DOI QR코드

DOI QR Code

Reduction of Power Consumption for Constant Pressure Control of Variable Swash Plate-type Piston Pump by Varying the Pump Speed

가변 용적형 사판식 피스톤 펌프의 회전 속도 조절에 의한 정압 제어 소비 동력 절감

  • Kim, J.H. (Aerospace & Mechanical Engineering, Graduate School, Korea Aerospace University) ;
  • Hong, Y.S. (Aerospace & Mechanical Engineering, Korea Aerospace University)
  • Received : 2014.08.29
  • Accepted : 2014.11.05
  • Published : 2014.12.01

Abstract

This paper proposes a control scheme to reduce the power consumption of a variable displacement swash-plate type piston pump supplying oil to a valve-controlled hydraulic cylinder at constant pressure. Whenever flow rate demand was absent, the swash plate angle and the pump speed were changed to the minimum values required to compensate for the internal leakage flow. In response to command signals, the pump speed was changed in proportion to the absolute mean value of the speed component for position commands. At the same time, a pressure regulator was activated to maintain constant system pressure by precisely adjusting the pump speed with the swash plate angle fixed at the maximum. The conventional system consisting of a pressure-compensated variable displacement type pump is driven at a constant speed of 1,800rpm. By comparison, computer simulation and experimental results showed that idling power at stand-by status could be reduced by up to 70% by reducing the pump speed from 1,800rpm to 300rpm and the swash plate angle to the minimum.

Keywords

References

  1. H. E. Merritt, Hydraulic Control Systems, John Wiley & Sons, pp.224-228, 1967.
  2. D. N. C. Nam, J. I. Yoon and K. K. Ahn, "Position Control of Electro Hydrostatic Actuator(EHA) using a Modified Back Stepping Controller", J. of the Korean Society for Fluid Power and Construction Equipments, Vol.9, No.3, pp.16-22, 2012. https://doi.org/10.7839/ksfc.2012.9.3.016
  3. S. H. Park, "Characteristics of an Electro Hydrostatic Actuator and Application Fields", J. of the Korean Society for Fluid Power and Construction Equipments, Vol.6, No.1, pp.2-10, 2009.
  4. D. H. Kim, Y. S. Hong and D. M. Kim, "Performance Analysis of an Electro Hydrostatic Actuator", J. of the Korean Society for Aeronautical and Space Sciences, Vol.35, No.4, pp.316-322, 2007. https://doi.org/10.5139/JKSAS.2007.35.4.316
  5. S. Habibi and A. Goldenberg, "Design of a New High Performance Electro-Hydraulic Actuator", IEEE/ASME Transactions on Mechatronics, Vol.5, No.2, pp.227-232, 2000.
  6. J. Willkomm, M. Wahler and J. Weber, "Model Predictive Control of Speed-variable Variable-displacement Pumps to Optimize Energy Efficiency", 9th International Fluid Power Conference, Aachen, Vol.1, pp.372-385, 2014.
  7. Y. C. Kwon and Y. S. Hong, "Hybrid Control of the Swash Plate-type Variable Displacement Hydraulic Piston Pump for an EHA", J. of the Korean Society for Aeronautical and Space Sciences, Vol.41, No.4, pp.291-298, 2013. https://doi.org/10.5139/JKSAS.2013.41.4.291
  8. P. Kaliafetis and TH. Costopoulos, "Modelling and Simulation of an Axial Piston Variable Displacement Pump with Pressure Control", Mech. Mach. Theory, Vol.30, No.4, pp.599-612, 1995. https://doi.org/10.1016/0094-114X(94)00057-R
  9. W. Kemmetmueller, F. Fuchshumer and A. Kugi, "Nonlinear Pressure Control of Self-supplied Variable Displacement Axial Piston Pumps", Control Engineering Practice, Vol.18, pp.84-93, 2010. https://doi.org/10.1016/j.conengprac.2009.09.006
  10. J. Grabbel and M. Ivantysynova, "An Investigation of Swash Plate Control Concepts for Displacement Controlled Actuators", Int. Journal of Fluid Power, Vol.6, No.2, pp.19-36, 2005.