• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.832-837
• /
• 2001

In this paper, we analyzed the characteristic of the broken section for bolts fastening the generator casing, and according to the frequency analysis, we grasped the characteristic of the excited force, traced the path of the exciting source so that we examined a factor of transient vibration of the generator casing. Even if it appears transient vibration again, we applied spring washer and more tensile bolt to the casing to minimize the fracture. By solving troubles of the generator rotor, we reduced the vibration amplitude to the normal condition. So we obtain much more the reliablility of the generator.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.4
• /
• pp.223-227
• /
• 2009

The feasibility of plasma electrolytic polishing technology of stainless steel was examined. The results show that austenitic stainless steel can be polished clearly using potentiostatic regimes with various concentration of ammonium sulfate ($(NH_4)_2SO_4$) solution above certain initial temperature. The equipment and deposition produces for polishing process are described and the effect of processing parameters on the characterizations polished-samples has been investigated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.157-160
• /
• 2008

Tip clearance is a critical point in turbine to reduce friction between blade and casing. To estimate the direct effectiveness of the tip clearance, numerically analyzed are flow passing through rotors with and without tip clearance. The Results by CFX tells that rotors with tip clearance have vortex structure which makes larger loss in turbine, and shows lower total-to-total efficiency than that without tip clearance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.23-30
• /
• 2022

After drilling, reaming is required to process a workpiece for obtaining an excellent surface quality. In general, a cermet is defined as a "composite of a ceramic hard phase and metal-bonded phase." Cermets have excellent abrasion resistance, thermal resistance, and performance in finishing operations that require surface roughness and processing precision. However, although cermets have significant advantages, research on them is insufficient. In this study, workpiece SM45C was machined using drills and cermet reamers. The cermet reamer was processed for drag finishing for 0, 4, and 6 min. The experimental results showed the effects of drag finishing on surface roughness and dimensional accuracy.

• Journal of Korean Academy of Dental Administration
• /
• v.10 no.1
• /
• pp.76-83
• /
• 2022

This study was undertaken to confirm the relationship between the manner of focus and job performance of clinical dental hygienists. A survey was conducted, and the results of the survey were analyzed using multiple regression analysis. As a result, in the correlation between job performance ability and focusing manner and appreciation of the experience process, which are sub-factors of job performance ability and focusing manner, r=.161 (p<0.1) and appropriate distance r=.229 (p<0.1) indicated a positive (+) correlation. Multiple regression analysis revealed that the factors that have the greatest influence on job performance are type of workplace (β=-0.381), focusing attitude (β=0.166), marital status (β=-0.156), and age (β=0.152). Therefore, by confirming the relationship between focusing and job performance ability, we intend to provide the basic data necessary to prepare measures to improve dental hospital management and job performance.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.253-256
• /
• 2021

본 논문에서는 합성곱 신경망을 통해 학습된 DoF(피사계 심도, Depth of field) 네트워크 아키텍처를 이용하여 객체 인식, 시점 추적, 문자 인식, 비사실적 렌더링 등 다양한 애플리케이션에 적용할 수 있는 사후 필터링 기법에 대해 살펴본다. 일반적으로 영상은 포커싱과 아웃포커싱에 의해 사용자의 관심표현이 결정되며, 이를 이용하여 영상 내 중요도를 판단한다. 영상 내에는 수많은 콘텐츠들이 혼재되어 있기 때문에 사용자가 집중적으로 보고 있는 콘텐츠를 찾아내기 어렵다. 본 논문에서는 사용자가 흥미롭고 집중적으로 보고 있는 영역을 DoF 네트워크로 학습시키고, 이를 통해 이전 기법으로는 표현할 수 없었던 DoF 기반 객체 인식, 시점 추적, 문자 인식, 비사실적 렌더링을 효율적으로 표현해낸다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.183-184
• /
• 2023

스토리를 제대로 전달하려는 관점에서 제작자는 관객들이 무엇을 보게 할 것인가에 대한 고민이 필요하다. 즉, 관객의 시선을 시종일관 끌고 다녀야 한다. 그러한 관점과 더불어 관객이 일상에서 익숙한 공간감을 스크린 내에서도 확보해 줄 필요가 있다. 그러기 위해서는 영상의 깊이를 충분히 고려해야 하는데 이는 관객의 시선을 유도하는 반면에 현실 공간감을 확보하는 것이다. 스크린 내의 물체들을 자연 그대로의 원근감을 갖도록 촬영 환경을 구성하는 것도 필요하지만 스토리를 전개하는 피사체를 배경과 분리시킴으로써 자연스럽게 초점과 영점을 맞출 수 있도록 장면을 구현하는 것이다. 이를 위해서 제작(production) 단계에서는 촬영기법으로, 후반작업(post-production) 단계에서는 아웃 포커싱 등의 효과를 적용하는 방법 등이 고려될 수 있다. 본 논문에서는 영상의 깊이를 확보해야만 하는 이유와 이의 방법 등을 고찰해 본다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.119-120
• /
• 2023

Corrosion of the steel rebar in coastal environment caused huge economical loss of the globe. Therefore, coating on the steel rebar being used to mitigate the corrosion. In the present study, we have applied epoxy coating on arc thermal sprayed Al coating (a dual metal/polymeric coating) vis-à-vis compared with as coated one (Al coating). The corrosion studies were performed in simulated concrete pore solution with 3.5 wt. % NaCl solution. The morphology of the dual epoxy/Al coating is smooth while Al coating shows rankle and defects. Due to defects, Al coating is susceptible to corrosion while dual epoxy/Al coating has performed excellent compared to as coated one at extended period of immersion.

• Annual Conference of KIPS
• /
• 2024.05a
• /
• pp.798-800
• /
• 2024

현대의 머신러닝 환경에서는 특히 모바일 컴퓨팅 및 사물 인터넷(IoT)의 애플리케이션 영역에서 개인 정보를 보호하고 효율적이며 확장 가능한 모델에 대한 관심이 높아지고 있다. 본 연구는 연합 학습(FL)과 자기지도 학습(self-supervised learning)을 결합하여 이질적(heterogeneous)인 분산 자원에서 레이블이 없는 데이터를 활용하면서 사용자의 개인 정보를 보호하는 새로운 프레임워크를 소개한다. 이 프레임워크의 핵심은 SimCLR 과 같은 자기지도 학습 기법으로 학습된 공유 인코더로, 입력 데이터에서 고수준 특성을 추출하도록 설계되었다. 또한 이 구조를 통해 주석(annotation)이 없는 방대한 데이터셋을 활용하여 모델 성능을 향상시키고, 여러 개의 격리된 모델이 필요하지 않아 리소스를 크게 최적화할 수 있는 가능성을 확인했다. 본 연구를 통해 생성된 모델은 중앙 집중 방식(CL)이면서 자기지도학습으로 학습되지 않은 기존 모델과 비교하여 전체 평균 정확도가 14.488% 향상됐다.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.460-467
• /
• 2009

This research was conducted for the purpose of investigating the influence substrates addition such as germanium or Granite porphyry gravel have on the growth of foliage, on the inorganic compositions of leaves as well as on root activity, in order to discover effective means of introducing plants to the indoors. Syngonium podophyllum, Dracaena sanderiana, Epipremnum aureum and Hedera helix were used as study subjects to which soil (mixed top-soil: Sunshine Mix No. 2, USA), tap water, tap water with germanium (300g), tap water with Granite porphyry gravel (300g) were added respectively and formulated. Studies on growth variations according to substrates addition indicate that growth of Syngonium podophyllum was most sluggish under tap water only treatment. Plant growth was most active under geranium-gravel treatment. In the case of Dracaena sanderiana, treatment of substrates addition had no meaningful influence on plant growth. However, the growth of Epipremnum aureum and Hedera helix was also shown to be most active under geranium-gravel treatment. Geranium-gravel treatment was shown to be particularly beneficial for root length, number of roots and dry weight. Root activity was analyzed on ten day intervals and there was discernable difference in the root activity of all the plants according to the varying treatments. In the case of the Syngonium podophyllum, the root activity was sluggish in all three types of treatment on the 10th day but improved gradually. On the 30th to the 50th day of the experiment, the root activity was found to be best under the Granite porphyry gravel treatment. In the case of the Dracaena sanderiana, the root activity was most active under the geranium-gravel treatment from the 10th to the 40th day but deteriorated from the 50th day. However, there was no significant different in all three treatments from the 60th day onwards. Analysis of the inorganic components of the leaves indicates that, while Ca and Mg were higher in the geranium than in the Granite porphyry gravel, they do not directly influence the content of inorganic components in the leaves. The results indicate that Epipremnum aureum and Hedera helix grow better under hydro-culture than when grown in soil and growth under hydro-culture is shown to increase when germanium is added to tap water.