• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.110-116
• /
• 2009

Research for climate control seats is being vigorously pursued because requests for passenger's thermal comfort are increasing. Recently, thermoelectric devices have been applied to automotive seats for both cooling and heating operations. The climate control seats using thermoelectric devices can rapidly control the air temperature passing through the devices and directly affect the thermal comfort of passengers. The performance characteristics of the climate control seats were analyzed by experiments for two different types of a leather covered seat and a mesh applied seat. Experimental results show that the cooling and heating performance for the mesh applied seat by using the discharge port of the shape of nozzle was improved significantly in comparison with that for the leather covered seat. The variation of temperature between the inlet air and the outlet air of the climate control seat for the enhanced mesh applied type was by $-3.5^{\circ}C$ at cooling mode, and was by $15.0^{\circ}C$ at heating mode, after about 30 minutes, respectively. Also, it is possible to provide rapid thermal comfort to passengers sitting on the seat in the vehicle cabin by using the proposed climate control seat.

• Archives of design research
• /
• v.12 no.1
• /
• pp.157-166
• /
• 1999

With the increase in use of the computer, the VCT syndrome has occured as a new socialJhea/health problem. ErgonomicaI design standards are a for the users to reduce stress and poor physical posture in the human body. In this study. we have suggested design dimensions recommended from previous studies. We also have reviewed users' preference dimenision, and analyzed differences between users' preference dimenision. and the previous design aiteria to verify physical appropriateness. We analyzed how each design dimension was reached and affected the tunan body by objective EMG evaluation. and subjective evaluation of physical discomfort and oorrIort. We have found that keyboard height is very important in a workstation. If the elbow's height is lower than the keyboard's height. it effedS the hand and wrist. If higher, it brings fatigue to the shoulder and neck. As a result of this experiment. we suggested that the height of a keyboard desk for Koreans be 660mm for the fixed type and 540-774mm for the adjustable type. Also other design reoommendations were suggested in the thesis. In ooncIusion, our research will be very important in the database because it provides adjustable ranges to fit user's body types in the various design flekIs.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.164-172
• /
• 2008

This paper investigates passengers' perceptions of the importance and satisfaction of airline service quality for improving the quality level of airline service. Importance-performance analysis(IPA) was utilized to analyze the gap between importance and performance of airline service qualify The result showed that passengers' perceptions of the importance and performance of airline service quality differed for Korean international air passengers. In particular, IPA analysis revealed that four attributes 'meal service', 'seating comfort', 'seat space and legroom', 'check-in service' were identified in the Concentrate Here quadrant-perceived to be important, yet perceived as being performed poorly. The airlines operating from/to the Republic of Korea should concentrate on the attributes included in this quadrant to improve the quality of airline service. On the basis of the IPA analysis, airlines should identify their strengths and weaknesses and draw up a plan to maximize their profits.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.4
• /
• pp.57-66
• /
• 2019

Purpose - Present study aimed at investigating the factors that may affect consumers' decision confidence and decision comfort inducing choice commitment taken place at the stage of post-decision/pre-outcome. This study explored whether there are positive effects of dominance and instrumentality of chosen product on the decision confidence, and also identified whether there are positive effects of choice easiness and goal achievement-related affect felt at the chosen product on the decision comfort. Research design, data, and methodology - Portable digital camera as experimental product was used. 260 data were collected from college students. Four were removed from the analyses because they did not complete the questionnaire. Eighteen were removed because they indicated not experiencing the camera in the past. 238 data were used at the analyses to verify hypotheses by structural equation model in AMOS 21.0. Results - First, both of the consumers' decision confidence and decision comfort positively affected choice commitment. Second, the dominance as well as the instrumentality had positive impact upon the decision confidence. Third, the choice easiness and goal achievement-related affect felt at the chosen product had positive impact on the decision comfort. In sum, present study identified the mediation roles of the decision confidence in the effects of both dominance and instrumentality of the chosen product on forming choice commitment, and also found the mediation roles of the decision comfort in the effects of choice easiness and goal achievement-related affect felt at the product on forming choice commitment. Conclusions - Focusing on the stage of post-decision/pre-outcome in decision making process, present study contributes to advancing the choice commitment theories by exploring the positive effects of both dominance and instrumentality of chosen product on the decision confidence, and by finding the positive effects of both choice easiness and goal achievement-related affect felt at the chosen product on the decision comfort. Marketers should promote their products' dominance and instrumentality by showing the superior roles of their product attributes in achieving consumption goal, and should help consumers feel comfort by making choice process easier and giving information that could help feel the goal achievement-related affect at their product chosen.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.609-616
• /
• 2021

Busan still has a lot of densely populated poor residences on sloping hills, especially in the area behind the port, which is heavily affected by plans related to port facilities. In particular, the residential area of Dong-gu, Busan, is expected to see the Bukhang Redevelopment Area, and the landscape change is expected to be significant where the residential environment improvement project is currently planned. In this study, the landscape image analysis and prediction (SD analysis and factor analysis) of the poor residential area of Dong-gu, Busan is expected to be able to organize, organize the image of the area.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.646-653
• /
• 2021

The medical bed developed in this study consists of N keys and each is driven vertically by an actuator. Since M sensors are mounted on each keyboard to measure body pressure, the resolution of the body pressure map is determined by the MN. A sensor controller is mounted on each keyboard, and the body pressure values measured from M sensors are transmitted to the main controller through a serial communication network such as CAN (Car Area Network). Each keyboard is equipped with a servo driver that drives a motor, and it is connected to the main controller via CAN to control the height of the keyboard according to the displacement value indicated by the main controller. In addition, the maximum body pressure value and body pressure ratio applied to each part of the keyboard are calculated and used as the basic data for controlling bed comfort by artificial intelligence. As a result, the proposed system can be a foundation that can be used for the control of body comfort and pressure sore prevention by artificial intelligence to be developed in the future.

• Journal of Biomedical Engineering Research
• /
• v.44 no.2
• /
• pp.157-165
• /
• 2023

The purpose of this study was to evaluate the importance of developing slim seats with ergonomic design to improve seat comfort and expand the interior space. Two seats were used for the experiment: a sample seat designed based on hip shape and spinal alignment and a normal seat with a flat design without curves. Subjects sat in both the sample seat and a normal seat applied to the vehicle simulator and the experiment was conducted. The next part of the experiment was conducted in two different postures: a driving posture and a relaxed posture. The subjects filled out a comfort questionnaire immediately after sitting and after 30 minutes. The results showed that the comfort in the sample seat was found to be more comfortable than the normal seat. However, no significant difference was noted for the relaxation posture. Pressure distribution was also recorded immediately after sitting and after 30 minutes. In the case of pressure distribution, it was confirmed that the pressure in the sample seat was more evenly distributed in both the driving and relaxed postures than in the normal seat. The results showed that the ergonomically designed sample seat greatly improved seating comfort and pressure distribution compared to the normal seat, which is a general vehicle seat design.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.169-178
• /
• 2008

Level of Service (LOS) is one of ways to evaluate operational conditions. It is very important factor in evaluation especially for the facility of highways. However, some studies proved that ${\upsilon}/c$ ratio and accident rate is appeared like a second function which has a U-form. It means there is a gap between LOS and safety of highway facilities. Therefore, this study presents a method for evaluation of a signalized intersection which is considered both smooth traffic operation (delay) and traffic safety (accident). Firstly, as a result of our research, accident rates and EPDO are decreased when it has a big delay. In that reason, it is necessary to make a new Level of Service included traffic safety. Secondly, this study has developed a negative binominal regression model which is based on the relation between accident patterns and stream. Thirdly, standards of LOS are presented which is originated from calculation between annual delay costs and annual accident cost at each intersection. Lastly, worksheet form is presented as an expression to an estimation step of a signalized intersection with traffic accident prediction model and new LOS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.527-533
• /
• 2010

The feeling that is evoked when products are handled has become increasingly important in the design of products primarily used by humans. In the traditional product design process, prototypes are built several times in order to evaluate the feeling evoked during use. However, these design processes can be optimized by adopting a haptic simulator that can serve as a prototype. The design method based on the use of the haptic simulator is called haptics-aided design (HAD), which is the main subject of this paper. Here, a new HAD method that can be effectively used to design a custom-made chair is proposed. A haptic simulator, which is composed of a haptic chair and an intuitive graphical user interface, was developed. The simulator can adjust the impedance of the backrest and seat pan of a chair in real time. The haptic chair was used instead of real prototypes in order to evaluate the comfort of the initially designed seat pan and backrest on the basis of their stiffness and damping values. It was shown that the HAD method can be effectively used to design a custom-made chair and can be extended to other product design processes.

• Archives of design research
• /
• v.12 no.3
• /
• pp.73-80
• /
• 1999

Many domestic users complain about severe pain to the waist, neck, and shoulder as well as work performance because the domestic chair design was developed with western anthropometry dimension and design criteria. Ergonomic design standards are needed for office chair design to reduce stress and poor physical posture for various user body types. In this study, we have suggested design dimensions recommended from previous studies and Korean anthropometry data. We also have reviewed users' preference dimension through measured subjects and analyzed differences between users' preference dimension and the previous design criteria to verify physical appropriateness. We evaluated general office chairs and adjustable chairs which can adjust to fit each person. we also analyzed how each design dimension was reached and affected the human body by evaluation of physical discomfort and comfort. We have found seat height is very important in a workstation. If the seat height is high, it effects the thigh. If width, height, and angle of the backrest are wrong, fatigue to the shoulder, neck, and waist, etc.. As a result of this experiment, we suggested that the height of a seat for Koreans be 425mm for the fixed type and 365-484mm for the adjustable type. Also other design recommendations were suggested in the thesis. In conclusion, our research will be very important in the database because it provides adjustable ranges to fit user's body types in the various design fields.