 강우침식도를 정확하게 계산하기 위해서는 다년간 측정된 분단위 강우자료가 필요하며, 강우자료 획득의 제한과 강우의 분류 및 계산과정 등이 복잡하여 실무적으로 산정하기 어려운 점이 있다. 본 연구에서는 1분 상세강우자료를 이용하여 개정범용토양유실공식(RUSLE)의 강우침식도 R의 추정을 위해 2001년부터 2015년까지 15년간 전국 61개 기상청 관측소의 강우 자료를 수집하여 지점별로 새롭게 계산한 연 강우침식도 및 경험식을 산정하였으며 남한전체($99,720km^2$)를 대상으로 연 강우침식량의 공간분포맵을 작성하였다. 지점별 산정된 경험식은 연평균 강우량과 1분 강우자료로부터 산정된 강우침식도와의 상관관계로 회귀식을 도출하였다. 1분 강우자료로 계산된 강우침식도와 연평균 강우량의 상관관계로부터 도출된 경험식과의 결정계수($R^2$, determination coefficient)는 0.70 ~ 0.98로 높은 상관관계를 나타냈으며 또한, 기존의 국내에서 적용된 경험식과 비교하여 평균 $R^2$가 0.59에서 0.80로 실측값과의 정확성이 높게 개선됨을 알 수 있다.