• Journal of Environmental Impact Assessment
• /
• v.32 no.4
• /
• pp.242-250
• /
• 2023

The continuity of urban space is being destroyed by disorderly high-rise development caused by reckless development, and the resulting deterioration of urban landscape is emerging as a major problem. Disordered high-rise development is adversely affecting the urban environment, such as depriving residents of the basic rights of view and sunlight and privatizing the scenery that urban residents should enjoy together. In order to create a continuous urban landscape, indiscriminate high-rise development is restricted and compensation for the affected areas is needed. Various regulations have been carried out to this end, but it is difficult to overcome the pressure and damage to high-rise development by regulations alone. Accordingly, discussions have been underway to introduce a compensation system. Among them, discussions on the introduction of a 'Transfer of Development Right' (TDR) in which land ownership and development rights are separated and compensated for development rights have been drawing attention. However, in Korea, it is difficult to introduce the system due to various problems related to the separation of development rights. In order to overcome the limitations of the introduction of TDR, this paper analyzed the concepts and characteristics of 'Real Estate Investment Trusts' (REITs) and presented a policy model for the development right transfer system incorporating REITs for effective landscape management.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.11
• /
• pp.1323-1329
• /
• 2011

The purpose of study was to analyze how the visual information affects balance control of individuals during single leg stance. A total of 27 young normal people (20 males and 7 females, age: $13.7{\pm}2.6$, height: $162.3{\pm}13.2$ cm, weight: $53.9{\pm}13.9$ kg) was voluntarily involved in the experiment. The subjects were requested to maintain balance for 20 seconds with eyes both open and closed on a force plate and then foot ground reaction data were collected for that duration. Results showed that mean velocity of COP in closed eyes condition was larger 1.84 times than that of the open-eyes condition and range of vertical angle was increased approximately one degree in the closed eyes condition. To accomplish a balance, the frequency power in mediolateral and anteroposterior components of the foot-ground reaction force was increased by 1.3~1.4 times. Consequently, visual absence during single leg stance can result in critical loss of balance and lead to instability of body control.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.693-702
• /
• 2009

A computational fluid analysis was performed on an LOx line system of a liquid rocket engine. The model was created with 3D CAD and imbedded to the 3D CFD program. Before the full scale analysis on the system was carried out, each components with simplified models was analyzed to save time and cost. As a result, the inlet pressure of the gas generator should be compensated with a certain device unless the inlet pressure of the line system is sufficiently high. The flow pattern of the exit of the system was dependant upon the location of the orifice as well as the size. As a whole the line system analyzed met the requirements, and will be tested and confirmed after being manufactured.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.34-34
• /
• 1999

토카막(Tokamak)에서는 플라즈마(plasma)로 불순불(impurity)의 유입을 방지하기 위해 고진공을 유지해야 하며 이를 위해 가열탈리(backing), 방전세정(discharge codanning) 등 wall conditioning이 기본적으로 요구된다. KT-1 토카막은 실험실 이전에 따른 해체로 인해 진공용기(vacuum vessel) 가 대기압 하에 수개월 동안 노출되어 있었기 때문에 재조립 후 가열 탈 리가 필수적이나 진공용기의 외부에 saddle loop coil을 비롯해 Rogowski, diamagnetic coil, poloidal field coil 등 많은 magnetic pick up coil 들이 설치되어 있어 열선 등 일반적인 방법으로 가열 탈 리가 어려운 상황이다. 따라서 KT-1 토카막에서는 전자석 코일에 상전원을 부가하였을 때 진공용기에 발생하는 유도가열 (inductive heatin)을 이용해 가열 탈리를 시도하였다. 유도 가열 탈리(inductive backing)는 토로이달 자장 코일(toroidal field coil)과 가열 저장 모일(ohmic heating coil)을 각각 이용하여 코일의 온도가 6$0^{\circ}C$ 이하가 유지되는 코일 전류 범위내에서 수행하였으며 먼저 이 둥 경우에 있어서 진공용기의 온도분포를 비교하엿다. 그리고 가열 탈리 기간 및 그 전, 후의 진공압력과 잔류기체 분압을 측정, 분석하였다. 유도가열에 의한 방법으로 KT-1 토카막에서 얻은 탈리온도는 12$0^{\circ}C$정도로 비교적 낮았으나 탈리 시간을 연장하여 탈리효과를 어느 정도 보상할 수 있으며 일반적인 가열 탈리가 여려운 경우 유도 가열 탈 리가 채택될 수 있는 또 하나의 방법이라 볼 수 있다.

• 한국기계연구소 소보
• /
• s.18
• /
• pp.75-85
• /
• 1988

The distributor for hydraulic pumps or motors, particularly radial piston motors, include rotary member which has equally both surface shape for dynamic balance and two fixed members, located in both side of rotary member, which have equal surface shape for dynamic balance and circular ring which use to retain predetermined clearance between two fixed members. Rotary member must have valve part for flow-distribution and can have hydrostatic bearing for excellently dynamic balance. At least two annular steps located on said pressure plate which use in compensation of bolt expansion.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.53-60
• /
• 2014

This paper proposes a control scheme to reduce the power consumption of a variable displacement swash-plate type piston pump supplying oil to a valve-controlled hydraulic cylinder at constant pressure. Whenever flow rate demand was absent, the swash plate angle and the pump speed were changed to the minimum values required to compensate for the internal leakage flow. In response to command signals, the pump speed was changed in proportion to the absolute mean value of the speed component for position commands. At the same time, a pressure regulator was activated to maintain constant system pressure by precisely adjusting the pump speed with the swash plate angle fixed at the maximum. The conventional system consisting of a pressure-compensated variable displacement type pump is driven at a constant speed of 1,800rpm. By comparison, computer simulation and experimental results showed that idling power at stand-by status could be reduced by up to 70% by reducing the pump speed from 1,800rpm to 300rpm and the swash plate angle to the minimum.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.177-181
• /
• 2019

Pressure sensors are used in various industries such as automobiles, airplanes, medical equipment, and coolers. Even if the ambient temperature changes, the measurement is reliable and stable. In this study a diaphragm-type pressure sensor was used to derive a temperature-compensated pressure estimation equation for accurate pressure measurement at $100^{\circ}C$ and $-40^{\circ}C$. To understand the characteristics of the pressure sensor diaphragm with respect to temperature and pressure, experiments were conducted in temperature-variable chamber using FEM analysis to confirm that the influence of temperature effect was nonlinear. Based on the experimental results, a nonlinear method for calculating the pressure by compensating for the error due to temperature was derived. The calculated pressure value is lower than 0.5 % at low and high temperatures, and lower than 0.4 % at $22^{\circ}C$, thereby eliminating the effect of temperature.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.2
• /
• pp.63-81
• /
• 2008

Hasteful behavior means choosing the best suited methods while behaving fast and quickly. We can't conclude whether hasteful behavior is totally bad or good. Striving for achievement of own certain purpose reflects achievement motivation or need for achievement. However, this striving also has potentiality of missing confirmation, therefore the potentiality may cause errors. The aim of this study is to investigate the psychological structure and characteristic of the hasteful behavior. One hundred ninety-one students conducted Hasteful Behavior Questionnaire, Achievement Motivation Measuring Scale, and NEO Personality Inventory. We analyzed data of 188 respondents, because of missing value. The result of factor analysis showed that hasteful behavior consisted of 5 factors- 「Uncomfortableness」, 「Time Pressure」, 「Isolation」, 「Boring Condition」, and 「Expecting Rewards」. According to correlations among the hasteful behavior factors and the relationship between hasteful behavior and achievement motivation, we found that hasteful behavior had two aspects, one was "Missing Confirmation(MC)" and the other was "Need for Achievement(NA)". We also found that 「Time Pressure」 was related to the both aspects. MC had a positive relation to Neuroticism, whereas MC correlated negatively with Conscientiousness. On the other hand, NA had a positive relationship with Extraversion and Achievement Striving.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.247-253
• /
• 2005

This study investigated the effects on foot and ankle roll-over characteristics according to different heel heights during walking. Fifteen female volunteers who have neither musculoskeletal nor foot problems were participated in gait analyses, wearing four different pairs of shoes in different heel heights. To obtain roll-over shape of foot/ankle complex, we used trajectories of knee and ankle joints as well as the renter of pressure between initial contact and opposite initial contact. Results revealed that the entire roll-over shape moved distally as the heel height increased but roll-over characteristics showed uniformly with different heel heights. In addition, we found that nondisablea persons automatically adapted to their foot/ankle complex to varying heel heights within 6cm, by moving the origin of roll-over shape distally to maintain roll-over characteristics. However, since the balance of the gait only by the ankle joint could not be achieved beyond the heel height of 6cm, compensations at the knee and the hip joints occurred simultaneously. Roll-over characteristics in human walking would provide simpler and wider understanding of human walking, and furthermore could be applied to the wide understanding of prosthetics and orthotics of the lower extremity as well as orthopaedic shoes.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.242-247
• /
• 1998

Hydrogenated amorphous carbon nitride[a-C:H(N)] films were deposited on p-type Si(100) at room temperature with bias voltage of 200 V by DC saddle-field plasma-enhanced chemical vapor deposition. Effects of the ratio of $N_2$ to $CH_4$($N_2/CH_4$), in the range of 0 and 4 on such properties as optical properties, microstucture, relative fraction of nitrogen and carbon, etc. of the films have been investigated. The thickness of the a-C:H(N) film was abruptly decreased with the addition of nitrogen, but at $N_2/CH_4$>0.5, the thickness of the film gradually decreased with the increase of the $N_2/CH_4$. The ratio of N to C(N/C) of the films was saturated at 0.25 with the increase of $N_2CH_4$. N-H, C≡N bonds of the films increased but C-H bond decreased with the increase of $N_2CH_4$.Optical band gap energy of the film decreased from 2.53 eV at the ratio of $N_2CH_4$=4.