• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.587-594
• /
• 2017

The construction industry generates the greatest number of disasters. Laborer injury at construction sites is mostly reported by small and mid-sized construction sites. Moreover, of the injuries, the greatest number is related to formwork. The objective of this study is to propose a checklist of the risk factors of formwork, in which industrial injuries occur most frequently in small and mid-sized construction sites, with which safety management can be done thoroughly. Risk factors and preventive measures are derived by analyzing 9,396 industrial disasters occurring at construction sites in Korea. The checklist drawn in this study was reviewed by five specialists in safety management, and applied to construction sites to verify its applicability. In a result, applying the checklist to the site showed that the safety management system of small and medium-sized construction sites were insufficient. It is expected to contribute to the effective safety management of small and mid-sized construction sites.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.233-239
• /
• 2015

Recently, Due to variable marine accident occurred, problems relating to marine accidents have been raised. Of these accidents, designated anchorage of Korea coastal port, spcially open-sea anchorage, occurred dragging anchor and accidents are likely, due to failure to obtain a valid ship's holding power so that it is the situation unsatisfactory that ensuring the safety of the anchored ship and anchorage systematic safety management stadars for the efficent operation of the anchorage. also in case of open-sea anchorage vulnerable to external force of certain conditions due to geographical location and topographical characteristics of the port, accidents are likely dragging anchor by typoon or suddenly strong wind and secondary accidents are concerned. This paper shows standard of limit external force to ensure the safety anchorage each of ship's size through review marine accidents on Pohang port, also it is determined to be used as a basic reference for anchoring safety and efficient anchorage management.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.153-159
• /
• 2016

Gwangyang traffic safety designated area is composed of 3 fairways (Deep water fairway, inbound fairway, and outbound fairway). However, inbound vessels can't use this passage because of Samyeo rock and artificial fishing banks in inbound route. The problem with the rocks and artificial fishing banks has been raised by ship navigators and authorities of the port. This research is about the safety evaluation and management plan of the passage, and we conducted maritime traffic simulation using a model based on a ship operator risks. As a result, assuming that future marine traffic volume is the same as the present, and if the ship operators use 3 fairways and not two, it showed risk reduction of 46.4 % (vessels over 50,000 DWT using DW route) and 57.1 % (vessels over 10,000 DWT using DW route). Also, in a traffic volume condition which is the same as the present, to induce vessels over 50,000 DWT to use DW route is effective in mitigating of risks. Meanwhile, in a condition which increased the traffic volume by 150 %, it is more effective to induce vessels to use DW route. This research is the result of analysis using the model based on ship operator risks, and not cost-effectiveness analysis on the removal of Samyeo rock and artifical fishing banks. This research is expected to be used on setting up the sea route and management plan (particularly, restriction on passing DW route).

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.614-619
• /
• 2009

This study aims at diagnosing the relationship among user's security need Sufficiency, customer satisfaction and life satisfaction in electronic security system. For the achievement of this study selected electronic security system users in Seoul as a population for about 25 days from June 20th, 2008 to July 15th, 2008, segmented Han river based in 5 areas and extracted 1 dong per each area. This study selected 378 peoples by distributing 400 unities in total for each 80 peoples throughout purposive sampling method. The final 302 samples were used in statistics. Collected data was analyzed based on the aim of this study using SPSSWIN 16.0, and factor analysis, reliability analysis, stepwise multiple regression analysis and path analysis were used as statistic techniques to analyze. The conclusions are the followings; First, The higher bodily, environmental, mental, informational, and physical security need the more body and property protection satisfaction and facility customer satisfaction. The higher bodily, environmental, and mental security need the more employee service satisfaction. Second, The higher bodily, environmental, informational, and physical security need are perceived, the more influence is marked with life satisfaction and security life satisfaction. Third, The higher personal and property protection, facility, and employee service satisfaction the more security life satisfaction. Also, the higher customer service and personal and property protection satisfaction are perceived, the more influence is marked with life satisfaction. Fourth, Security need sufficiency has little influence on life satisfaction directly, but it has high influences on life satisfaction through customer satisfaction of electronic security system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.115-126
• /
• 2020

This study focused on the development of a simulation-based educational program for communication, targeted to prevent safety accidents of patients. Application of the program to nurses working in public medical institutions was assessed to identify the effects of the program in terms of communication skill, self-efficacy, critical thinking disposition, and problem solving ability of nurses, before and after completion of the education. Method: A total of 32 nurses, working in hospitals designated as public medical institutions, were selected as subject participants in the present study. Data were collected during the period August 19 to 20, 2019, and analyzed by SPSS 23.0. Results: Results obtained from the present study reveals significant efficacy of the educational program, in respect of improved communication skill, self-efficacy, and problem-solving ability. On completion of the educational program, we observed an increase in the critical thinking disposition of nurses, although it was statistically insignificant. Conclusions: We believe that the educational program developed in the present study can be exploited as a foundation for developing other programs intending to improve the communication skill of nurses employed in clinics of public medical institutions, targeted to prevent occurrence of safety accidents of patients.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.117-129
• /
• 2012

Road safety audit is the preventive enhancement strategy for safety. : it gets rid of beforehand the potential factor of a traffic accident in the stage of road planning and design and it evaluates the appropriation for road geometric structure or safety facility to prevent traffic accident in the stage of operation after the construction. Since this strategy is introduced to our country in the early 2000s, various projects have been processed and it was legislated recently. And now, the evaluation of past project for its continuation is needed. Therefore, in this study the evaluation of road safety audit on existing freeway is performed. The spatial extent of this study is Yong-dong line on which the safety treatment was executed in 2005 and 2006. And, the temporal range of this study is each 2-year of before and after from 2005 and 2006. The empirical bayes method of observational evaluation studies is applied to analyze. As a result, there is an effect of improvement on most of treated sections. But there is ineffective or negligible on some sections. Compared with the detail of treatment on each section, the effect of multiple or various treatments is good for that section. On the other hand, the section on which effect doesn't appear is the result of single or unimportant treatments. Throughout these results, the concrete analysis can be performed and the countermeasures designed for the section on which effect doesn't appear. Also it is used as reference to the future plan and direction of road safety audit on existing freeway.

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.195-204
• /
• 2011

During mechanical demolition of RC structures, weights of dismantling equipment and demolition waste of building are applied to unexpected load which did not be considered during the design of structural member. Nevertheless, the loading of dismantling equipment and dismantling process are mainly dependent on field managers' field workers' or experiences without considering safety of structural member by a structural engineer. It is urgently required that reflecting actual circumstance of mechanical demolition, safety evaluation method to evaluate the safety and the guideline for appropriate capacity of structural member to support dismantling equipment weight, be provided. Through site investigation and questionnaire on field workers, this paper proposed demolition waste load, load factor, strength reduction factor, and so on. These are essential to safe evaluation of a building, ready to demolition. Considering actual circumstance of mechanical demolition, safety evaluation method of building and design method of slab and beam was suggested to a dilapidated building. An capability to loading of dismantling equipment was proposed, applied to RC slab and RC beam. Therefore, the suggested safety evaluation method and the guideline for an capability to loading of dismantling equipment weight can reasonably evaluate the capacity of structural member in demolition and use effectively as increasing efficiency and improving safety of demolition through proper management of dismantling equipments.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.264-270
• /
• 2010

This paper presents an application of the Ecological Interface Design (EID) theoretical framework for developing an optimal display of railway safety monitoring system (SMS) in stations. Especially, Work Domain Analysis (WDA) which is the preceding research for EID was conducted. This study proceeds as follows: First, urban railway SMS in stations was defined as a system boundary for WDA, and work environment for station personnels was analysed through Abstraction Hierarchy (AH). AH represents five levels (Functional Purpose, Values and Priority Measures, Purpose-related Functions, Object-related Process, Physical Object) of informations that station personnels obtain from work environment, and Work Domain Model (WDM) was derived as a result of the AH. To confirm how well WDM represents the real work environment of SMS, Scenario Mapping was conducted with experts who has been working as a station personnel for more than ten years. Lastly, thirteen additional information requirements that are not provided by the existing SMS as well as all the information that are provided by the existing SMS were extracted using confirmed WDM. These information requirements can be used as essential information for EID of urban railway SMS.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.64-71
• /
• 2020

In recent years, many infrastructure have been rapidly aging around the world, which grows interest in the maintenance of the infrastructure. Among the social infrastructure, bridge is a very important structure to transport lots of human and various products. The performance evaluation of bridge can be divided into the condition evaluation and safety evaluation, proposed by Korea Infrastructure Safety and Technology Corporation. However, there are no separate criteria for the performance evaluation of three-class bridges. In general, the performance of bridge is dominated by the results of the condition evaluation, which is lower than that of the safety evaluation. Therefore, this study assessed the correlation between the condition evaluation of superstructure and bridge and also between the condition evaluation and the safety and load-carrying capacity of bridge. The results of the study would provide a basic data for the more quantitative and higher relevant performance evaluation of the existing bridges, particularly for three-class bridges.

• Journal of the Korean Institute of Gas
• /
• v.21 no.2
• /
• pp.32-40
• /
• 2017

Safety Instrumented Systems (SIS) have wide application area. They are of vital importance at process plants to detect the onset of hazardous events, for instance, a release of some hazardous material, and for mitigating their consequences to humans, material assets, and the environment. The integrated safety systems, where electrical, electronic, and/or programmable electronic (E/E/PE) devices interact with mechanical, pneumatic, and hydraulic systems are governed by international safety standards like IEC 61508. IEC 61508 organises its requirements according to a Safety Life Cycle (SLC). Fulfilling these requirements following the SLC can be complex without the aid of SIS supporting tools. This paper presents simple SIS support tool which can greatly help the user to implement the design phase of the safety lifecycle. This tool is modelled in the form of Android application which can be integrated with a Web-based data reading and modifying system. This tool can reduce the computation time spent on the design phase of the SLC and reduce the possible errors which can arise in the process. In addition, this paper presents an optimization approach to SISs based on cost measures. The multi-objective genetic algorithm has been used for the optimization to search for the best combinations of solutions without enumeration of all the solution space.