• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.149-152
• /
• 2004

물 흡수선량 표준에 토대를 두고 있는 프로토콜에서는 저에너지 전자선의 경우 평행평판형이온함의 사용과 기준 선질 $^{60}$CO 감마선의 물 흡수선량 교정정수를 받은 원통형이온함을 사용하여 고에너지 전자선에서 평행평판형이온함을 교차교정하도록 권고하고 있다. 따라서 본 연구에서는 국제원자력기구의 프로토콜(IAEA TRS-398)에서 권고하고 있는 절차에 따라 저에너지 전자선에 대한 원통형이온함의 선질보정정수를 계산하고, 원통형이온함과 평행평판형이온함의 교정방법에 따른 흡수선량을 상호 비교하였다. 그 결과 전자선에너지 10 MeV 이상에서는 두 이온함간의 선량이 잘 일치하였으나 전자선에너지 6, 9 MeV에서 최대 3.3%까지 선량 차이를 보여 저에너지 전자선에서는 반드시 평형판판형이온함의 사용하여 선량측정 할 것을 권고한다. 교정방법 차이에 의한 평행평판형이온함의 선량은 서로 잘 일치하는 것으로 나타나 표준기관에서 직접 교정받은 $^{60}$Co 감마선의 물 흡수선량교정정수를 사용하여 전자선 물 흡수선량을 결정해도 큰 영향은 없을 듯하다. 또한 평행평판형이온함을 교차 교정하기 위한 전자선 에너지에 따른 흡수선량을 상호 비교한 결과 20MeV이외 12, 16 MeV의 전자선 에너지에서도 잘 일치하여 교차교정을 위한 전자선의 기준 선질에 대한 연구가 더 진행되어야 한다고 사료된다.

• 전기의세계
• /
• v.35 no.1
• /
• pp.20-26
• /
• 1986

시간오차 및 수수에너지오차의 교정방법은 많은 전력회사(또는 제어지역)이 한개의 대전력계통으로 동작하는 경우에 적용되는 것이므로 단일 회사의 전력계통에는 적용할 수 없다. 다만 한 전력회사계통도 수개의 제어지역으로 나누어질 수도 있으므로 수개의 제어지역이 Tie-line Bias control에 의하여 동작하는 경우에는 적용된다.(a) 시간오차 및 수수에너지오차를 한개 벡터의 두 성분으로 보고, 이를 하나의 제어지역i와 나머지 제어지역의 성분으로 분해가능하다. (b) 벡터 Decomposition은 2차원 Cartesian평면에 도시할 수 있으며 이를 (.epsilon., Ii)평면이라고 하였다. 이 평면에서 Ii=(-Br/6).epsilon.상에 있고, 나머지 제어지역이 지역i에 미치는 벡터성분은 선분 Ii=(Bi/6).epsilon. 상에 있다. (c) 제어지역i단독 또는 나머지 제어지역의 control action이 지역i의 시간오차 및 수수에너지오차에 미치는 영향을 관찰하고 현행 NERC 교정법도 이에 따라 도시하였다. (d) 현행 NERC교정법을 수정한 교정법을 제시하였으며, 두가지 교정법의 Regulation에너지를 비교하고 예시하였다.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.114-115
• /
• 2011

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.72-73
• /
• 2010

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.60
• /
• pp.3-10
• /
• 2006

한국의 전파연구소와 일본의 정보통신연구기구는 휴대전화와 같은 이동통신기기로부터 방사되는 전자파가 인체에 흡수되는 에너지 정도를 측정하는 전자파 흡수율(SAR) 평가에 대한 오차 연구를 공동으로 수행하고 있다. 본 논문에서는 동종의 SAR 시스템에서 프로브, 교정용 도파관 및 기준 다이폴 안테나를 상호 교체하여 교정하여 프로브의 교정인자를 구하고 유효성 검사를 통하여 교정 오차를 검증하였다. 프로브 교정에 대한 상호 오차는 0.2 dB 이하의 결과를 얻었으며, 유효성 오차는 최대 0.28 dB를 얻었다. 그러나 SAR 외삽 알고리즘이 다를 경우는 최대 0.48 dB의 상대 오차를 보였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.4
• /
• pp.657-662
• /
• 2019

The power consumption of wearable sensors and electrocardiogram regulators should be very low to extend the network lifetime and anticipated QoS( : Quality of Service) control such as error correction and authentication of data processed by WBAN( : Wireless Body Area Network) nodes is important. Therefore, QoS control is the most urgent concern to implement WBAN in health monitoring regulations. For optimal QoS control, we compare the energy efficiency and the average number of transmissions with IEEE 802.15.6 and the error correction method considering energy efficiency. The performance of the proposed error correction technique shows that the energy efficiency and the transmission rate are improved by adjusting the coding rate appropriately using the channel estimation.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.445-457
• /
• 2016

The purpose of the study is to provide frame work of efficient diagnostic and treatment protocol for the people with malpositioned pelvic which causes imbalance of body. Study subjects were grouped as experimental, comparison and control group. Each group consisted of five men and five women randomly assigned. Experimental group was to be tested with Thompson Terminal Technique, its corrective effect and the effect of maintaining the treatment. There were 43.01%p difference in effectiveness of the applied technique between Thompson Terminal Technique and Muscle Energy Technique. It indicates that Thompson Terminal Technique is more effective in treating pelvic misalignment than Muscle Energy Technique. As a result, the use of chiropractic and resistance exercises is proven to be effective for treating the imbalance of body. Also, to maximize the effect of treatment, it is preferable to apply Muscle Energy Technique after applying the Thompson Terminal Technique.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.360-368
• /
• 2006

Objective: Surface characteristics of dental materials play an important role in bacterial adhesion. The purpose of this study was to investigate surface characteristics of 5 different light-cured orthodontic adhesives (1 fluoride-releasing composite, 3 non-fluoride-releasing composites, and f resin-modified glass ionomer). Methods: Surface roughness was measured using a confocal laser scanning microscope. Contact angle and surface free energy components were analyzed using the sessile drop method. Results: Surface roughness was significantly different between adhesives despite a relatively small variation (less than $0.05\;{\mu}m$). Lightbond and Monolok2 were rougher than Enlight and Transbond XT. There were also significant differences in contact angles and surface free energy components between adhesives. In particular, considerable differences in contact angles and surface free energy components were found between resin modified glass ionomer and the composites. Resin modified glass ionomer showed significantly smaller contact angles in 3 different probe liquids and had higher total surface free energy and stronger polarity, with notably stronger basic property than the composites. Conclusion: Resin modified glass ionomer may provide a more favourable environment for bacterial adhesion than composite adhesives.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.97-105
• /
• 2009

Absorbed dose to water based protocols recommended that plane-parallel chambers be calibrated against calibrated cylindrical chambers in a high energy electron beam with $R_{50}$>7 $g/cm^2$ (E${\gtrsim}$16 MeV). However, such high-energy electron beams are not available at all radiotherapy centers. In this study, we are compared the absorbed dose to water determined according to cross-calibration method in a high energy electron beam of 16 MeV and in electron beam energies of 12 MeV below the cross-calibration quality remark. Absorbed dose were performed for PTW 30013, Wellhofer FC65G Farmer type cylindrical chamber and for PTW 34001, Wellhofer PPC40 Roos type plane-parallel chamber. The cylindrical and the plane-parallel chamber to be calibrated are compared by alternately positioning each at reference depth, $Z_{ret}=0.6R_{50}-0.1$ in water phantom. The $D_W$ of plane-parallel chamber are derived using across-calibration method at high-energy electron beams of 16, 20 MeV. Then a good agreement is obtained the $D_W$ of plane-parallel chamber in 12 MeV. The agreement between 20 MeV and 12 MeV are within 0.2% for IAEA TRS-398.

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.143-151
• /
• 1997

As the pulse heights from a NaI(Tl) detector vary with the temperature of the measuring environment a significant change in temperature may affect the energy calibration of the spectrometer. The auto-adjustment of the channel corresponding to a pulse heights can be achieved by introducing an external reference source to compensate the temperature dependency of pulse heights, but unfavorable increases of the Compton continuum are caused due to the external source. In this study, the total absorption peaks dominant in the typical environmental gamma spectrum-239 keV from $^{212}Pb$, 351 keV from $^{214}Pb$, 1460 keV from $^{40}K$ and 2614 keV from $^{208}Tl$ for examples - were used as reference in the correction of energy calibration. With these peaks, the program to calibrate the energy of the s spectrum was developed using Microsoft Visual Basic language. The program developed here was applied to the environmental spectra measured at intervals of 30 minutes in the temperature range of from $-20^{\circ}C$ to $10^{\circ}C$ to demonstrate the validity and applicability. As a result of the test, the correction scheme appeared to be effective in the temperature changes encountered in the usual environment.