• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.6
• /
• pp.531-548
• /
• 2006

The purpose of this study was to investigate the biomechanical, histologic findings of distracted regenerate and TMJ response in modified distraction osteogenesis (DO) technique combined with compression force as biomechanical stimulation method which has been suggested in 2002, and developed thereafter by authors. This study was performed with two experiments. First experiment was designed to explore the optimal ratio of compression force versus distraction force for the new DO technique. Second experiment was planned to evaluate the reaction of TMJ tissue, especially condyle, disc after application of the DO technique with compression force. Total 52 New Zealand adult male-rabbits with 3.0kg body weight were used for the study. For the first study, 30 adult male-rabbits underwent osteotomy at one side of mandibular body and a external distraction device was applied on each rabbit with same manner. In the control group of 10 rabbits, final 8 mm of distraction with 1 mm rate per day was done with conventional DO technique after 5 latency days. For the experimental group of 20 rabbits, a compression force with 1 mm rate per day was added to the distracted mandible on 3-latency day after over-distraction (over-lengthening). As the amount of the rate of compression versus distraction, experimental subgroup I (10 rabbits) was set up as 2 mm compression versus 10 mm distraction (1/5) and experimental subgroup II (10 rabbits) was set up as 3 mm compression versus 11 mm distraction (about 1/3). All 30 rabbits were set up to obtain final 8 mm distraction and sacrificed on postoperative 55 day to analysis on biomechanical, and histologic findings of the bone regenerates. For second study, 22 adult male-rabbits were used to evaluate TMJ response after the DO method application with compression force. In the control group, 10 rabbits was used to be performed with conventional DO method, on the other hand, in a experimental group of 10 rabbits, 10 mm distraction with 2 mm compression (1/5 ratio) was done. The remaining 2 rabbits served as the normal control group. Histomorphologic examinations on both condyle, histological studies on condyle, disc were done at 1, 2, 3, 4, 7 weeks after distraction force application. The results were as follows: 1. On the bone density findings, the experimental group II (force ratio - 1/3) showed higher bone density than the other experimental group (force ratio - 1/5) and control group (control group - $0,2906\;g/cm^2$, experimental group I - $0.2961\;g/cm^2$, experimental group II - $0.3328\;g/cm^2$). 2. In the histologic findings, more rapid bone maturation like as wide lamellar bone site, more trabeculae formation was observed in two experimental groups compared to the conventional DO control group. 3. In morphologic findings of condyle, there were no differences of size and architecture in the condyle in the control and experimental groups. 4. In histologic findings of condyles, there were thicker fiberous and proliferative layers in experimental group than those of control group until 2 weeks after distraction with compression force. But, no differences were seen between two groups on 3, 4, 7 weeks after compression. 5. In histologic findings of disc, more collagen contents in extracellular matrix, more regular fiber bundles, and less elastin fibers were seen in experimental group than control group until 2 weeks after distraction with compression. But, no differences were seen between two groups on 3, 4, 7 weeks after distraction with compression. From this study, we could identify that the new distraction osteogenesis technique with compression stimulation might improve the quality of bone regeneration. The no remarkable differences on TMJ response between control and experimental groups were seen and TMJ tissues were recovered similarly to normal TMJ condition after 3 weeks.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.785-792
• /
• 2005

This study is to examine the influence of defective grain shape of coarse aggregate and lowered fineness modulus of fine aggregate on the characteristics of high flowing concrete. The flow ability and compact ability of high flowing concrete was examined using fine aggregate, varying its fineness modulus to 2.0, 2.5, 3.0, and 3.5, and coarse aggregate with before and after grain shape improvement. Also the influence of fineness modulus of fine aggregate and grain shape of coarse aggregate on dispersion distance of particles of aggregate was examined by relatively comparing the dispersion distance between particles of aggregate. According to the experimental result, minimum porosity when mixing fine aggregate and coarse aggregate was shown in order of fineness modulus of fine aggregate, 3.0, 2.5, 2.0, 3.5, regardless of the improvement of grain shape. So when the fineness modulus is bigger or smaller than KS Standard $2.3\~3.1$, the porosity increased. When the spherical rate of the grain shape of coarse aggregate unproved from 0.69, a disk shape to 0.78 sphere shape, the rate of fine aggregate, which represents minimum porosity, decreased $6\%$ from $47\%\;to\;41\%$. The 28 days compressive strength according to fineness modulus of fine aggregate increased about 3 ma as the fineness modulus increased from 2.0 to 2,5, and 3.0. However, the 28 days compressive strength decreased about 9 ma at 3.5 fineness modulus as compared with 3.0 fineness modulus. The improvement of grain shape in coarse aggregate and increase of fineness modulus in fine aggregate made the flow ability, compact ability, and V-rod flowing time improve. Also the fineness modulus of fine aggregate increased the paste volume ratio when a higher value was used within the scope of KS Standard $2.3\~3.1$.

• Journal of the Korean earth science society
• /
• v.34 no.4
• /
• pp.313-328
• /
• 2013

Jurassic granitoids in the northeastern part of the Yeongnam Massif are possibly the result of intensive magmatic activities that occurred in response to subduction of the proto-Pacific plate beneath the northeast portion of the Eurasian plate. Geochemical studies on the granitic rocks are carried out in order to constrain the petrogenesis of the granitic magma and to establish the paleotectonic environment of the area. Whole rock chemical data of the Uljin granitoids in the northeastern part of the Yeongnam Massif indicate that all of the rocks have the characteristics of calcalkaline series in subalkaline field. The overall major element trends show systematic variations in each granitic body, but the source materials of each granitoids seem to have different chemical composition. The Uljin granitoids are different from other granitic rocks, which distributed vicinity of the study area, in the contents of $Al_2O_3$ and trace elements such as Cr, Co, Ni, Sr, Y and Nb. The Uljin granitoids have geochemical features similar to slab-derived adakites such as high $Al_2O_3$, Sr contents and high Sr/Y, La/Yb ratios, but they have low Y and Yb contents. The major ($SiO_2$, $Al_2O_3$, MgO) and trace element (Sr, Y, La, Yb) contents of the Uljin granitoids fall well within the adakitic field. The Uljin granitoids have similar geochemical characteristics, paleotectonic environments and intrusion ages to those of the Yatsuo plutonic rocks of Hida belt located on northwestern part of Japan. Chondrite normalized REE patterns show generally enriched LREEs ($(La/Yb)_{CN}=10.6-103.4$) and are slight negative to flat Eu anomalies. On the ANK vs. A/CNK and tectonic discrimination diagrams, parental magma type of the granites corresponds to I-type and volcanic arc granite (VAG). Interpretations of the chemical characteristics of the granitic rocks favor their emplacement in a compressional tectonic regime at the continental margin during the subduction of Izanagi plate in Jurassic period.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.6
• /
• pp.307-317
• /
• 2002

In this paper we propose a new mesh reconstruction scheme that produces a displaced subdivision surface directly from unorganized points. The displaced subdivision surface is a new mesh representation that defines a detailed mesh with a displacement map over a smooth domain surface, but original displaced subdivision surface algorithm needs an explicit polygonal mesh since it is not a mesh reconstruction algorithm but a mesh conversion (remeshing) algorithm. The main idea of our approach is that we sample surface detail from unorganized points without any topological information. For this, we predict a virtual triangular face from unorganized points for each sampling ray from a parameteric domain surface. Direct displaced subdivision surface reconstruction from unorganized points has much importance since the output of this algorithm has several important properties: It has compact mesh representation since most vertices can be represented by only a scalar value. Underlying structure of it is piecewise regular so it ran be easily transformed into a multiresolution mesh. Smoothness after mesh deformation is automatically preserved. We avoid time-consuming global energy optimization by employing the input data dependant mesh smoothing, so we can get a good quality displaced subdivision surface quickly.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.53-55
• /
• 2004

In emergency cases, such as the severe trauma involving the fracture of skull, spine, or cervical bone, from auto accident or a fall, and/or pneumothorax which can not be diagnosed exactly by the eye examination, it is necessary the radiological examination during transferring to the hospital for emergency care. The aim of this study was to design and evaluate the prototype of mobile medical image communication system based on CDMA 1X EVDO. The system consists of a laptop computer used as a transmit DICOM client, linked with cellular phone which support to the CDMA 1X EVDO communication service, and a receiving DICOM server installed in the hospital. The DR images were stored with DICOM format in the storage of transmit client. Those images were compressed into JPEG2000 format and transmitted from transmit client to the receiving server. All of those images were progressively transmitted to the receiving server and displayed on the server monitor. To evaluate the image quality, PSNR of compressed image was measured. Also, several field tests had been performed using commercial CDMA2000 1X-EVDO reverse link with the TCP/IP data segments. The test had been taken under several velocity of vehicle in seoul areas.

• Progress in Medical Physics
• /
• v.20 no.2
• /
• pp.80-87
• /
• 2009

Phase transformation, superelastic characteristics and variation of surface residual stress were studied for Nitinol shape memory alloy through application of UNSM technology, and life extension methods of stent were also studied by using elastic resilience and corrosion resistance. Nitinol wire of ${\phi}1.778$ mm showed similar surface roughness before and after UNSM treatment, but drawing traces and micro defects were all removed by UNSM treatment. It also changed the surface residual stress from tensile to compressive values, and XRD result showed less intensive austenite peak and clear martensite and additional R-phase peaks after UNSM treatment. Fatigue resistance could be greatly improved through removal of surface defects and rearrangement of surface residual stress from tensile to compressive state, and development of surface modification system to improve not only bio-compatability but also resistance to corrosion and wear will make it possible to develop vascular stent which can be used for circulating system diseases which run first cause of death of recent Koreans.

• Journal of Sericultural and Entomological Science
• /
• v.25 no.2
• /
• pp.44-50
• /
• 1984

The effects of sodium pyrophosphate, sodium tripolyphosposphate and ethylene diamine tetraacetic acid as a degumming aid reagent were investigated under the conditions of underground water and dimineralized water for the scouring water sources. The changes of water qualities by adding the condensed sodium phosphates and the physical properties of scoured silk fabric were examined, respectively. 1. The water hardness of underground water was decreased by adding the condensed sodium phosphates and it was further reduced according to the increasing temperature. The water hardness reducing power of sodium pyrophosphate was a little stronger than that of sodium tripolyphosphate. 2. The sodium silicate as an alkaline reagant for scouring decreased the water hardness, but the sodium carbonate increased it in the underground water. 3. The pH value of 0.4% soap and 0.25% sodium silicate mixed solution after boiling was. 9.80, but it was leveled upto 9.90 by adding 0.05% sodium pyrophosphate and upto 9.95 by 0.02% ehtylene diamine tetraacetic acid, respectively. 4. The masking action of Fe$\^$3+/ ions dissolved in the scouring water was more remarkable by ethylene diamine tetraacetic acid than by the condensed sodium phosphates. Of the condensations, sodium tripolyphosphate was more effective than sodium pyrophosphate in the action. 5. Genrally, the dimineralized water scouring increased the boil-off ratio with reducing the flexural rigidity of fabric which was negatively related with the favorablility of hand-touch more than the underground one did. 6. Under the underground water scouring, the addition of ethylene diamine tetraacetic acid increased the boil-of ratio and compressive elasticity of fabric with reducing the flexural rigidity more than that of the condensed sodium phosphates did. 7 The additions of sodium tripolyphosphate and ethylene diamine tetraacetic acid reduced the flexural rigidity of fabric with raising the boil-off ratio even in the dimineralized water scouring, but there was no sifnificant difference between both of them.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.65-75
• /
• 2013

Movie captured audience's whole sense organs to the screen which is made up of visual story-telling decorated by color, sound, and smell. The audience rediscovered native emotions(pleasure, fear, terror) suppressed and left in the compressed world of space and time, that is to say a movie world separated from the real world, by being immersed in the movie story. This study revealed audience's feelings of pleasure and fear by analyzing the movie . First of all, the pleasure would be discussed in terms of Nietzsche's "the will to power." Nietzsche defined something to breathe, move, and will as being alive, and he insisted that its power to life is 'the will to power.' Human beings wish to have power and want to increase it: pleasure, the real motivation of human behaviors and phenomena. The movie well revealed the pleasure by showing nonperson's challenge and victory against social rulers. Second, the fear and terror of the audience will be discussed in terms of in Lacan's psychoanalysis. Lacan extended Freud's id, ego, and superego into the worlds of reality, imagine, and symbol, and suggested a father in symbol world among those worlds. He suggested as a basic and connecting instrument of the socialization just like Signifi$\acute{e}$ and Signifiant, Saussure' basic linguistic structure in "Cours de lingustique g$\acute{e}$n$\acute{e}$rale"(1916). Because father is the symbol and the metaphor of law, the absence of him and resistance against him means obstacles of social stabilization. Finally this paper will also discuss that the fear from the absence of law and the pleasure provoked by self-preserving instincts, that is to say natural feelings, are connected to values of progressivism and conservatism.

• Cartoon and Animation Studies
• /
• s.30
• /
• pp.139-168
• /
• 2013

This article aims to explain the significance and value of cartoons in the 1910s which were largely passed unnoticed in the preceding cartoon studies by scrutinizing cartoons published in Maeilsinbo in the 1910s. Until now, Korean cartoons in the 1910s has been neglected just because it were published in Maeilsinbo. However, this writing analyzed cartoons in this period on the base of the fact that the cartoons in the 1910s printed in Maeilsinbo diversified the horizon of the Korean cartoon. Cartoons in Maeilsinbo functioned as a bridge connecting cartoons published in Daehanminbo in 1909 reputed as a root of Korean cartoon and 1920s, the time when satirical cartoons and comics started being printed in newspapers. The characteristics of Maeilsinbo as a bulletin of government general and periodical characteristics that the agent of popular culture begun to move reside as multi layers in the cartoons in the 1910s. In this article, the process and the development of how cartoons published in Maeilsinbo. As pleasure became important in everyday life in Korea, cartoons were able to earn a portion in the newspaper. In the beginning, modern cartoon style seemed vague, but as time goes by, its own style gradually settled. Cartoons in this period were not fixed in specific section but various kinds of cartoons were developed during the time since works of Korean as well as Japanese cartoonists and illustrators were published. Among them, representative cartoons in Maeilsinbo were analyzed in this article under three categories: first, cartoons represented 'Choseon-ness' through scenes of daily life and customs concurrently contained a view of anti-civilization/enlightenment; second, cartoons represented the accumulation of wealth as valid from the view point of public interest; last, cartoons divided Koreans who suffered from hardships of life in Kyungsung and Japanese in Jingogae in order to divide space. In conclusion, Maeilsinbo disciplined the colonized, Koreans, and exposed the discourse of the colonial power via cartoon.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.529-535
• /
• 2016

In this theoretical study, the strength parameters of the Drucker-Prager yield criterion and Mohr-Coulomb yield criterion were set to equal values, in order to analyze the correlation among the parameters. The Drucker-Prager strength parameters ${\alpha}$ and k were represented by the Mohr-Coulomb strength parameters c and ${\phi}$. Specifically it can be seen that k is function of c, ${\phi}$ and ${\alpha}$ is function of ${\phi}$ alone. Drucker-Prager strength parameter ${\alpha}$ increases as the internal friction angle of soil increases. ${\alpha}_{av}$ which is the average of ${\alpha}_c$ and ${\alpha}_i$ was proportional to internal friction angle in which ${\alpha}_c$ and ${\alpha}_i$ are ${\alpha}$ values corresponding to the circles of the Drucker-Prager yield cirteria circumscribes and inscribes the Mohr-Coulomb yield criterion respectively. The values of the ${\alpha}_{av}$ was 0.07 and 0.29 which correspond to the internal friction angle of $10^{\circ}$ and $45^{\circ}$ respectively. In addition, value of ${\alpha}_c/{\alpha}_i$ was proportional to internal friction angle of soil and the values of ${\alpha}_c/{\alpha}_i$ 1.12 and 1.62 which corresponds to internal friction angle of $10^{\circ}$ and $45^{\circ}$ respectively.The influence of the Mohr-Coulomb strength parameters on the Drucker-Prager strength parameter k was investigated and it was found that k was mainly influenced by the cohesion of the soil, except in the case of the minimum assumed value of c of 10kPa. The deviator stresses, $S_{c0}$ and $S_{t0}$, which correspond to the cases of the Mohr-Coulomb yield criterion under uniaxial compression and uniaxial tension, respectively, and $S_{0(ave)}$, which is the average value of $S_{c0}$ and $S_{t0}$, decrease as the internal friction angle increases. Furthermore, the hexagon, which represents the Mohr-Coulomb yield locus, becomes more irregular, and the deviations of $S_{c0}$ and $S_{t0}$ from $S_{0(ave)}$ also increase, as the internal friction angle increases.