• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.481-491
• /
• 2009

In this paper, we proposed a hybrid P2P overlay structure for live media streaming. The proposed structure consists of the mesh overlay organized by peers according to the geographical proximity and similar bandwidth range and the tree overlay formed by the peers for which the stability of participation is approved. The proposed scheme enhances the robustness of tree overlay and the long delay of mesh overlay by intelligently combining the utilization of the tree overlay and the mesh overlay. Furthermore, the peers with a large up-link bandwidth are located near to the media source peer. Therefore, it reduces the height of tree, and as a result, the stream transmission delay. Through simulation, we evaluated the performance of the proposed scheme in terms of scalability and quality of services.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.559-569
• /
• 2001

With the growth of the Internet, applications using the reliable multicast protocol are increasing. Two important requirements of reliable multicasting are reliability and scalability. To enhance scalability, many methods have been proposed. A typical method is a local recovery scheme. This paper proposes a new stable and effective protocol with the following features. The first is to apply the discipline of the separations of concerns to NAK message. By dividing the functions of the NAK message into the error recovery request and the NAK-suppression, each function can be optimized. Second, a local representative, which is selected gradually and distributively, executes error recovery in somewhat deterministic manner. Finally, by dynamically adjusting the TTL value of the control message, the error recovery domain can be optimized. The proposed scheme has been implemented and experimented on Network Simulator. Compared to the existing schemes, the performance results show that scalability has not only been enhanced but also error recovery time and network overhead have been reduced.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.709-716
• /
• 2007

An active steering bogie has been theoretically proved to improve both stability and steering performance remarkably. However, It has not been commercialized yet even though many researchers have been trying to develop it because some technical difficulties still exist such as information acquisition fer active control, increasing mechanical components, high energy consumption, fail-safe problem and so on. To solve those problems, an advanced active steering mechanism is proposed in this paper. With this mechanism, required control force is small enough to use direct drives. Therefore, the number of additional mechanical components can be minimized since mechanical transducers like gears are not necessary. Fail-safe function can be also inserted easily. In this paper, concept design of the proposed active steering bogie is introduced and the possibility is verified through computer simulation using linear dynamic model.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.5
• /
• pp.44-51
• /
• 2009

In this paper, an air conditioner peak power control system using electric power line communication has been developed. The air conditioner power control system using RS-485 communication method is hard to install on the existing buildings due to difficulty in cabling, and the system using wireless communication methods has a weak point of not being able to be used in close space, while the developed system has its own advantages of overcoming the above mentioned obstacles. In addition, the system is extended to support not only single-phase electricity system but also three-phase four-wire electricity system, and therefore can be installed anywhere in the domestic environment. The system also has enhanced the ease of deployment, operational stability and economical efficiency by compact circuit design. Considering the current state requiring the energy sayings, the system would greatly contribute to the widespread use of the air conditioner power control system. The superiority in the performance and stability of the system has been proved by the design verification of each component such as remote air conditioner controller, electric power line gateway and so on, and the field test of the whole system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.109-116
• /
• 2019

This study proposed a robust detection algorithm. It detects face more stably with respect to changes in light and rotation for the identification of a face shape. Also it satisfies both efficiency of calculation and the function of detection. The algorithm proposed segmented the face area through pre-processing using a face shape as input information in an environment with a single camera and then identified the shape using a Self Organized Feature Map(SOFM). However, as it is not easy to exactly recognize a face area which is sensitive to light, it has a large degree of freedom, and there is a large error bound, to enhance the identification rate, rotation information on the face shape was made into a database and then a principal component analysis was conducted. Also, as there were fewer calculations due to the fewer dimensions, the time for real-time identification could be decreased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12B
• /
• pp.758-766
• /
• 2007

IStreaming services with a client-server architecture have scalability problem because a server cannot accomodate clients more than its processing capability. This paper introduces a case study for implementing H.264 streaming system based on P2P architecture in order to provide scalable and stable broadcast streaming services over the internet. The prototype system called OmniCast264 consists of the H.264 encoding server, the streaming server, the proxy server, and peer nodes. The proxy server dynamically manages placement of the peer nodes on the P2P network. Omnicast264 has the concepts of distributed streaming loads, real-time playback, error-robustness and modularity. Thus, it can provide large-scale broadcast streaming services. Finally, we have built P2P streaming systems with 12 PCs connected serially or in parallel. The experiment shows that OmniCast264 can provide real-time playback.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.29-37
• /
• 2004

This paper provides a reliable H$_{\infty}$ state feedback controller design method for delayed singular systems with actuator failures occurred within the prescribed subset. The sufficient condition for the existence of a reliable H$_{\infty}$ controller and the controller design method are presented by linear matrix inequality(LMI), singular value decomposition, Schur complements, and changes of variables. The proposed controller guarantees not only asymptotic stability but also H$_{\infty}$ norm bound in spite of existence of actuator failures. Since the obtained sufficient condition can be expressed as an LMI fen all variables can be calculated simultaneously. Moreover, the controller design method can be extended to the problem of robust reliable H$_{\infty}$ controller design method for singular systems with parameter uncertainties, time-varying delay, and actuator failures. A numerical example is given to illustrate the validity of the result.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.649-657
• /
• 2009

Usually, The data transmission processing efficiency of the distributed system running on high speed networks depends on the system architecture and the data transmission processing system. In order to secure the real-time rate and the system reliability, the real-time distributed simulation system on the distributed environment has tried to satisfy the performance required by the data transmission processing system. However, the client/server-based data transmission processing system in the real-time simulation system has been difficult to satisfy the system stability, extensibility and maintenability, especially when system changes. So, it is natural to study another improved data transmission processing system to solve the problems at the existing real-time simulation system. After analyzing the existing real-time simulation system, this paper will propose the improved real-time data transmission system by using Software Design Pattern, which enhances extensibility, interoperability, reusability and maintenability of the system.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.7
• /
• pp.117-128
• /
• 2012

Recently IT infrastructure plays a central role in the base of the society. However, use of personal registration number on internet sites has become a major factor increasing danger of leaking of personal information. Currently, the government is recommending various information protection services in order to prevent the collection of personal registration numbers and leaking of personal information on the internet. Among them, i-PIN service is the one recommended for minimal use of personal registration numbers on the internet. Although i-PIN can be used as a way to substitute personal registration numbers on the internet, there are certain limitations in using i-PIN as the only key to recognize individuals. This study proposes organization of web system in which self certification can be conducted using i-PIN as a tool for personal certification. Also its usability and stability have been verified through performance test when i-PIN service is linked with web service and used as personal certificate. But i-PIN service is unavailable if obstacles occur in providers of i-PIN self certification. To settle this inconvenience, the study also proposes how to cope with such obstacles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.49-49
• /
• 1999

리튬 이차 전지를 박막화함으로써 개발된 고상의 마이크로 박막전지는 임의의 크기 및 형태로의 제작이 가능하며 액체전해질을 사용하지 않기 때문에 작동 중 열 또는 기체 생성물이 생기지 않아 높은 안정성을 갖으며 광범위한 사용 온도 범위를 가진다. 위와 같은 장점으로 인하여 충전 가능한 고상의 박막형 리튬 이차 전지는 점진적으로 그 사용 범위가 크게 확대될 것으로 판단된다. 즉, 초소형 전자, 전기 소자는 물론이며 조만간 실현될 스마트 카드, 셀루러폰 및 PCS와 같은 개인용 휴대 통신장비의 전력 공급계로의 응용이 가능할 것이다. 특히 장수명, 고에너지 밀도를 갖는 초소형의 전지를 필요로 하는 microelectronics, MEMS등에 이용될 수 있는 이차전지에 대한 요구가 점점 가시화 됨에 따라 박막공정을 이용한 이차전지개발기술이 요구되고 있으며, 박막제조기술을 이용한 고상의 박막형 및 전지에 관한 연구가 증가하고 있다. 본 연구에서는 박막형 리튬 이차전지의 Cathode 물질로써 비정질의 산화바나듐 박막을 반응성 스퍼터링에 의하여 상온에서 증착하였다. 박막형 이차전지의 여러 가지 Cathode 물질중 산화바나듐은 다른 물질들과는 달리 비정질 형태로 매우 우수한 충방전 특성을 나타낸다. 이런 특성으로 인해 다소 전지자체의 성능은 낮지만 저전력 저전압을 필요로 하는 초소형 전자 소자와 혼성되어 이용할 수 있는 잠재성이 매우 높은 물질이다. 바나듐 타겟의 경우 타겟 표면의 ageing에 따라 증착되는 박막의 특성이 매우 달라지게 되므로 presputtering의 시간을 변화시키면서 실험하였다. 또한 스퍼터링 중의 산소의 분압도 타겟의 ageing에 많은 영향을 주므로 실험 변수로 산소분압을 변화시키면서 실험하였다. 증착된 산화바나듐 박막의 표면은 scanning electron microscopy로 분석하였으며 구조 분석은 X-선 회절분석, X-ray photoelectron spectroscopy 그리고Auger electron spectroscope로 하였다. 증착된 산화바나듐 박막의 전기화학적 특성을 분석하기 위하여 리튬 메탈을 anode로 하고 EC:DMC=1:1, 1M LiPF6 액체 전해질을 사용한 Half-Cell를 구성하여 200회 이상의 정전류 충 방전 시험을 행하였다. Half-Cell test 결과 박막의 결정성과 표면상태에 따라 매우 다른 전지 특성을 나타내었다.