• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.186-196
• /
• 2004

In each country, the periodic ISI(In-Service Inspection) is required by the law to protect the public health and property from the potential accident of the nuclear facilities. To support the implementation of ISI program, the prescriptive ISI technical standards have been established. As the key parts of the ISI program, the non-destructive examination techniques are widely used to identify the degree of degradation of the pressure boundary components and welds. Recently, the risk informed-ISI program has been developed and implemented in several countries. Nonetheless, the existing ISI program which prescriptively decides the scope of inspection still has its own significance. In this article, the technical standards of ISI in leading countries like US, france, Canada, and Japan are reviewed and compared with the safety guide by IAEA. An outline to revise the domestic technical standards of ISI has been suggested.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.1 s.4
• /
• pp.153-159
• /
• 2002

Disasters are the phenomena that we have to prevent the occurrence in order to keep the safety to human lives and properties, and if occurred, we have to minimize the economic, social, and mental costs of the occurred disasters or incidents. This research analyzes the optimal location of fire stations in terms of served population maximization in Seoul. This research introduces "the maximal covering location problem(MCLP)," one of the optimization techniques, as the primary research method. This research also applies a geographic information system into spatial distribution analyses of existing fire stations and observed fire incidents. Results from the analyses show that the existing location of fire stations and branches need to be improved. The dispatch location of fire engines should be reconsidered for rapid services of fire fighting.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2004.04a
• /
• pp.199-217
• /
• 2004

터널 설계에 있어 갱구부의 위치 및 갱문형식의 선정은 터널 및 갱구사면의 안정성뿐만 아니라, 주위환경과의 조화 및 자연환경 훼손 최소화 등과 같은 환경적인 측면에서도 매우 중요한 부분이다. 현행 국내의 경우 경제성과 시공성 위주의 갱구부 위치 선정으로 과다 절취구간이 발생되어 환경훼손, 민원문제 발생, 과다한 용지 매입비용 등의 여러 가지 부작용이 발생되고 있다. 또한, 갱문 형식의 선정에 있어서 갱구부의 지형여건 및 제반 환경적 영향을 고려하지 않고 원통절개형과 면벽식 갱문의 획일적인 적용으로 주변지형과의 부조화를 이루는 사례가 다수 발생하고 있으며, 갱구부 상단의 유실된 토석이 완충공간의 부족으로 도로 노면상에 낙하되는 사고가 발생하고 있어 그에 대한 대책이 필요한 실정이다. 이와 같은 문제점을 보완하기 위해 갱구부 절취구간 최소화를 위한 구체적인 최소토피고 기준을 마련하였으며, 갱구상단 지형경사의 완급, 갱문주위의 배수기능, 낙석${\cdot}$산사태 등의 발생가능성 등을 고려한 새로운 갱문형식을 제안하고 체계적인 검토를 수행하였다. 이를 통해 점차 강화되는 환경보호정책 방향에 부응하고 자연환경 훼손을 최소화하며, 특히 해빙기와 집중호우시 낙석${\cdot}$눈사태로부터 도로의 안전을 확보할 수 있는 터널 갱문부 설계기준을 제시하였다. 또한, 실제 고속도로 터널의 설계 적용사례를 통하여 본 설계기준의 적용성을 분석하였으며, 실제 갱문 시공사례를 소개하여 향후 설계 및 시공에 도움이 되고자 하였다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.4
• /
• pp.359-372
• /
• 2005

The strong protection method of radiation emergency preparedness is the evacuation when a great deal of radionuclide material is released to environment. Required factors for evacuation time estimate of Ulchin nuclear power plant site were investigated. The traffic capacity and the traffic volume by season were investigated for the traffic analysis and simulation within EPZ of Ulchin site. As a result, the background traffic volume by season were established. The NETSIM code was applied to simulate for 12 scenarios in the event of normal traffic/summer peak traffic/winter peak traffic, daytime/night, and normal weather/adverse weather conditions. The results showed that the evacuation time required for total vehicles to move out from EPZ took generally $210\~315$ minutes. The evacuation time took longer about 45 minutes at night than in the daytime, and 45 minutes in adverse weather than normal condition.

• Fire Science and Engineering
• /
• v.21 no.4
• /
• pp.105-114
• /
• 2007

Recently the consideration for occupants' security has been raised as very important design element from the fire by building's large sized, higher storied, and its compounded. But the domestic Laws regulated the predicative laws according to the technical standard which has no difference from the past domestic evacuation regulations. Therefore when big fire occurs, it is not enough to guarantee for occupants to escape safely. Specially since domestic escape relevant laws are divided into Architect relevant law and fire fighting relevant law, it has caused to bring various problems. So This study will show the problems of the evacuation regulation which is registrated in the Architect relevant law and fire fighting relevant law. And also later, when Architect escape relevant laws re-registrate, this study will be used as foundational materials.

• Culinary science and hospitality research
• /
• v.15 no.1
• /
• pp.296-308
• /
• 2009

According to Lee In-ja's research into the cooks of Korea, there are more than 1.2 million culinary professionals in Korea. However, it is hard to find studies on their work environment. From this point, this study aims to examine the shoes worn by culinarians in their workplace and facilitate the improved environment to protect culinary professionals against potential dangers such as slips, occupational and industrial injuries and fatigue, on the basis of the shoes they wear. The research was conducted on a representative cross section of safety shoes currently worn by culinary professionals. The four factors to be tested and measured for the study were weight, slip resistance, internal tearing strength and splitting resistance. Findings on inquiry showed that the shoes tested were quite heavy, slippery and readily liable to splitting under low stress - when compared to standardized base figures. In accordance with the results of this experiment, guidelines for four factors of manufacture were suggested. First, chef's shoes should weigh not more than 1% of a wearers weight. Second, they should exhibit more than 0.50 $\mu$ slip resistance. Third, they should withstand at least 50.0 N/mm tearing strength. And finally, they should have upwards of 3.0 kg/cm splitting resistance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.429-431
• /
• 2013

Today the role of Vessel Traffic Service(VTS) is increasing due to the function to preserve the safety of marine traffic and harbour, improve the efficiency of harbour, protect the marine environment. However, Vessel Traffic Service(VTS) lacks the international and domestic legal basis. For this reason it is hard to fulfill the positive and systemic operation of Vessel Traffic Service(VTS). It is essential to establish a domestic legal basis upon which to perform function and role of Vessel Traffic Service(VTS) fully. The purpose of this study is to propose the directing point for the adequate regulation of vessels to participate in Vessel Traffic Service(VTS) by doing a comparative analysis between domestic regulations and other countries's regulations.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.7-13
• /
• 2021

Recently, due to the many features and advantages of cloud computing, cloud service is being introduced to countless industries around the world at an unbelievably rapid pace. With the rapid increase in the introduction of multi-cloud based services, security vulnerabilities are increasing, and the risk of data leakage from cloud computing services are also expected to increase. Therefore, this study will propose an AWS Well-Architected based security architecture configuration method such as AWS standard security architecture, AWS shared security architecture model that can be applied for personal information security including cost effective of cloud services for better security in AWS cloud service. The AWS security architecture proposed in this study are expected to help many businesses and institutions that are hoping to establish a safe and reliable AWS cloud system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.43-52
• /
• 2023

Traffic accidents among children have been decreasing after the installation of yellow carpets. However, the explanatory power of the causal relationship between yellow carpet installation and traffic accidents is still insufficient. The yellow carpet effect was analyzed in greater depth using virtual reality (VR) simulation experiments in various situation that could not be evaluated in existing actual vehicle research studies due to difficulties or risks in implementation. A target site where an actual yellow carpet was installed was selected and, implemented into a virtual environment. Subjects were made to, were gaze measurement equipment and ride the simulator. The visual/driving behavior before and after yellow carpet installation was compared, and a t-test analysis was performed for statistical verification. All the results were found to be statistically significant.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.77-77
• /
• 2013

최근의 산업활동에서는 신규 원료 개발과 생산 효율성을 높이기 위하여 분체 공정이 증가하고 있는데, 미세 분진의 취급으로 분진운의 형성과 착화가 용이해지므로 분진폭발이나 화재 위험성이 증가하고 있다. 분진을 안전하게 사용하고 저장, 취급하기 위해서는 착화 전의 위험성 지표로서 최저발화온도(MIT ; Minimum Ignition Temperature)를 사전에 파악해 두는 것이 중요하다. 분진농도의 발화온도는 장치 내의 발화위험성이나 분진 취급 공정의 사고예방대책 관리를 위한 실용적 관점에서 중요하게 활용되는 폭발특성값이다. 또한 분진의 발화온도는 분진농도에 의존하며 농도변화에 따른 가장 낮은 온도를 MIT라고 한다. 본 연구에서는 화재폭발사고 빈도가 줄지 않고 있는 Mg 및 Mg-Al합금(60:40 wt%, 50:50 wt%, 40:60 wt%)을 대상으로 조성비율에 따른 최저발화온도를 실험적으로 조사하였다. Mg 및 Mg-Al(60:40 wt%), Mg-Al(50:50 wt%), Mg-Al(40:60 wt%) 시료의 평균입경은 142, 160, 151, $152{\mu}m$이다. MIT실험장치는 IEC 61241-2-1(Methods for Determining the Minimum Ignition Temperatures of Dust, 1994)에 준거하여 제작하여 사용하였다. 실험장치는 가열로, 분진운 시료홀더, 온도조절장치, 압축공기 제어장치 등으로 구성되어 있다. 구체적인 실험방법은 시험분진를 분진홀더에 장착하고 0.5 bar의 압축공기를 0.3 sec 동안 사용하여 일정 온도로 가열된 로의 내부로 분진운을 부유시킬 때에 분진운이 발화하여 가열로 하단부의 개방구에까지 화염이 전파하는지를 디지털비데오카메라로 기록, 평가하여 발화 유무를 판정하였다. Mg합금에 대한 MIT를 측정한 결과 $740^{\circ}C$가 얻어졌으며, Mg-Al(60:40 wt%)의 MIT는 $820^{\circ}C$로 조사되었다. 그러나 Mg-Al(50:50 wt%) 및 Mg-Al(40:60 wt%)에 대해서는 최대 가열로의 설정온도를 $890^{\circ}C$까지로 하여 농도를 변화시키면서 조사하였으나 발화가 일어나지 않았다. 문헌에 따르면 Mg입자 표면의 산화피막은 다공성으로 일정 온도에서 산화반응이 시간에 따라 직선적으로 증가하는데 반하여, Al의 산화피막은 보호 작용을 하여 일정 온도에서 산화반응속도가 표면과 내부의 농도 기울기에 의한 확산속도에 의존한다고 보고하고 있다. 본 연구결과를 토대로 Mg-Al합금의 발화특성을 고찰해 보면, Mg-Al합금에서 자기 전파성이 작은 Al성분의 증가는 착화지연이 증가하여 연소성이 감소하여 최저발화온도의 증가로 이어지는 것으로 추정되었다. 또한 발화온도는 주어진 조건의 온도장에서 분진이 존재하는 시간 길이에 따라 변화하므로, 발화온도를 실험적으로 측정하는 경우에는 측정장치나 방법에 따라 달라지므로 사업장의 현장에 발화온도를 적용하는 경우에는 장치 내의 분진의 존재시간을 고려할 필요가 있다.