• Title/Summary/Keyword: 에너지 공간

Search Result 1,727, Processing Time 0.027 seconds

The Characteristics of Spatio-temporal Distribution on Environmental Factors After Construction of Artificial Structure in the Nakdong River Estuary (인공시설물 건설 이후 낙동강 하구 환경인자의 시·공간적분포특성)

  • Yoon, Sang Chol;Youn, Suk Hyun;Suh, Young Sang
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.20 no.1
    • /
    • pp.1-11
    • /
    • 2017
  • Nakdong River Estuary is affected by the dam, barrage construction and dredge and reclaim worked artificially. So, we have studied the area input both freshwater and sea water to understand marine environment of Nakdong River estuary related to the effect of artificial work from 2013 to 2015. As a result, The discharge flow to the estuary remarkably decreased before barrage construction and the average of salinity at the estuary increased. So, the brackish water zone reduced under the influence of decreased discharge flow. The major sources of nitrate and silicate were freshwater, phosphate supplied from bottom and the open sea water. The concentration of phosphate and dissolved oxygen (DO) decreased remarkably in spring and summer. we investigated that phosphate in freshwater was removed under the influence of the estuary dam and phosphate in sea water was removed under the influence of phytoplankton. The low concentration of DO was due to decomposition of the organic compound by microorganism after phytoplankton blooms. Generally, the concentrations of chlorophyll-a in summer was higher than spring and fall. Therefore, the change of ecosystem in Nakdong river estuary was due to decrease of freshwater influx, the other change is facing because of the barrage.

3D-Numerical Simulation of Wave Pressure Acting on Caisson and Wave Characteristics near Tip of Composite Breakwater (혼성방파제의 케이슨에 작용하는 파압과 선단 주변에서 파랑특성에 관한 3차원수치시뮬레이션)

  • Choi, Goon-Ho;Jun, Jae-Hyoung;Lee, Kwang-Ho;Kim, Do-Sam
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.32 no.3
    • /
    • pp.180-201
    • /
    • 2020
  • It has been widely known that the effect of diffracted waves at the tip of composite breakwater with finite length causes the change of standing wave height along the length of breakwater, the spatial change of wave pressure on caisson, and the occurrence of meandering damage on the different sliding distance in sequence. It is hard to deal with the spatial change of wave force on trunk of breakwater through the two-dimensional experiment and/or numerical analysis. In this study, two and three-dimensional numerical techniques with olaFlow model are used to approach the spatial change of wave force including the impulsive breaking wave pressure applied to trunk of breakwater, the effect of rear region, and the occurrence of diffracted waves at the tip of caisson located on the high crested rubble mound. In addition, it is thoroughly studied the mean wave height, mean horizontal velocity, and mean turbulent kinetic energy through the numerical analysis. In conclusion, it is confirmed that the larger wave pressure occurs at the front wall of caisson around the still water level than the original design conditions when it generates the shock-crushing wave pressure checked by not two-dimensional analysis, but three-dimensional analysis through the change of wave pressure applied to the caisson along the length of breakwater.

Dose Characteristics of Stereotactic Radiosurgery in High Energy Linear Accelerator Proton Beam (고에너지 선형가속기에 의한 입체방사선수술의 선량특성)

  • Choi, Tae-Jin;Kim, Ok-Bae
    • Radiation Oncology Journal
    • /
    • v.10 no.2
    • /
    • pp.137-145
    • /
    • 1992
  • Three-dimensional dose calculations based on CT images are fundamental to stereotactic radiosurgery for small intracranial tumor. In our stereotactic radiosurgery program, irradiations have been performed using the 6 MV photon beam of linear accelerator after stereotactic CT investigations of the target center through the beam's-eye view and the coordinates of BRW frame converted to that of radiosurgery. Also we can describe the tumor diameter and the shape in three dimensional configuration. Non-coplanar irradiation technique was developed that it consists of a combination of a moving field with a gantry angle of $140^{\circ}$, and a horizontal couch angle of $200^{\circ}C$ around the isocenter. In this radiosurgery technique, we provide the patient head setup in the base-ring holder and rotate around body axis. The total gantry moving range shows angle of 2520 degrees via two different types of gantry movement in a plane perpendicular to the axis of patient. The 3-D isodose curves overlapped to the tumor contours in screen and analytic dose profiles in calculation area were provided to calculate the thickness of $80\%$ of tumor center dose to $20\%$ of that. Furtheremore we provided the 3-D dose profiles in entire calculation plane. In this experiments, measured isodose curves in phantom irradiation have shown very similiar to that of computer generations.

  • PDF

Experimental Study on Buckling Restrained Knee Bracing Systems Using Bolted Channel Sections (볼팅 고정 채널 형강 보강재를 이용한 비좌굴 Knee Bracing System의 내진성능에 대한 실험 연구)

  • Lee, Jin;Lee, Ki-Hak;Lee, Sung-Min;Shin, Ji-Wook;Kim, Young-Min
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.13 no.2
    • /
    • pp.37-46
    • /
    • 2009
  • In this study, the seismic performance of the Buckling Restrained Knee Bracing (BRKB) system was evaluated through a pin-connected 1-bay 1-story frame. The BRKB system using a bolted channel section developed was composed of a steel plate as a load-resisting core member and two channel sections as a restrainment of the local and global buckling of the core plate. The main purpose of the BRKB system is to be used as an effective tool to re-strengthen/rehabilitate old low- and mid-rise RC frame buildings, which do not have enough seismic resistance to earthquake loadings. The main variables for the test specimens were the size of the core plates, stiffeners and the use of guide plates. The test results showed that the size of the core plate, which was the main element for the load-resisting member, was the most important parameter to achieve ductile behavior under tension as well as compression, until the maximum displacement exceed twice the design drift limit given by the AISC Seismic Provisions.

Mutual Authentication Mechanism for Secure Group Communications in Sensor Network (센서 네트워크에서의 안전한 그룹통신을 위한 상호 인증 기법)

  • Ko, Hye-Young;Doh, In-Shil;Chae, Ki-Joon
    • The KIPS Transactions:PartC
    • /
    • v.17C no.6
    • /
    • pp.441-450
    • /
    • 2010
  • Recently, a lot of interest is increased in sensor network which gathers various data through many sensor nodes deployed in wired and wireless network environment. However, because of the limitation in memory, computation, and energy of the sensor nodes, security problem is very important issue. In sensor network, not only the security problem, but also computing power should be seriously considered. In this paper, considering these characteristics, we make the sensor network consist of normal sensor nodes and clusterheaders with enough space and computing power, and propose a group key rekeying scheme adopting PCGR(Predistribution and local Collaborationbased Group Rekeying) for secure group communication. In our proposal, we enhance the security by minimizing the risk to safety of the entire network through verifying the new key value from clusterheader by sensor nodes. That is, to update the group keys, clusterheaders confirm sensor nodes through verifying the information from sensor nodes and send the new group keys back to authentic member nodes. The group keys sent back by the clusterheaders are verified again by sensor nodes. Through this mutual authentication, we can check if clusterheaders are compromised or not. Qualnet simulation result shows that our scheme not only guarantees secure group key rekeying but also decreasesstorage and communication overhead.

Temporal and Spatial Fluctuations of Coastal Water Quality and Effect of Small Tide Embankment in the Muan Peninsula of Korea (무안반도 연안수질의 시ㆍ공간적 변동과 소규모 방조제의 영향)

  • Lee Dae-In;Cho Hyeon-Seo;Lee Gyu-Hyung;Lee Moon-Ok
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.6 no.4
    • /
    • pp.24-36
    • /
    • 2003
  • In this study, we estimated the seasonal fluctuations of water quality and effect of small tide embankment in coastal water around the Muan Peninsula, which is located in the northern part of Mokpo city, and layer farming ground is spread around there. Some physical and chemical factors were analyzed to characterize water quality from Jan. to Oct. in 1994. The results were as follows: Dissolved oxygen was slightly under saturation in the almost areas of July, and in some bottom layer at ebb tide of October. Distribution of COD showed high values that over 2㎎/L in October and flood tide of April by the discharge of freshwater and resuspension of benthic sediment, which exceeded water quality criteria II. Maximum values of dissolved inorganic nitrogen ware appeared in surface layer during the flood tide of October, while minimum of that showed in surface layer in April. Concentration of dissolved inorganic phosphorus was higher at July than the others, which ranged from 0.24 to 2.08㎍-at/L. Mostly mean values of N/P ratio were lower than 16, it mean that nitrogen is more limiting nutrient than phosphorus for the growth of phytoplankton. The values of eutrophication index were in the range of 0.07~0.81. However, very high values due to increase of COD were estimated near the tide embankment and southern part in relation to tidal current in October. Water quality around tide embankment was suddenly changed worse within a short period after opening the water gate during the rainfall.

  • PDF

Indicators and Planning Features of Ecologically Based Urban Regeneration -Cases from Hamburg, Germany and Copenhagen, Denmark (생태기반형 도시재생의 계획지표 및 특성에 관한 연구 -독일 함부르크와 덴마크 코펜하겐 사례를 중심으로)

  • Rhee, Bum-Hun;Chang, Dong-Min
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.10
    • /
    • pp.158-166
    • /
    • 2018
  • Contrary to urban development, urban regeneration is a process of land development through conservation, restoration, and management. In particular, ecologically based urban regeneration is an attempt to improve the quality of life in an area, establish a stable settlement space, and revitalize the local economy by considering the ecological environment. In this regard, the objectives of this study were to establish theoretical concepts and analyze the successful foreign cases of ecologically based urban regeneration, and propose a direction of socio-economic regeneration along with the physical-environmental regeneration of urban areas in Korea. The study results suggest the following. First, strategies must be developed to coordinate public transportation, such as buses and subways, by considering the importance of bicycle riders, along with the sustainable-commuting system. Second, both the importance of planning parks and trails around water systems in various scales while maintaining the existing natural environment as well as using natural elements, such as electric vehicles and wind-power generation systems, were emphasized. Third, urban regeneration for increased energy efficiency requires specific architectural planning and facilities. Fourth, education and research for easy access by the public, as well as public-private partnership, will be needed in the regeneration process.

Distribution of Dissolved Heavy Metals in Surface Seawaters Around a Shipyard in Gohyun Bay, Korea (고현만의 조선소 주변 표층해수 중의 용존 중금속 농도 분포)

  • Kim, Kyung Tae;Ra, Kongtae;Kim, Joung Keun;Kim, Eun Soo;Kim, Chong Kwan;Shim, Won Joon
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.18 no.1
    • /
    • pp.36-44
    • /
    • 2015
  • The spatial and temporal distribution of dissolved trace metals has been studied to identify trends in space and time and to evaluate the pollution status in a semi-closed bay (Gohyun bay), Korea. Surface seawater samples were collected over four seasons at 18 stations in the bay between 2003 and 2004 and once at 7 stations around a large shipyard in May 2004. The concentration of Cd, Co, Cu, Ni, Pb, and Zn in seawater in February and May were highly variable in space, showing the higher value relative to other season. Those metals concentrations were decreased from inner-to outer-stations. In around the shipyard, Cu, Pb and Zn showed the higher variability depending on time. Cu and Zn concentrations at the sites around the shipyard had 2 times higher values compared with the average of inner stations in Gohyun bay. The very high correlations between salinity and either Cu and Zn has been showed. Especially, there was a significant relationship between Cu and Zn. We recognize that the shipyard is major source of Cu and Zn in seawater. Therefore, marine environment management policy such as the prevention and control of heavy metal input from a shipyard is required.

행성 근접통과를 이용한 행성간 탐사선의 궤도 설계에 관한 연구

  • 송영주;유성문;박은서;박상영;최규홍;윤재철;김방엽;김병교;최준민
    • Bulletin of the Korean Space Science Society
    • /
    • 2003.10a
    • /
    • pp.50-50
    • /
    • 2003
  • 본 연구에서는 행성 근접통과(Gravity Assist, Swingby, Flyby)를 이용한 행성간 탐사선의 궤도를 설계할 수 있는 알고리즘 개발을 자체적으로 수행하였다. 미 항공우주국(NASA)에서는 이를 이용한 행성간 탐사선의 궤도에 관한 연구를 이미 1950년대부터 시작하여 왔으며, 1973년 Mariner 10호가 한번에 두 행성, 금성과 수성을 탐사하는데 성공하였다. 행성간 임무에 있어서 행성 근접통과를 적절하게 이용한다면 임무 수행시 요구되는 에너지를 최소화 시킬 수 있어 발사비용의 절감효과와 함께 한번의 발사로 여러 행성의 탐사가 가능하여 임무의 효율성을 증대 시킬 수 있다. 행성 근접통과를 이용한 행성 탐사선의 궤도설계를 위해서는 근접 통과하는 행성(Flyby planet)에서의 진입속도벡터( $V_{\infty}$$^{ -}$) 및 출발속도벡터( $V_{\infty}$$^{+}$)의 크기, 근접 통과시의 비행 고도(Flyby altitude), 근접 통과 행성과의 충돌여부 분석(B-plane analysis), 최종적으로 도착하고자 하는 행성(Target planet)의 위치 등 많은 제한조건이 고려되어야 한다. 연구된 알고리즘의 결과를 미 항공우주국 (NASA)의 임무였던 Mariner 10호의 결과와 비교하여 보았으며, 우리나라가 향후 목성으로 탐사선을 보낸다고 가정하였을 경우, 행성 근접통과를 이용한 탐사선의 발사시기(Launch Window), 요구되는 발사 에너지(C3)값, 그리고 각각에 따른 궤적들을 산출하여 보았다. 이미 기술 개발을 완료한 국가들이 관련 기술의 제휴를 기피하고 있는 현 상황에서 이와 관련된 연구는 우주개발의 시대를 열고 있는 우리나라의 우주개발관련 기초 기술 분야를 위해 선행 연구되어야 할 부분이다. 기초 기술 분야를 위해 선행 연구되어야 할 부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$$\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하

  • PDF

Distribution and Pollution of Heavy Metals in the Environmental Samples of the Lake Shihwa (시화호 환경 중의 중금속 분포 특성과 오염)

  • Kim, Kyung-Tae;Kim, Eun-Soo;Cho, Sung-Rok;Chung, Kyung-Ho;Park, Jun-Kun
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.8 no.3
    • /
    • pp.148-157
    • /
    • 2005
  • In order to understand distribution characteristics and pollution of heavy metals in the artificial Lake Shihwa in the vicinity of Kyunggi Bay in relation with huge environmental changes, various environmental samples including seawaters, surface sediments and settling particulate matters were collected from Lake Shihwa in 2004. Due to extreme pollutant discharge from various anthropogenic sources such as the Banweol and Shihwa Industrial Complexes and cities, the highest metal concentrations in the samples such as waters, sediments and settling particulate matter were found in inner part of the lake. High metal contents (Cu, Zn and Hg) in sediments were observed at Sts. 2-4 and 9. The contents of Cr, Co, Ni, Cu, Zn and Pb in SPMs were high at St. 5 and low in the outer part of the lake. Spatial distribution of heavy metals were mainly controlled various biogeochemical factors and physical mixing as well as input of industrial and municipal wastewaters. Although tile environmental qualities of heavy metals in the lake have been improved partially due to inflow of outer seawater, it is not clear to reach a good environmental quality. Therefore, further environmental programs should be conducted continuously for environmental improvement.

  • PDF