• Analytical Science and Technology
• /
• v.21 no.5
• /
• pp.392-396
• /
• 2008

Acer tegmentosum is a tree used to treat various liver diseases in Korea. There have been some concern regarding the safety of Acer tegmentosum due to some toxic chemical compounds in its stems. Supercritical fluid extraction (SFE) was employed to develop a removing method of toxic compounds from Acer tegmentosum. The toxic compounds were effectively extracted with ethanol modified supercritical fluid $CO_2$. The optimum condition of SFE was 100 bar of pressure, $40^{\circ}C$ of extraction temperature, 3 mL/min of $CO_2$ flow rate, 0.2 mL/min of modifier (ethanol) flow rate.

• CORROSION AND PROTECTION
• /
• v.12 no.1
• /
• pp.24-29
• /
• 2013

원자력 발전소의 설계 수명이 늘어나고 기존의 가동 원전 또한 장기 운전을 목표로함에 따라, 원자로 압력용기, 가압기, 증기발생기, 배관 등의 주요 구조재료의 장기 열화에 따른 재료 건전성을 유지하는 것이 매우 중요하다. 특히, 응력부식균열 현상은 장기 열화에 의해 일어날수 있는 구조재료에서의 심각한 취화 문제들중의 하나로써, 이 현상을 예방하거나 지연시키기 위해서는 현상의 근본원인과 작동기구를 규명하는 것은 원전의 안전성 유지를 위해 매우 중요하다. 이를 위해서 구조재료 표면의 원전 운전 조건에서의 산화막 특성과 그 형성 거동을 분석하는 것은 매우 중요하게 되는데, 원전 운전 조건은 고온고압의 수화학 환경으로 일반 환경에서 사용가능한 다양한 분석 방법들을 적용하기에 많은 제약을 받게 된다. 그러나, 라만 분광법은 가동 원전의 운전 조건인 고온/고압수 환경 하에서도 실시간으로 산화막 분석이 가능한 기법으로, 본 논문에서는 지금까지의 라만 분광법을 이용하여 고온고압수 환경에서의 주요 구조용 금속 및 합금 표면에 생성된 산화막에 대한 분석 연구 결과에 대하여 소개하고, 앞으로 이를 이용한 구조재료의 열화 현상을 분석 및 열화기구 규명을 위한 연구개발 방향을 제시하고자 한다.

• Economic and Environmental Geology
• /
• v.44 no.2
• /
• pp.123-133
• /
• 2011

The lab scale experiments to investigate the geochemical reaction among supercritical $CO_2$-mineral-brine which occurs at $CO_2$ sequestration sites were performed. High pressurized cell system (l00 bar and $50^{\circ}C$) was designed to create supercritical $CO_2$ in the cell, simulating the sub-surface $CO_2$ storage site. From the high pressurized cell experiment, the surface changes of Ca-feldspar, amphibole (tremolite) and olivine, resulted from the supercritical $CO_2$-mineral-brine reaction, were observed and the dissolution of minerals into the brine was also investigated. The mineral slabs were polished and three locations on the surface were randomly selected for the image analysis of SPM and the surface roughness value (SRV) of those locations were calculated to quantify the change of mineral surface for 30 days. At a certain time interval, SPM images and SRVs of the same mineral surface were acquired. The secondary minerals precipitated on the mineral surfaces were also analyzed on SEM/EDS after the experiment. From the experiments, the average SRV of Ca-feldspar increased from 2.77 nm to 20.87 nm for 30 days, suggesting that the dissolution of Ca-feldspar occurs in active when the feldspars contact with supercritical $CO_2$ and brine. For the amphibole, the average SRV increased from 2.54 nm to 8.31 nm and for the olivine from 0.77 nm to 11.03 run. For the Ca-feldspar, $Ca^{2+}$, $Na^+$, $Fe^{2+}$, $Si^{4+}$, $K^+$ and $Mg^{2+}$ were dissolved in the highest order and $Si^{4+}$, $Ca^{2+}$, $Fe^{2+}$ and $Mg^{2+}$ for the amphibole. Fe (or Mg) - oxides were precipitated as the secondary minerals on the surfaces of amphibole and olivine after 30 days reaction. Results suggested that $Ca^{2+}$, $Fe^{2+}$ and $Mg^{2+}$ rich minerals would be significantly weathered when it contacts with the supercritical $CO_2$ and brine at $CO_2$ sequestration sites.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.99-110
• /
• 2018

In this study, oil of Platycodon grandiflorum seeds was prepared using supercritical carbon dioxide extraction (SCE) and its physicochemical indices as a new edible oil were investigated. Compared to Soxhlet solvent extraction, SCE under the condition of 6,000 psi at $40^{\circ}C$ produced more oil, especially from the roasted seeds to 32.7%. TLC analysis showed triacylglycerols accounted for most of the oil obtained from roasted Platycodon grandiflorum seeds by SCE similarly to commercial soybean oil or perilla seeds oil. The oil had highly unsaturated lipid with considerable amount of linoleic acid(73.27%) much more than two commercial oils followed by oleic acid(13.16%). Physicochemical properties of the oil were as follows; specific gravity, 0.92; dynamic viscosity, 45.37 cP; refractive index, 1.48; color, L=47.30, a=-3.69, b=25.72; iodine value, 141.57 g $I_2/100g$ oil; saponification value, 191.21 mg of KOH/g of oil; acid value, 2.60 mg of KOH/g of oil. Among those, refractive index, viscosity and iodine value, which were related to unsaturation degree of lipid, were ranged between those of two commercial oils. The oxidation stability of oil(2.03 hr) was also ranged between less stable perilla seeds oil(1.79 hr) and more stable soybean oil(2.94 hr) based on the induction time measured by Rancimat assay. In addition to extraction yield increase, seeds roasting provided further benefits such as reductions of cholesterol ester content and acid value without change in fatty acid composition. In conclusion, oil was extracted from the roasted Platycodon grandiflorum seeds at high yield by supercritical carbon dioxide and it seemed to have proper characteristics as a edible oil.

• Clean Technology
• /
• v.9 no.4
• /
• pp.197-206
• /
• 2003

We performed removal of aromatic compounds, benzene and toluene, from soil and zeolite using supercritical carbon dioxide. Extraction was performed at $50^{\circ}C$ and 27.7 MPa with changing the extent of pollutant concentration and the results were compared and analyzed. Experiments were carried out using flow method and high pressure extractor of 1.27 cm in diameter and 25cm in length was used. The pollutants were sampled every ten minutes and their concentrations were analyzed with GC/FID. As a result, highly contaminated sample followed solubility/elution model and slightly contaminated sample followed desorption/kinetics model. At the same condition benzene was extracted faster than toluene. In the case of zeolite, more time is required to extract pollutants than soil. This phenomena was due to high adsorption capacity of zeolite. In the case of highly contaminated soil, we could correlate experimental data using simple Brady's fixed bed extractor model. But in the case of slightly contaminated soil, that was governed with desorption/kinetics model, there was some errors.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.44-50
• /
• 2006

To characterize thermo-chemical feature of su gar conversion of woody biomass poplar wood (Populus alba${\times}$glandulosa ) by sub- and supercritical water was treated for 60s under subcritical (23 MPa, 325 and $350^{\circ}C$) and supercritical (23 MPa, 380, 400, and $425^{\circ}C$) conditions, respectively. Among degradation products undegraded poplar wood solids existed in aqueous products. As the treatment temperature increased, the degradation of poplar wood was enhanced and reached up to 83.1% at $425^{\circ}C$. The monomeric sugars derived from fibers of poplar wood by sub- and supercritical treatment were analyzed by high performance anionic exchange chromatography (HPAEC). Under the subcritical temperature ranges, xylan, main hemicellulose component in poplar wood, was preferentially degraded to xylose, while cellulose degradation started at the transition zone between sub and supercritical conditions and was remarkably accelerated at the supercritical condition. The highest yield of monomeric sugars amounts to ca. 7.3% based on air dried wood weight (MC 10%) at $425^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.731-743
• /
• 2018

In bio-jet fuel production, selecting operating conditions of hydro-upgrading is of great importance to make iso-Paraffin rich hydrocarbons with carbon distribution including jet fuel range. Herein, iso-Paraffin rich biofuel including jet fuel range hydrocarbons ($C_8-C_{16}$) is produced from simultaneous cracking and isomerization using n-Paraffin rich hydrocarbon derived from hydrotreated vegetable oil over 0.5 wt..% Pt/Zeolite catalyst. We report and analyze the yields and compositions in the produced hydrocarbons affected by various operating conditions, such as reaction temperature, reaction pressure, molar ratio of reactants, and weight hourly space velocity. Aforementioned operating conditions not only can help interpret the reaction dynamics of hydro-upgrading, but also further produce bio jet-fuel after distillation.

• Journal of Korea Foresty Energy
• /
• v.24 no.1
• /
• pp.39-46
• /
• 2005

In this study, the possibility of sugar conversion of poplar wood(Populus $alba{\times}rglandulosa$) and their degradation features of major wood components were characterized using flow type supercritical water treatment system. The finely ground poplar wood meals were treated for 2min. under subcritical condition$(23MPa,\;275^{\circ}C\;and\;325^{\circ}C)$ and supercritical condition $(23MPa,\;375^{\circ}C\;and\;415^{\circ}C)$. respectively. The degradation products of poplar wood meals appeared brownish colors, including undegraded solids. Increasing the temperature of the system, the degradation rate of poplar wood meals was accelerated and reached up to $94\%\;at\;375^{\circ}C$. The total amount of reducing sugars in degradation products determined by DNS method were gradually lowered when the temperature condition became severe. This indicated that the reducing sugars formed were further degraded to kan derivatives by certain side reaction such as pyrolysis under higher temperature. In order to characterize degradation features of lignin, the degradation products were extracted with ethylacetate and the organic phases were subjected to GC-MS analysis. Main lignin degradation products were identified to vanillin, guaiacol, syrinaldehyde, 4-prophenyl syringol and dihydrosinapyl alcohol, which could be formed by the cleavage of ether linkages in lignin polymers by high temperature condition.

• Composites Research
• /
• v.29 no.4
• /
• pp.216-222
• /
• 2016

Ring-opening metathesis polymerization of p-dicyclopentadiene (DCPD) can be performed using the tungsten type catalyst. This reaction usually progresses in nitrogen condition, because the catalysts are extremely sensitive in air condition. To solve this problem, DCPD resin with tungsten (W) was cured using hot press after stirring of DCPD A and B liquid in air condition. Mechanical properties of DCPD were improved by reducing microvoid occurrence successfully by using hot press method. It might be because hot press could provide sufficient press on DCPD specimen. Addition of catalyst was not effective for the curing of resin in a short time. During polymerization, pressure and temperature had a great influence on the mechanical properties of DCPD.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1268-1274
• /
• 1999

Pine twigs with buds were cut into $2{\sim}3\;mm$ long pieces and about 18g was used for each experiment. Pressure and temperature ranges employed were $100{\sim}300\;bar$ and $35{\sim}55^{\circ}C$, respectively. Volatile compounds of extracts were isolated and identified by gas chromatography and mass selective detector. Twenty three compounds from the extracts were identified. Limonene and ${\beta}-pinene$ were found to be the major components with $32.6{\sim}43.4%$ being limonene. Extracts obtained by supercritical fluid extraction were lower in monoterpene and higher in oxygenated terpenoids than those by steam distillation and solvent extraction (SDE). Sensory evaluation showed that the pine flavor extracted using supercritical carbon dioxide was much better in quality than that of SDE. In conclusion, it was found out that supercritical fluid extraction can successfully be applied to extract high quality flavor from pine.