• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.13-18
• /
• 2002

증기 발생기 전열관의 파열 사고는 지난 20년 동안 2년마다 1개씩의 비율로 발생되어왔고 최근 몇 년간은 매년 발생되고 있는 추세이다(3). 전열관의 파열 사고는 응력부식균열, 피로 그리고 마멸 등의 원인에 의해서 발생되고 있는 것으로 알려져 있다. 초기 발전소에서 균열의 발생 및 성장은 축 방향 균열에 국한하여 관심을 가졌었으나 최근 원주 방향 균열에 의한 사고가 발생되면서 원주 방향 균열에 대해 관심을 가지게 되었다.(중략)

• Tribology and Lubricants
• /
• v.12 no.2
• /
• pp.41-47
• /
• 1996

고속에서 작동하는 공기동압 스핀들을 개발하기 위해 축방향 하중을 포함하여 설계와 관련된 문제들을 살펴보았다. 협곡이론에 근거한 지배방정식을 사용하였고, 차분법을 사용하여 해석하였다. 설계인자인 홈의 형상, 홈의 각도, 회전수, 그리고 편심량 등을 사용하여 축방향과 원주방향의 압력분포를 수치해석적으로 구하였다.

• IE interfaces
• /
• v.9 no.3
• /
• pp.34-43
• /
• 1996

폭발적인 기술의 변천을 거듭한 무선통신을 차세대의 개인 휴대통신 서비스(PCS)로 발전시키기 위한 두 가지 무선 접속 기술방식을 비교하고 기술개발 동향 및 정책 방향을 제시하였다. 분산된 국내 이동통신의 기술력을 바탕으로 대외 경쟁력을 증진시키기 위한 표준화의 필요성과 동향을 살펴보고 다가오는 세계시장 개방의 압력에 국내의 학, 연, 산, 정부가 공동으로 대처하기 위하여 바람직한 표준화 단계와 표준화 방향에 대하여 서술하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.75-79
• /
• 1996

유량 보존 경계 조건을 적용하여 커넥팅 로드 베어링의 성능 해석을 수행하였다. 레이놀즈 경계 조건을 적용하는 경우에 비하여 최소 유막 두께, 동력 손실율과 축방향 유량은 더 작게, 최대 유막 압력은 더 크게 예측되었다. 유량 보존 경계 조건을 적용한 경우 축 방향으로의 공급 유량과 방출 유량이 거의 균형을 이루었다. 물리적으로 타당한 유량 보존 경계 조건을 적용한 커넥팅 로드 베어링의 성능 해석으로 얻어진 동력 손실율과 축 방향 유량을 이용하면, 윤활제의 온도 상승과 그에 따른 점도 변화를 좀 더 정확하게 예측 할 수 있을 것으로 기대된다.

• The Journal of Engineering Geology
• /
• v.29 no.3
• /
• pp.201-209
• /
• 2019

Bottom-up multi-stage pressure grouting is widely applied to domestic slopes and tunnels. It involves injecting earth from the ground to the surface after drilling. Various reports of construction performance have demonstrated its wide applicability. However, little research has studied top-down multi-step pressure grouting in Korea, which involves injection from the surface. This paper compares the grouting effect of both the established bottom-up method and the top-down method in soil box and field tests. The soil box test showed that the bulb volume of the top-down method is ~24% less than that of the bottom-up method. The field test confirmed that the top-down method has a wider grouting range and a higher injection density per area than the bottom-up method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.12
• /
• pp.18-24
• /
• 2006

Passive control of the shock wave/turbulent boundary-layer interaction utilizing slotted plates and a porous plate over a cavity has been carried out. Effect of various slot configurations on the characteristics of the interaction has been observed. Pitot/wall surface pressure distributions and flow visualizations including Schlieren images, kerosene-lampblack tracings and interference fringe patterns over a thin oil-film have been obtained at the downstream of the shock interactions. For the streamwise-slot configuration, a local higher pitot pressure was noticed at the downstream of the interaction as compared with the case of no control, however, not much improvement in pitot pressure was observed for the spanwise-slot configuration.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.308-312
• /
• 2001

This study was carried out to develop a basic form of planning hull type fishing boat. G/T 10ton class is selected as object hull form, and hull form is designed in Chosun University. A series of test results of LCG variations for S different LCG points are presented in this paper. The test was performed in Davidson Laboratory, and the scope of tests include resistance, trim and sinkage.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.32-41
• /
• 2012

Most diagnosis methods for servo valves requires installing spool displacement sensor or flow sensor as well as pressure sensor. The measurement of flow is hard to implement and many kinds of servovalves or proportional direction valves do not have a built-in spool displacement sensor. In this study, static performances of servovalve or proportional-direction-valve are studied theoretically and a diagnosis technique, which uses only load pressure and input current signal, is assessed. An experimental setup was made based upon a personal computer and the LabVIEW graphical language. A series of diagnosis tests were performed and the analysis results showed it possible to measure the pressure gain, hysteresis and null bias in a relatively simple methodology.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.41-49
• /
• 1997

Computational results from Navier-Stokes equations are presented for the Stokes-wave/flat-plate boundary-layer and wake for small wave steepness(Ak=0.01), including exact and approximate treatments of the viscous free-surface boundary conditions. The macro-scale flow indicate that the variations of the external-flow pressure gradients cause acceleration or deceleration of the streamwise velocity component and alternating direction of the cross flow. Remarkably, the wake displays a greater response, i.e., a bias with regard to favorable as compared to adverse pressure gradients. The micro-scale flow indicates that the free-surface boundary conditions have a profound influence over the boundary layer and near/intermediate wake. Order-of-magnitude estimates are conformed to the computational results. And appreciable errors are introduced through approximations to the free-surface boundary conditions.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.127-132
• /
• 2023

In this study, designing of a Type 4 pressure vessel using the filament winding method was conducted. In order to prevent leakage in consideration of the design of the hydrogen storage tank, a liner was designed by applying high-density polyethylene (HDPE), and the composite structure was designed by stacking carbon/epoxy in the hoop and helical directions. As a theoretical approach, the angle of the helical fiber and fiber thickness of each hoop and helix were designed. The safety of the design was verified using the commercial software ANSYS.