• 기계와재료
• /
• v.23 no.3
• /
• pp.156-163
• /
• 2011

쥴톰순 냉동기는 스터링 냉동기, GM 냉동기, 스터링형 및 GM형 맥동관 냉동기 등 기계적 극저온냉동기에 비해 단순한 구조, 수 초의 급속한 냉각특성을 장점으로 중대형의 가스액화사이클 뿐만 아니라 적외선검출기의 급속냉각, 저온수술 등 다양한 분야에서 널리 사용되어지고 있다. 일반적으로 100K 이하의 작동온도 및 수 초 수준의 빠른 냉각을 요구하는 적외선검출기의 냉각을 위해서는 수 백기압 이상 고압의 질소 및 아르곤 가스를 사용하는 쥴톰슨 냉동기가 주로 사용되고 있다. 쥴톰슨 냉동기는 핀-관(fin-tube) 형태의 열교환기와 열교환기의 구조적 기반을 제공하는 멘드렐(mandrel), 쥴톰슨 노즐 등으로 구성되며, 열교환기의 열전달 성능 및 유량조절기구의 특성은 냉동기 저온부의 냉각온도, 냉각시간 및 운전시간에 큰 영향을 미친다.

• KSBB Journal
• /
• v.10 no.3
• /
• pp.304-316
• /
• 1995

For fuel alcohol production, enzymatic liquefaction and saccharification of tapioca starch by ${\alpha}$-amylase and glucoamylase were studied. The thermophilic ${\alpha}$-amylase Termamyl produced from Bacillus licheniformis gave a better liquefaction than the relalively low temperature enzyme BAN from B. subtilis. Oplimal temperature and pH with Termamyl were $90∼95^{\circ}C$ and 5.8, respectively. Minimal amount of Termamyl 240uc for a satisfactory liquefaction for a two-hour reaction was about 0.0125% (v/w) with respect to the mass of tapioca used. For saccharification experiments two enzymes, Novo AMG and Do-I1 enzymes were compared. The enzymatic activity of each enzyme was a little different depending on the substrate used and the latter was found to have a significant amount of ${\alpha}$-amylase activity. With Novo AMG optimal temperature was about $58^{\circ}C$ The pH optimum was 4.3 with maltose, however, with tapioca, no difference was observed between pH 4.3 and 5.7 which is a natural, unadjusted pH of liquefied tapioca. For 85% of completion of saccharification, it was necessary to use 0.0625% (v/w) of Novo AMG 400L for tapioca and to run the reaction for more than 10 hr, Packed volume of solid particles in tapioca slurry remained at around 30% during liquefaction and saccharification. This indicates that the removal of the solid particle before fermentation is not economically feasible at all, even though the solid particles make it very difficult to operate the bioreactor in a continuous mode with cell-recycle.

• Journal of Korean Institute of Fire Investigation
• /
• v.5 no.1
• /
• pp.21-24
• /
• 2004

본 연구는 가스시설에서 가장 중요한 기능을 하는 압력조정기가 가스공급압력을 연소기에 적합하게 조정압력을 높이거나 낮추어 일정하게 공급하여 연소가 정상적으로 이루어지도록 기능을 하고 있다. 압력조정기는 가장 보편화되어 있는 가정용 압력조정기인 l단감압식저압조정기를 비롯하여 자동절체식일체형저압조정기 등 여러 가지 형태가 사용되어지고 있다 LP가스압력조정기와 관련된 사고는 입구측니플 풀림, 내부부식, 밸브시트손상, 다이아프램손상 등 다양한 결함에 의해서 발생하고 있다. 압력조정기의 사고는 10년도안 전체사고의 5%를 차지하며, 주로 하절기인 6월부터 9월까지 사고가 많아 발생하였다 따라서 일반가정에서 가장 많아 사용하고 있는 1단감압식저압조정기를 대상으로 연구하였다.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.439-446
• /
• 2003

Various volume of water for the optimal brewing condition of the Korean distilled liquor produced by liquefaction of rice and corn starch was investigated Pilot brewings were carried out by the liquefaction of 5kg of rice and 10kg of corn starch with 150%, 200% and 250% of water regarding the amount of rice and corn starch. The pH, alcohol production and total acidity were normal during the fermentation process. The yield was proportional to the amount of water added and the highest yield was obtained by 250% of water addition without loss of quality. All the test results were not significantly different by the one-way ANOVA and Duncan's multiple range test at p<0.05 and the flavor profiles were also not different according to the amount of water added. As a result, 250% of water addition was the most economical and optimal brewing condition in this study.

• Clean Technology
• /
• v.20 no.3
• /
• pp.314-320
• /
• 2014

The purpose of this work is to optimize composition of mixture refrigerants used in the C3MR (Propane & Mixed Refrigerants) process by a statistical optimization technique. C3MR studied in this work is one of widely used commercial natural gas liquefaction processes with high efficiency. Process simulation was performed in a commercial process simulator and methane ($C_1$), ethane ($C_2$), propane ($C_3$), and nitrogen ($N_2$) were selected as mixed refrigerants. Using the process model, optimum composition of refrigerants mixture was determined via mixture design and central composite design to produce minimum energy consumption. As a result, it was confirmed that energy consumption is reduced down to 11.3% comparing to existing design. It was also compared with heat effectiveness through temperature profile of MCHE (main cryogenic heat exchanger).

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.89-94
• /
• 2016

The number of camping population and sites are rapidly increasing with to the expansion of camping culture and the advancement of leisure culture. It is necessary to develop an effective strategy of safety management, as a lot of accidents occur due to the increase of population and sites for camping. Particular attention needs to be paid for accident prevention in the increasing accidents of explosion awing to the overheating of bytane gas, and carbon monoxide poisoning due to the use of non-ventilated areas. In this study, the direction of safety management strategy is analyzed by a survey and analysis of risk factors in campsite about gas facilities and gas appliances in camp site. Accordingly, some directions are suggested. Conclusively, it is expected that the results of this study could help to improve efficiency management for camping.

• Journal of the Korean Institute of Gas
• /
• v.28 no.2
• /
• pp.47-55
• /
• 2024

More than 100 liquefied hydrogen tanks are expected to be introduced in Korea by 2030. Since liquefied hydrogen is stored in a vacuum insulation structure tank at -253℃, there is a possibility of a major disaster in which the tank bursts if there is a problem with insulation. Therefore, the law stipulates that PRV should be installed as the last bastion. It is important to note that in the case of liquefied hydrogen, it becomes useless if the pressure drop of the pipe is ignored and the capacity is calculated incorrectly. In CGA S-1.3, the pressure drop rate of the PRV inlet and outlet pipes is set to less than 3% and less than 10%, respectively. However, there is an interdependence between the amount of pressure drop and the flow rate of the pipe, making it impossible to calculate these values at once. Therefore, we developed a simulator that calculates the pressure loss rate of PRV system using MATLAB/Simulink and evaluated the sensitivity of the pressure drop rate to design elements.

• Journal of the Korean Institute of Gas
• /
• v.17 no.3
• /
• pp.27-32
• /
• 2013

Natural gas liquefaction process which is operated under cryogenic condition spends large amount of energy. Most of energy in the natural gas liquefaction process is consumed by compressors. Therefore, minimizing energy consumption of compressors is an important issue in process design and operation. Among various natural gas liquefaction processes, propane pre-cooled mixed refrigerant (C3MR) process consists of mixed refrigerant system and pure refrigerant system. In this study, to find the optimal design of pure refrigerant system, pure refrigerant cycle is simulated on different number of pressure levels and the necessary energy of each design is compared. After that, the driver selection model is applied to analyse each processes, which has different number of equipments, in terms of cost. As the result, the design using many equipments spends lower energy. Using this result, this study suggests standard of process design selection by the cost term.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.37-37
• /
• 2014

유증기 처리 설비에서 발생하는 황화합물의 황산화 현상에 따른 부식손상은 설비의 안전운영 및 유지보수 공정에 영향을 미치는 주요 원인이며, 이에 대한 대책이 필요한 실정이다. 본 연구에서는 실제 유증기 가스 및 설비공정 상에서 발생되는 침출수를 채취하여 각각의 성상을 분석하고 부식을 일으킬 수 있는 황산화 현상에 대한 연구를 수행하였다. 또한, 발생 유증기의 액화에 따른 침출수의 배관부식 영향성을 확인하기 위하여 배관용 강관재료에 대한 무게감량시험 및 전기화학시험을 통해 침출수 pH 조건에 따른 부식경향성을 평가함으로써 유증기 처리설비의 부식방지 대안을 제시하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.242-242
• /
• 2013

현재 크라이오펌프의 주요 관심기술은 생산성 향상을 위한 급속 재생기술의 확보와 극저온 냉동기의 효율 향상 기술 및 저진동 기술의 확보이다. 크라이오펌프는 크게 냉동기 모듈과 펌프모듈로 구성되고, 냉동기 모듈은 주로 G-M 극저온 냉동기, Stirling 극저온 냉동기 또는 맥동관 극저온 냉동기 등을 사용하는데, 이것은 주로 압축기, 왕복기, 재생기, 구동장치 등으로 펌프모듈은 cryoarray와 펌프 body로 구성된다. 최근에 구조가 간단하고 장수명 및 저진동의 장점을 가진 맥동관 극저온 냉동기의 효율이 급속히 증가함에 따라 초전도, 액화 등의 분야에서 기존의 G-M 극저온 냉동기를 대체하는 추세이다. 본 연구에서는 지식경제부 제조기반산업원 천기술사업 "급속재생형 저진동 크라이오펌프 개발" 사업을 통해 급속 재생, 저진동, 고신뢰성 확보를 위해 기존의 G-M 극저온 냉동기를 맥동관 극저온 냉동기로 대체 적용 개발 및 국산화를 도모하고자 한다. 또한 상용화에 따른 공정 개발을 소개하고자 한다.