• 한국지리정보학회지
• /
• 제20권1호
• /
• pp.15-25
• /
• 2017

최근 국제적으로 환경 및 기후변화 대응, 자원개발, 북극항로개척 등 남/북극을 통합한 양극해의 중요성이 대두되어 연구가 가속화되고 있다. 양극해 진출과 국제적 위상제고를 위하여 극지연구소에서는 2010년부터 쇄빙연구선 "아라온"호를 이용하여 현장연구를 수행하였고 이를 통해 다양한 종류의 극지 해양 관측 자료를 획득하여 양극해 연구를 수행하고 있다. 더 나아가 양극 해양환경 웹GIS 서비스 개발을 통해 양극해에서 획득한 해양 환경정보에 대한 GIS 데이터베이스를 구축하고, 본 시스템을 통해 연구 자료의 수집, 현장관측 자료의 표준화, 연구 자료의 가시화와 공간정보도 제작 등의 기능을 구현하여 제공하고 있다. 이를 통해 극지 해양 관측 자료의 접근성을 높여 국내 연구진뿐만 아니라 전 세계 극지 해양 연구자들 간의 정보 공유를 기대할 수 있는 창구를 마련하여 극지 해양연구의 질적, 양적 성장을 기대하고 있다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.254-258
• /
• 2014

Field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. To correctly estimate ice load and ice resistance on ship's hull, It is essential to understand the material properties of sea ice during ice field trials and to perform the proper experimental procedure by gathering sea ice data. A measurement of sea ice properties was conducted during February and March of 2012 with the Korean Icebreaking research vessel "ARAON" in the Amundsen Sea, Antarctica. This paper describes a test procedure to obtain sea ice data which provide basic information to estimate ice loads and icebreaking performance of the ship. The data gathered from sea ice field trials during the 2012 Antarctic voyage of the ARAON includes ice temperature/salinity/density and the compressive/flexural strength of sea ice. This paper analyses the gathered Antarctic sea ice material properties comparing with the previous data obtained during ARAON's Arctic and Antarctic voyages in 2010.

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.254-259
• /
• 2011

The first Korean-made icebreaking research vessel "ARAON" had her second sea ice trial in the Arctic Ocean in Aug. 2010 after her first voyage to Antarctic Ocean in Jan. 2010 to gather various material and strength characteristics of sea ice. This is a detail report of ARAON 2010 summer Arctic voyage and this paper describes a standard test procedure to obtain proper sea ice data which provide basic information to estimate ice loads and icebreaking performance of the ship. The data gathered from sea ice in the Chukchi Sea and Beaufort Sea during the Arctic voyage of the ARAON includes ice temperature/salinity and the compressive/flexural strength of sea ice. This paper analyses the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.468-473
• /
• 2016

This paper focuses on the estimation of local ice loads exerted from ship-ice interaction processes. The Korean IBRV ARAON was used to perform field ice trials during her 2015 Arctic voyage. During ARAON's general ice transit, a total of 72 channels of data from both strain gauges on the inner hull plates and those installed on the transverse frames of the ARAON's bow section structures were analyzed to calculate the local ice loads. The local ice loads estimated from the analysis of the shear strain data measured on the side frames were compared to those from the hull plate pressures.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.55-61
• /
• 2011

A field trial in an ice-covered sea is one of the most important tasks in the design of icebreaking ships and offshore structures. To correctly estimate the ice load and ice resistance of a ship's hull, it is essential to understand the material properties of sea ice during ice field trials and to use the proper experimental procedure for gathering effective ice data. The first Korean-made icebreaking research vessel, "ARAON," had her second sea ice trial in the Arctic Ocean during the summer season of 2010. This paper describes the test procedures used to obtain proper sea ice data, which provides the basic information for the ship's performance in an ice-covered sea and is used to estimate the correct ice load and ice resistance of the IBRV ARAON. The data gathered from the sea ice in the Chukchi Sea and Beaufort Sea during the Arctic voyage of the ARAON includes the temperature, density, and salinity of the sea ice, which was believed to be from two-year old ice floes. This paper analyses the gathered sea ice data in comparison with data from the first voyage of the ARAON during her Antarctic Sea ice trial.

• 한국해양공학회지
• /
• 제28권1호
• /
• pp.28-33
• /
• 2014

The Korean icebreaking research vessel "Araon" performed four sea trials in the Arctic and Antarctic Seas. The ice properties, such as the ice thickness, floe size, ice strength, and power of the vessel were quite different in these trials. To compare the speeds of ship with the same ice strength and power, the AARC (Arker Arctic Research Center) method is used with a vessel power of 10 MW and an ice strength of 630 Pa in this paper. Based on the analysis results, the speed of the ship was 1.62 knots (0.83 m/s) with a 1.02-m ice thickness and 2.5-km floe size, 5.3 knots (2.73 m/s) with a 1.2-m ice thickness and 1.0-km floe size, and 13.8 knots (7.10 m/s) with a 1.1-m ice thickness and 200-m floe size. The analysis results showed that the ship speed and floe size have an inversely proportional relationship. Two reasonable reasons are given in this paper for the final result. One is an ice breaking phenomenon, and the other is the effect of the ice floe mass. For the breaking phenomenon, the ice breaking force is very small because the ice floe is not breaking but tearing when a ship is passing through a small ice floe. Regarding the effect of the ice floe mass, it is impossible for a ship to push and tear an ice floe if the mass of the ice floe is too large compared to the mass of the ship. The velocity of the ship decreases when the ice floe has a large mass and a large size because the ship has to break the ice floe to move forward.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.478-483
• /
• 2012

The speed performances of ice sea trial on the Arctic(2010 & 2011) area were shown different results depend on the ice floe size. Penetration phenomena of level ice was not happened on medium ice floe and tore up by the impact force because the mass of medium ice floe is similar to the mass of Araon which is Korean ice breaking research vessel and did not shut up by the ice ridge or iceberg. The sea trial on the Amundsen sea was performed at the big floe which is classified by WMO(World Meteorological Organization). Three measurements of ice properties and five results of speed trial were obtained with different ice thicknesses and engine powers. To evaluate speed of level ice trial and model test results at the same ice thickness and engine power, the correction method of HSVA(Hamburg Ship Model Basin) was used. The thickness, snow effect, flexural strength and friction coefficient were corrected to compare the speed of sea trial. The analyzed speed at 1.03m thickness of big floe was 5.85 knots at 10MW power and it's 6.10 knots at 1.0m ice thickness and the same power. It's bigger than the results of level ice because big floe was also slightly tore up by the impact force of vessel based on the observation of recorded video.

• 한국항해항만학회지
• /
• 제40권3호
• /
• pp.97-103
• /
• 2016

최적의 선박 운항 항로를 찾기 위해서는 선박의 정확한 추진성능을 추정하는 것이 매우 중요하다. 본 논문은 선박 최적운항시스템의 추진성능 데이터베이스를 생성하기 위한 전산프로그램의 개발에 대해 기술하고 있다. 실해역에서의 추진성능은 표류와 표면 거칠기 등 선체 상태뿐 만 아니라 파랑과 바람 등 해상 상태의 영향을 받는다. 이 부가저항 추정 방법들은 ISO 15016:2002 표준의 실선 속력시운전 해석법을 근간으로 하고 있으며, 추가로 바람과 선체 표면 거칠기에 대한 몇 가지 추정 방법이 보완되었다. 이 추정 방법들은 종합적인 전산프로그램으로 만들어졌다. 그리고 향후 최적 운항경로 계산에 활용될 쇄빙연구선 아라온 호에 대해서 데이터베이스 계산이 수행되었다. 이 프로그램은 모든 선박의 항로 최적화 계산에 유용하게 사용될 수 있을 것으로 판단된다.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.143-148
• /
• 2013

본 연구의 목적은 빙해역을 운항하는 선박의 쇄빙시 깨진 해빙에 의해 선수부 좌현 외판에 작용하는 국부 빙하중을 계측한 신호의 특성을 조사하는 것이다. 한국 최초의 쇄빙연구선인 아라온호를 이용하여 2010년 8월초 북극해에서 실선 시험을 수행하여 선수부에 설치된 변형률 게이지로부터 국부적인 빙하중에 의한 신호를 계측하였다. 국부적인 빙하중에 의한 구조 응답 특성을 반영한 계측 신호는 전형적인 유체 충격압에 대한 하중-시간 이력과 다소 다른 특성을 갖는 것도 있음이 파악되었다. 본 연구에서는 계측 신호에 대한 시간 이력을 분석하고, 무차원화된 특성값들로 나타내었다.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.88-92
• /
• 2013

The icebreaking research vessel (IBRV) ARAON had her second ice trial in the Arctic Ocean in the summer season of 2010. During the voyage, the local ice loads acting on the bow of the port side were measured using 14 strain gauges. These measurements were carried out in three icebreaking performance tests. To convert the measured strains into the local ice pressures, a finite element model of the instrumented area was developed. The influence coefficient method (ICM), which uses the influence coefficient from the finite element model, and the direct method, which uses the measured strain, were selected as the conversion methods. As a result, the maximum measured pressure was 1.236MPa, and the average difference between ICM and the direct method was about 5% for an area of $0.2m^2$. The pressure-area relationship of the measurement falls below the range of the existing pressure-area curve, which is due to the low ice strength of melted ice in the summer.