• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.537-538
• /
• 2011

본 논문에서는 전동 휠체어를 이용하여 이동할 때 안전운전을 위한 반 자율 보조 장치를 제안한다. 제안된 전동 휠체어 보조 장치는 장애물 감지를 위한 초음파 센서와 현재 방향과 위치를 확인하기 위한 엔코더를 사용하여 이동시 발생할 수 있는 안전사고를 미연에 방지할 수 있도록 설계하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.06a
• /
• pp.64-69
• /
• 2000

오늘날 분진은 석유 화학공업, 제약공업, 플라스틱공업 등 기능이 점점 다양화되고 있으며 산업분야에서도 광범위하게 이용되고 있다. 그로 인해 분진 폭발사고는 대형 공정에서뿐만 아니라 저장, 취급, 운송하는 일반화된 공정에서도 정전기 방전등의 점화원에 의해 화재 및 폭발의 위험성이 증가하고 있다. 이러한 재해를 미연에 방지하기 위해 안전관리의 일환으로 분진의 최소착화에너지(Minimum Ignition Energy; MIE)를 측정하여 관리하고 있다. (중략)

• Journal of the Korea Construction Safety Engineering Association
• /
• s.50
• /
• pp.71-79
• /
• 2009

Construction companies economic to lighten the restrictions on safety education and training due to the domestic recession as long as the global downturn. With this, the Korean government restrictions, but the incidents are being sharply increased nowadays. The construction industry hazardous than any others, so, they insist to reinforce the training for incidents prevention, to be disregarded at the subcontractors of the bigger construction companies problems. According to these matters, this study hereby surveyed regarding their suggestions for the improvements of the training concepts through questionnaires below.

• Journal of the Korean Society of Safety
• /
• v.4 no.1
• /
• pp.99-102
• /
• 1989

消火器에 의한 安全事故는 주로 加壓式消火器로 인하여 發生하는 경우가 많으며 現在 國內에서 널리 使用되고 있는 消火器는 大部分이 加壓式消火器이고 粉末消火器가 그 主種을 이루고 있다. 이 粉末消火器는 消防法令에 의하여 設置하여야 할 消防對象物 뿐만아니라. 一般家庭에서도 많이 利用되는 등 初期宵火活動에 效果的이고, 經濟的인 消火器具이다. 그러나, 消火器의 點檢, 整備不良 및 取扱不注意등에 의한 人事事故가 頻繁하게 發生하고 있는 實情이므로 事故를 未然에 防止하기 위하여 粉末消火器의 構造, 事故發生 要因 및 取扱시 注意事項등을 살펴 보고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.327-330
• /
• 2010

어선의 해양사고 중 가장 많이 발생하는 충돌사고의 경우 선박 운항자의 졸음 등의 이유로 경계를 소홀이 하여 발생하는 경우와 어로 작업 중 접근하고 있는 상대선을 발견하고도 어로 작업 특성상 조종성능이 극도로 제한되어 적절한 피항 동작을 하지 못하여 발생한 경우가 대부분이며 이는 성어기의 어선 조업 특성상 선박의 조종업무를 수행할 수 있는 선장의 업무과중에 의한 피로누적과 어로 작업 특성상의 조종성능제한에 의해 기인한 것으로 판단되어 동해지방해양안전심판원 관할구역 내에서 주로 행해지는 자망, 채낚기, 기선저인망, 동해구 트롤어업의 조업 형태에 따른 어선 선원의 작업 여건과 각 어업별 어로 작업 중인 선박의 운항 성능에 대해 알아보고 충돌사고 방지를 위한 대책을 제안하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.577-578
• /
• 2016

This paper presents a method of vehicle safety system using a pulse sensor which will be able to occurs drowsy driving accident when people driving. The proposed vehicle safety system alarms according to the driver drowsy condition, therefore the driver prevent the direct and $2^{nd}$ accident beforehand cognitive unexpected and dangerous accident using vehicle safety system.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.179-184
• /
• 2012

A car accident on a highway occurs a chain-reaction collision because of a vehicle's fast velocity. In order to prevent it, the accident vehicle should broadcast a safe message to its neighbors. If there are many neighbor nodes, a frame collision probability is high. To solve this, it was proposed for a system as a previous study to send a safe message without frame-collision using separating channels. However, the separation of multiple channels make feasibility low because of increasing hardware's development cost and complexity. In this paper, we proposes a TDMA-based MAC protocol using a single channel. As a result, we show the frame reception success rate of our protocol was almost the same as the previous protocol.

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.107-115
• /
• 2019

Effective construction safety management systems are desperately required for reducing damage caused by increasing safety accidents in construction sites. Safety accidents in construction sites can effectively protect if proactive measures are taken to prevent unauthorized worker access the expected hazardous area. In this study, we have developed a IoT(Internet of Things)-based dangerous zone alarming system for safety management in construction sites, which can be operated at low cost in large-scale sites as well as small and medium-sized construction sites. The development system utilizes a Zigbee-based beacon technology and cellular mobile communication technology to detect when authorized workers, unauthorized field workers or outsiders approaches hazardous zones. If somebody approaches the dangerous zones the system notifies immediately to the safety manager with a danger warning signal. It is expected that this system can effectively prevent safety accidents when applied to construction sites.

• Journal of the Korea Institute of Construction Safety
• /
• v.5 no.1
• /
• pp.9-16
• /
• 2023

Gang-foam is used in many construction projects because it is not only precise in terms of vertical, horizontal, and specifications, but also easy to install and dismantle. However, major accidents occur every year due to non-compliance with safety rules and work order, also manuals and checklists currently in use are insufficient. Thirty-seven surveys was conducted by analyzing major accident cases of domestic gang-form construction project and deriving 20 risk factors and 43 check points. Based on the survey, the importance and appropriateness of check points were evaluated. As a result of this study, a checklist was presented, check points were placed in the order of importance based on assembly, installation, dismantling, and lifting of the Gang-form process. The checklist was organized so that workers could comply with safety rules and work order. Through this, it is expected to prevent major accidents and contribute to efficient safety management.

• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.377-385
• /
• 2013

Since the late 1950s, concerted efforts to reduce the accident rate in aviation have yielded unprecedented levels of safety. Although, the overall accident rate has declined considerably over the years, unfortunately reductions in human error-related accidents in aviation have failed to keep pace with the reduction of accidents due to environmental and mechanical factors. Today, a very large percentage of all aviation are attributable, directly or indirectly, to some form of human error. As a result of many study, a range of prevention of human error have been developed. but each of kind is lack of a precision, effectiveness and seem to be considered for aspect of deficiency as an systematic accessibility. So, we're going to analysis the most effective and systematic prevention of human error and study on consolidating method for human error and aviation safety. In this study, several alternatives for the prevention of human errors a priority to understand and solve problems by identifying the implications for human error to be presented.