• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.485-490
• /
• 2020

Recently, amid active research on domestic shipbuilding industry and IT convergence technology, with the development of satellite detection technology for ship safety operation, ships monitored the movement of ships with the mandatory long-range identification & tracking of vessels and automatic identification system. It is possible to help safe navigation, but it is necessary to develop safety device that alert the marine officer who rely on radar to correct conditions in case of weightlessness. Therefore, an ocean fog alarm system was developed to detect and inform using photo sensors. The fabricated ocean fog detect and alarm system consists of a small, low-power optical sensor transceiver and data sensing processing module. Through experiment, it is confirmed that the fabricated ocean fog detect and alarm system measure the corresponding concentration of ocean fog for fogless circumstance and fogbound circumstance, respectively. Furthermore, the fabricated system can control RPM of ship engine according to the concentration of ocean fog, and consequently, the fabricated system can be applied to assistant device for ship safety operation.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.8
• /
• pp.139-147
• /
• 2021

In this study, we proposed the possibility of reliability analysis of risk index by using Monte Carlo simulation as basic data of safety accident occurrence data and expert opinion by construction industry type. Through this, it is expected that risk index for safety accidents according to detailed types of works will be presented stochastically and it will be possible to predict the risk factors and the expected range of damage based on the reliability analysis in the construction safety management plan. It will also reduce many of the planning risks that are common to decision makers in the field of construction management. In identifying risks, road bridge construction was classified into earthworks, drainage works, and bridge construction, and possible safety accidents were classified based on expert data. The risk index was calculated for each detailed construction of road and bridge construction, drainage construction, and bridge construction.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.53-60
• /
• 2022

Recently, as the amount of data collected by drones has rapidly increased, it is necessary to support cloud computing technology that can securely and efficiently store and process data. However, various security threats such as stealing, leaking, or tampering with data communicated by drones can occur due to attackers. Therefore, there is a need for security technology to provide secure communication of data collected from drones. Among various security technologies, the KP-ABE scheme, which is attribute-based encryption, is a security technology that satisfies two characteristics: data encryption and user access control. This paper researched the KP-ABE scheme and proposed a secure data access control scheme to the drone environment. This proposed scheme provides confidentiality and integrity of data communicated in a drone environment and secure access control and availability. In addition, it provides a fast ciphertext search and constant size ciphertext among the requirements to be provided in the KP-ABE scheme.

• Journal of the Korea Institute of Construction Safety
• /
• v.4 no.1
• /
• pp.9-15
• /
• 2021

Recently, buildings have become larger, more complex, and various construction methods have been tried. As a result, the use of construction equipment continues to increase, as well as safety accidents. According to the Ministry of Employment and Labor's report on industrial accidents, the rate of deaths caused by construction equipment among construction accidents has been increasing steadily since 2009. In the safety field of other industries such as crime and traffic, research has been continuously conducted to develop quantitative indicators due to demands for development of evaluation indicators or risk index development. On the other hand, construction equipment has been studied to analyze disaster cases and come up with improvement measures, but there is no research related to risk index. Therefore, the research will develop a quantitative index that can determine the risk level of construction equipment in the field based on the accident case and verify the possibility of use in the field.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.31-42
• /
• 2021

Recently, virtual reality (VR) and augmented reality (AR) technologies are attracting attention as core technologies in the era of the 4th industrial revolution. These virtual and augmented reality technologies are being used in a variety of industries, including the construction industry, healthcare industry, and manufacturing industry, to innovate in communication and collaboration, education and simulation, customer service and reinvention of the customer experience. In this paper, VR-based experiential safety education was conducted for workers of shipbuilding companies in Ulsan city, and for them, the educational effectiveness such as immersion, site applicability, safety accident prevention, education satisfaction, overall performance, and safety behavior in VR-based safety experience education were measured. In addition, we examined whether the immersion of VR-based safety experience education affects site applicability, safety accident prevention, educational satisfaction, overall performance, and safety behavior. Furthermore, it was analyzed whether site applicability plays a mediating role in the relationship between immersion and safety accident prevention. As a result, it was found that the immersion of VR-based safety experience education affects site applicability, safety accident prevention effect, education satisfaction, overall performance, and safety behavior, and that site applicability mediates between immersion and safety accident prevention. Based on these results, we suggests a direction for the development of VR-based contents in the field of safety and health and the transformation of safety and health education in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.22-30
• /
• 2021

Objectives: The objectives of this study were to develop a quality control protocol of inorganic acids using ion chromatograph and to evaluate analytical proficiency of the legally designated agencies. Methods: This study prepared inorganic acid samples by injecting three anion certified solutions (chloride, nitrate, and sulfate) on the quartz filters. To investigate the storage stability and concentration consistency of the samples, 240 samples for each anion were tested at weeks 0, 2, 4, 8, 12, and 16 while storing at 4℃ and 25℃. To evaluate analytical proficiency, two separate testings were administrated for six skilled analysts and 46 analysts affiliated with legally designated agencies. Results: Average recoveries of the three ions after 16 weeks of storage were fairly high (over 95%). In addition, average recoveries (chloride = 97%, nitrate = 96%, and sulfate = 103%) after 16 weeks of storage at low temperate were relatively higher than those (94%, 93%, and 98%) at room temperature. The coefficients of variation (CV) for the three ions were less than 5% except for the sulfate sample at 5.56 ㎍ (CV = 12.4%). The average ratios of the concentration values analyzed by the legally designated agencies to the injected concentrations were close to 1. However, their CVs were relatively greater (chloride ≤ 49%, nitrate ≤ 14%, and sulfate ≤ 28%), which implies a need for quality control. Conclusions: The quality control protocol used in this study for the three inorganic acids can be utilized in the quality control for ion chromatography.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.102-107
• /
• 2022

South Korea will soon be a super-aged society, as more than 20.6% of its population will be 65 years and older by 2025. As of 2022, 17.5% of the total population in South Korea is 65 years and older, which exceeds the set threshold for an aged society, where more than 14% of the population is 65 years and older. The proportion of older subway construction workers has increased. Aging workers and their work stress negatively impact their workability. A previous study demonstrated that the stress index measured using the uBioMacpa measurement device (Macpa stress index) had a significant correlation with work stress in South Korea. The device tests vascular health and measures stress levels via Macpa signal analysis. In this study, the pulse waves of subway construction workers were measured using uBioMacpa to identify their stress levels. The stress levels were analyzed by age, years of service, job position, employment type, and work type. Herein, these statistics could not be easily represented by a normal distribution; therefore, the Kruskal-Wallis test, a nonparametric statistical method, was used for the analysis of data. The results showed that age, job position, employment type, and working type affected the Macpa stress index and the stress levels of workers increased with age. In terms of job position, technical engineers were more stressed than other workers because of their poor working environment. In terms of employment type, daily-wage workers were more stressed than other workers. In terms of working type, tunneling, waterproofing, and construction scored the highest Macpa stress indexes without any significant difference, whereas earthworks scored the lowest. Based on the analysis of Macpa stress index, safety and health management plans were proposed to reduce the stress levels of workers. Moreover, a manual for efficient stress management must be developed for subway construction workers.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.89-95
• /
• 2022

A method for measuring the length and slope of a temporary structure using an unmanned aerial vehicle (UAV) and 3D modeling method is proposed. The actual length and slope of the vertical member of the specimen were measured and compared with the measured values obtained by the proposed method for the specimens with and without the vertical protection net installed. Based on the result of measuring the length of the temporary structure specimen using the UAV and 3D modeling method, the measured value showed an error of 0.87% when compared to the actual length in the specimen without the vertical protection net installed. In addition, the error of the slope was 0.63°. It was thought that the proposed method could be usable for the purpose of finding parts in wrong installation state on the temporary structure and informing the manager in charge. However, in the case of the specimen with the vertical protection net, the measurement showed a 1.46% error in length and 2.77° difference in slope. Therefore, if a vertical protection net is to be installed in a temporary structure, the measurement accuracy should be improved by utilizing an image processing method, etc.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.775-785
• /
• 2022

By analyzing the operation status of fire safety management of small construction site workers, deriving problems, and suggesting improvement measures, this study was conducted to present practical basic data for their efficient use in the future, and the following conclusions were drawn. First, it was analyzed that small construction site workers are elderly in the age group of construction workers, have short construction skills, most of the jobs are working in the construction industry, and the employment type is non-regular workers. Second, the fire safety management improvement plan of small construction site workers is systematized, fire safety manager is deployed to manage fire risk, fire escape routes and emergency warning facilities are provided to inform all workers at the construction site. In addition, measures to reduce industrial accidents are needed through realistic evacuation training, fire VR training, and interesting educational programs.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.3
• /
• pp.23-29
• /
• 2022

The frequency of localized heavy rain is increasing due to the influence of abnormal climate that is rapidly increasing in recent years. As a result, the difficulty of safe water resource management is increasing and human and material damage is increasing. Various countermeasures are being established to reduce the damage caused by localized heavy rain, but small-scale mountain catchments are experiencing many difficulties due to the lack of a basic plan. Therefore in this study the risk of flooding was evaluated using the rainfall-runoff model in the Yu-pyeong catchment national park among national parks in Korea. As a result of the analysis, it was simulated that flooding occurred in the Yu-pyeong catchment of Mt. Jirisan when rainfall with a recurrence frequency of 50 years or more occurred, and it was confirmed that there was a high risk of structures, safety facilities and trails.