• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.33-38
• /
• 2001

This study aims to systematically research the various phenomena which arise from compression molding of fiber reinforced plastic composites. Long fiber reinforced plastic composites are rib type compression molded in order to measure the orientation in products, and the specimens are photographed with soft X-ray. The intensity of the photograph is applied by an image scanner, and the fiber orientation distribution of products is measured by using an image processing technique.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2182-2195
• /
• 1996

Densification characteristics and behavior of tool steel powder compact during high temperature forming processes were investigated under pressure less sintering, sinter forging and hot isostastic pressing. In pressureless sintering, full density was obtained at a closely controlled temperature near the solidus of the material. Finite element calculations from constitutive model for densification by power law creep and diffusional flow were compared with experimental data. Agreements between theoretical calculations and experimental data were good in hot isostatic pressing but not as good in sinter forging.

• 한국공작기계학회논문집
• /
• 제10권2호
• /
• pp.103-114
• /
• 2001

During a compression molding process of Unidirectional Fiber Reinforced Plastic Composites, control of filling patterns in mold and distribution of fiber is needed to predict the effects of molding parameters on the flow characteristics. To obtain an excellent product and decide optimum molding conditions, it is important to know the relationship between molding conditions and viscosity. In this study, the anisotropic viscosity of the Unidirectional Fiber Reinforced Plastic Composites is measured by using the parallel plastometer. The model for flow state has been simulated by using the viscosity. The composites is treated as an incompressible New-tonian fluid. The effects of longitudinal/transverse viscosity ration A and slip parameter $\alpha$ on buldging phenomenon and mold filling patterns, are also discussed.

• Composites Research
• /
• 제33권5호
• /
• pp.302-308
• /
• 2020

본 연구는 탄소 복합소재를 이용하여 오토클레이브와 진공백(Vacuum Bag Only) 공정으로 소재의 열전도 계수를구하고 경화 거동 모델을 통해 표면부와 내부의 경화 거동을 예측 및 비교하였다. 공정에 따른 열전도 계수의 변화로 인해 내부 온도가 표면부와 차이를 보였다. 오토클레이브 공정의 경우 높은 열전도 계수를 통하여 표면부와 내부의 온도는 거의 일치를 하였으며, 경화 거동 역시 유사하게 진행이 되었다. 하지만, 진공백 공정의 경우 표면부와 내부의 경화 거동이 많은 차이를 보였다. 이 차이는 부품 내부의 품질 및 공기 배출에 영향을 준다. 기계적 물성 차이를 확인하고자 0도 단방향 시편으로 압축시험을 수행하였고, 그 결과 진공백 성형이 조금 낮은 물성을 갖는다는 것을 확인하였다.

• 공업화학
• /
• 제19권3호
• /
• pp.345-350
• /
• 2008

고분자함침콘크리트(PIC)는 물리화학적 물성뿐만 아니라 기계적 강도가 우수한 재료로서 성형된 일반 콘크리트를 변조하여 제조한다. PIC 제조공정은 성형된 공시체의 건조, 단량체의 함침, 중합공정으로 구성된다. PIC 제조공정 중 고분자 중합공정은 지금까지 주로 열 및 수중중합방법을 사용하여 콘크리트 내부의 온도구배가 크고 라디칼 생성이 억제되어 불균일한 중합을 초래하였다. 본 연구에서는 마이크로파를 이용한 중합 반응기를 제작하여 스티렌/메틸메타아크릴레이트(MMA) 1 : 1의 혼합물을 단량체로 사용한 PIC 제조의 중합공정에 사용하였다. 그 결과 열중합보다 매우 균일한 PIC를 제조할 수 있었으며, 30% 이상 중합도가 증가하였고, 공시체보다 기계적 압축강도는 600% ($800{\sim}1200kg_f/cm^2$)까지 증가하였으며, 내산성은 20% 이상 증가하였다. 또한 개시제는 1% 이하로 사용할 수 있었고 중합의 최적 조건은 400 W, 2450 MHz의 radiation 조사로 최적 온도는 $120^{\circ}C$였다.

• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.217-222
• /
• 2008

Equal channel angular pressing (ECAP) is one of the effective methods to produce bulk-nano materials by accumulating plastic strain into the workpiece without changing its cross-sectional shape in the multi-pass processing. However, the forming load becomes higher for manufacturing large specimens using conventional solid or split dies because of friction, flash formation, and usage of dummy specimen. In the present investigation, better split die was designed to reduce the forming loads and improve the geometrical accuracy of the specimen in the multi-pass ECAP. The new die exit channel was also designed to reduce the friction effect. Experiments with AA1050 specimens with a square cross-section were carried out to examine the design goal using the proposed split dies for routes A and C up to four passes. The numerical forming simulations were used to determine the effective geometry of various die models in the present work.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1140-1151
• /
• 2004

This paper reports on the finite elements analysis for die compaction process of cemented carbide tool parts. Experimental data were obtained under die compaction and triaxial compression with various loading conditions. The elastoplastic constitutive equations based on the yield function of Shima and Oyane were implemented into an explicit finite element program (ABAQUS/Explicit) and implicit finite element program (PMsolver/Compaction-3D) to simulate compaction response of cemented carbide powder during die compaction. For simulation of die compaction, the material parameters for Shima and Oyane model were obtained by uniaxial die compaction test. Explicit finite element results were compared with implicit results for cemented carbide powder.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.3084-3090
• /
• 1994

A new flow model is developed for the analysis of compression molding of sheet molding compounds(SMC) and penalty finite element formulation is presented to predict flow front progressions more accurately. In this model SMC is assumed nonisothermal fluid, which has different viscosities in extension and in shear. The flow is allowed to slip at the mold and is resisted by friction force which is proportional to the relative velocity at mold surface. For the verification of the model, the press force and flow patterns are compared with those of experiments and available results by other works in this field. It is also demonstrated, using the computational procedure described and the proposed model, that optimal initial charge shapes for the filling can be effectively computed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.61-69
• /
• 2024

고가의 혼화재 투입 없이 원심성형 공정 활용으로 콘크리트의 수밀성 증대를 통한 콘크리트 압축강도가 100MPa급인 초고강도 프리스트레스 각형보를 개발하였다. 피암터널 상부구조로 개발된 원심성형 각형보를 지역 소하천의 라멘교에 시공하였으며, 본 연구에서는 정적재하시험을 통하여 계측한 결과와 대상 구조물의 수치해석 결과를 바탕으로 비교, 분석하여 원심성형 각형보 라멘교의 공용내하력과 안전성을 평가하였다. 본 교량의 정·동적 재하시험과 수치해석 결과가 유사하게 나타났으며 원심성형 각형보의 거동을 잘 모사하는 것으로 확인되었다. 합성 라멘교를 구성하는 모든 원심성형 각형보는 설계활하중 하에서 충분한 내하력을 확보하는 것으로 평가되었고 안전성을 확보하여 구조적인 신뢰성을 입증하였다.

• 한국정밀공학회지
• /
• 제17권6호
• /
• pp.127-134
• /
• 2000

The current three-stage cold farming process to produce a flange is investigated for the purpose of improvement of manufacturing process. The main goal of this study is to obtain an appropriate process sequence, which can produce the required part with less manufacturing cost. The current process sequence is simulated using finite element method and design criteria are examined. Based on the results of simulation of the current three-stage process. a design strategy for improving the process sequence is analyzed using the thick-walled pipes. Because it has a reduced process-sequence without buckling of the workpiece or overloading of tools, the new process has distinct advantages over the conventional process. Numerical results show that the newly proposed process with selected presses is the most economical way to produce the required part.