• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.13-26
• /
• 2022

Calcite twins were analyzed in six oriented samples of the Pungchon limestone, Joseon Supergroup, to reconstruct the paleostress field. The orientations of c-axis of calcite and e twin plane were measured along with the average thickness and numbers of twins, and the widths of calcite grains. Twin strain, mean width, and intensity of twinning, and the relative magnitude and orientations of principal stresses were calculated using Calcite Strain Gauge program. Twin strain, mean width, and intensity of twinning showed ranges of 1.09-15.36%, 0.53-3.72 ㎛ and 21.0-53.1 twim/mm, respectively. Metamorphic temperatures calculated from the twins were 170-200℃, indicating that the twins developed after the Pungchon limestone was uplifted to at least half of the maximum burial depth. Results for five of the samples indicate that the calcite twins formed during two events with principal stress axes of different orientations, while the remaining sample recorded only one event that produced calcite twins. The axis of maximum compressive stress was oriented mainly WNW-ESE to ENE-WSW, and to a lesser degree NW-SE and NE-SW. Comparison of paleostress orientations measured here and in other studies indicates that most twins were produced during the Songrim orogeny. However, the Daebo orogeny and the Bulguksa orogeny also produced calcite twins in the Punchon limestone.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.75-88
• /
• 2014

본 연구에서는 비선형 Poisson-Boltzmann 식의 해를 구할 수 있는 웹 기반 EPBS를 이용하여 이온채널의 전하 분포와 유전률이 이온채널의 이온선택성에 미치는 영향에 대해 알아본다. 모델로 사용한 이온채널은 이온채널과 유사한 구조를 갖는 합성 단백질인 고리형 펩타이드 나노튜브와 자연계에 존재하는 Gramicidin A 이다. 계산 결과로부터 용매인 물과 단백질의 유전율 차이에 의해 이온이 이온채널을 통과할 때 반응장이 생성되며, 이는 이온과 상호작용을 통해 이온 종류에 관계없이 이온 통과를 방해하는 에너지 장벽을 형성함을 알 수 있다. 한편, 두 이온채널 부분 전하, 특히 골격에 존재하는 카르보닐기의 쌍극자 모멘트에 의해 이온채널 내부에는 0 보다 작은 정전기 퍼텐셜이 형성된다. 이온채널 내부의 총 정전기 퍼텐셜은 이온채널의 부분 전하에 의한 정전기 퍼텐셜과 유전률 차이에 의한 반응장의 합으로 나타나며, 계산 결과 0 보다 작은 값을 갖는다. 이로부터 본 연구에서 사용된 두 종류의 이온채널이 양이온에 선택성이 있음을 알 수 있다.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.681-692
• /
• 2015

It is well documented that physiological and nutritional condition of wintering birds is strongly related to migration success to breeding sites, and also breeding success. However, how abiotic factors during winter affect the migration and breeding successes still remains unclear. Thus, this study developed a dynamic-state-dependent model for wintering life-history to identify the potential impact on the life-history, success to breeding site and breeding success of wintering birds, which are related to temperature fluctuation, interspecific competition and human disturbance at the wintering sites. To find the best-fit-model, we referred to the existing research data on wintering ecology of Red-crowned cranes (Grus japonensis) in Cheolwon, Korea, which is well documented as a long-term wintering study. Our model predicted that the higher temperature fluctuation and a higher rate of human disturbance are negatively related to migration success to breeding sites and their fitness, ultimately breeding success via changing of proportion in resource allocation (for e. g., lower energy compensation or higher level of stress accumulation). Particularly, the rate of body mass compensation after arrival at wintering sites may be accelerated when there are less temperature fluctuations and a lower rate of human disturbance. In addition, the rate of interspecific competition sharing the wintering foraging sites is negatively related to the rate of body mass compensation. Consequently, we discussed the conservation strategies of wintering birds based on the outcomes of the model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.149.2-149.2
• /
• 2014

진공용기를 배기하기 시작하면 짧은 시간 동안은 공기의 배기가 주를 이루지만 그 후에는 표면 방출 기체의 배기가 이어지고 표면방출 기체의 대부분은 물이라는 것은 누구나 알고 있는 사실이다. 그러나 배기 계산을 할 때는 막상 물 보다는 공기의 일부로 생각하거나 수분을 다른 기체들과 유사하게 다루는 것에 익숙해져 있다. 이런 계산 결과는 실제 상황을 재현하지 못할 뿐만 아니라 일반적으로 배기능력을 과대평가하게 만들어서 공정 계획대로 진공 시스템을 운전하는 것을 불가능하게 만든다. 물은 일반적인 기체와는 성격이 아주 다르다. 다른 기 체 분자들의 흡착 에너지가 ~0.3 eV이고 기름분자가 ~1 eV 정도인 것에 반해 물은 0.55 eV 내외로 상온에서도 비교적 흡착을 잘하고 또 적당히 방출도 일어나는 특별한 특성 때문에 용기 압력을 지배하면서도 신속한 배기를 방해한다. 만일 이런 물의 흡착률 및 방출률을 제대로 수치화할 수 있다면 배기 계산을 훨씬 현실화할 수 있다. 물의 흡착률은 물분자의 부착계수가 지배하고 방출률은 체류시간에 의해 결정되지만 표면상태에 따라 천차만별이므로 얼마라고 확정하기 어렵다. 우선 이번에는 물의 부착계수 최대값을 0.1 정도로 잡고 흡착량에 따라 직선적으로 줄어드는 것으로 가정하며, 물의 표면 체류시간도 몇 가지 값으로 가정해서 0-D 입자 평형 계산을 수행하여 특정 시스템에서 얻은 실험 결과와 비교하려고 한다. 앞으로 몬테카를로 방법과 연계하여 3차원적 분석을 할 수 있는 코드로 발전시켜 나갈 예정이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1285-1293
• /
• 1992

The fracture behavior of glass/epoxy plain woven composite plates containing circular holes is experimentally investigated to examine the effects of hole size and specimen width on notched tensile strength. It is shown in this paper that the characteristic length according to the point stress criterion depends on the hole size and specimen width. For predicting the notched tensile strength, a modified failure criterion is developed. An excellent agreement is found between the experimental results and the analytical prediction of modified failure criterion. The notched strength and the characteristic length have an increase and decrease relations. When the unstable fracture occured, the critical crack length equivalent for the damage zone size at the edge of hole is about twice the characteristic length. The critical energy release rate G$_{c}$ is independent of hole size(0.03 .leq. 2R/W .leq. 0.5) under the same specimen width. However G$_{c}$ increases with an increase in specimen width which can be explained by stress relaxation due to the notch insensitivity.ity.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.69-76
• /
• 2021

This study is to identify the mineralogical properties of caprock samples from drilling cores of the Pohang basin, which is the research area for the demonstration-scale CO2 storage project in Korea. The interaction of water-rock-gas that can occur due to CO2 injection was identified using geochemical modeling. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of pore water were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 14.0.1 geochemical simulator. Two steps of modeling enabled prediction of immediate changes in the caprocks impacted by the first stage of CO2 injection and the assessment of long-term effects of sequestration. Results of minerlaogical analysis showed that the caprock samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, kaolinite and montmollonite. After the injection of carbon dioxide, the porosity of the caprock increased due to the dissolution of calcite, and dawsonite and chalcedony were precipitated as a result of the dissolution of albite and k-feldspar. In the second step after the injection was completed, the precipitation of dawsonite and chalcedony occurred as a result of dissolution of calcite and albite, and the pH was increased due to this reaction. Results of these studies are expected to be used as data to quantitatively evaluate the efficiency of mineral trapping capture in long-term storage of carbon dioxide.

• Journal of the Korea Society for Simulation
• /
• v.16 no.3
• /
• pp.49-56
• /
• 2007

There are many application areas of wireless sensor networks, such as combat field surveillance, terrorist tracking and highway traffic monitoring. These applications collect sensed data from sensor nodes to monitor events in the territory of interest. One of the important issues in these applications is the existence of the radio-jamming zone between source nodes and the base station. Depending on the routing protocol the transmission of the sensed data may not be delivered to the base station. To solve this problem we propose a genetic algorithm based routing method for reliable transmission while considering the balanced energy depletion of the sensor nodes. The genetic algorithm finds an efficient routing path by considering the radio-jamming zone, energy consumption needed fur data transmission and average remaining energy level. The fitness function employed in genetic algorithm is implemented by applying the fuzzy logic. In simulation, our proposed method is compared with LEACH and Hierarchical PEGASIS. The simulation results show that the proposed method is efficient in both the energy consumption and success ratio of delivery.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.565-573
• /
• 2021

Isotherms, kinetics and thermodynamic properties for adsorption of Brilliant Green(BG), Quinoline Yellow(QY) dyes by activated carbon were carried out using variables such as dose of adsorbent, pH, initial concentration, contact time, temperature and competitive. BG showed the highest adsorption rate of 92.4% at pH 11, and QY was adsorbed at 90.9% at pH 3. BG was in good agreement with the Freundlich isothermal model, and QY was well matched with Langmuir model. The separation coefficients of isotherm model indicated that these dyes could be effectively treated by activated carbon. Estimated adsorption energy by Temkin isotherm model indicated that the adsorption of BG and QY by activated carbon is a physical adsorption. The kinetic experimental results showed that the pseudo second order model had a better fit than the pseudo first order model with a smaller in the equilibrium adsorption amount. It was confirmed that surface diffusion was a rate controlling step by the intraparticle diffusion model. The activation energy and enthalpy change of the adsorption process indicated that the adsorption process was a relatively easy endothermic reaction. The entropy change indicated that the disorder of the adsorption system increased as the adsorption of BG and QY dyes to activated carbon proceeded. Gibbs free energy was found that the adsorption reaction became more spontaneous with increasing temperature. As a result of competitive adsorption of the mixed solution, it was found that QY was disturbed by BG and the adsorption reduced.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.453-460
• /
• 2014

Fault injection attack is the process of attempting to acquire the information on-chip through inject artificially generated error code into the cryptographic algorithms operation (or perform) which is implemented in hardware or software. From the details above, the laser-assisted failure injection attacks have been proven particularly successful. In this paper, we propose an improved laser probing system for fault injection attack which is called the Dual-Laser FA tool set, a hybrid approach of the Flash-pumping laser and fiber laser. The main concept of the idea is to improve the laser probe through utilizing existing equipment. The proposed laser probe can be divided into two parts, which are Laser-I for laser cutting, and Laser-II for fault injection. We study the advantages of existing equipment, and consider the significant parameters such as energy, repetition rate, wavelength, etc. In this approach, it solves the high energy problem caused by flash-pumping laser in higher repetition frequency from the fiber laser.

• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.249-253
• /
• 2010

Resource of wireless frequency bandwidth is gradually going to be deficient due to explosive increase of traffic and saturated non-licensed frequency band such as ISM. In the contrary, many licensed frequency bands are revealed to be low in utilization by several measurement based researches. To alleviate this inefficiency, a concept of cognitive radio is suggested. Cognitive radio lets non-licensed user exploit the licensed frequency band as long as non-licensed user does not interfere licensed user and as a result, it is possible to harness wireless frequency more efficiently. IEEE 802.22 is the first standard network with cognitive radio technology and it employs Two-Stage channel sensing mechanism to accomplish both enough licensed user protection and efficient channel utilization. In this paper, we analyze the overhead of Two-Stage channel sensing mechanism and identify the influence of channel sensing time to the overhead.