• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.45-54
• /
• 2011

A program aiming at predicting dynamic characteristics of a Liquid Rocket Engine(LRE) was developed and examined to trace entire LRE operation. In the startup period, transient characteristics of the propellant flows were predicted and validated with hydraulic tests data. An arrangement of each component for the pipelines was based on an operating circuit of open cycle LRE. The flow rate ratio for the gas generator and the main chamber was determined to mimic that of real open cycle LRE. Individual component modeling at its transient was completed and was integrated into the system prediction program. Essential parameters of the component dynamic characteristics were examined in an integrated fashion.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.7-10
• /
• 2011

최근 국제우주정거장에서 화재안전에 관한 중요성의 인식으로 화재의 감지/소화의 메커니즘을 구체적으로 이해하기 위한 다양한 연구들이 시도되고 있다. 본 연구에서는 국제우주정거장에서 각종 실험과 연구를 진행하는 가압모듈을 대상으로 환기, 연기거동 및 감지에 관한 수치모델링을 수행하였다. 수치모델링은 NIST에서 개발된 FDS (Fire Dynamic Simulator)가 사용되었다. 국제우주정거장 내부는 마이크로중력환경으로 부력이 존재하지 않아 화재 발생 시 화염 및 연기거동은 지상에서의 현상들과 큰 차이를 보이게 된다. 따라서 현재 가압모듈에서 적용되고 있는 환기조건의 변화에 따른 연기거동 및 감지특성에 대한 연구는 향후 국내의 국제 우주정거장 실험 참여를 위한 기초적인 정보를 제공할 것으로 기대된다.

• The Journal of Information Technology
• /
• v.7 no.3
• /
• pp.1-10
• /
• 2004

Considerable efforts has been recently devoted to the determination of accurate channel models for the Power Line environment, both for the indoor and outdoor cases. The common denominator and limitation of the known and previously published models is the particular type of approach followed. In this paper is concerned with a power line channel modeling for the more fast and efficiently power line communication experiment. A capacitor load channel simulator is a essential equipment in the power line modem development for indoor network. We accomplished a channel modelling by the frequency response method about the total 224 capacitor load cases. On the basis of this measurement modeling it is here revealed that the PLC is a more deterministic media that commonly believed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2008

A dynamic model for II-SEPIC(Isolated Inverse-SEPIC) is developed based on the state-space averaging method and its control characteristics are investigated in this paper. Equations for circuit design of II-SEPIC are derived through steady state analysis and the resulted circuit parameters are used in the consequent simulation and experiment works. A structure of control system is devised to obtain better control performance. In order to verify validity and effectiveness of the design equations and dynamic model derived, dynamic control responses of II-SEPIC system against line and load variation are illustrated in both simulation and experiment.

• KIISE Transactions on Computing Practices
• /
• v.21 no.7
• /
• pp.443-451
• /
• 2015

This paper proposes a signal modelling method that can effectively detect the shock wave(SW) sound and muzzle blast(MB) sound from the gunshot of a small arm rifle. In order to localize a counter sniper in battlefield, an accurate detection of both shock wave sound and muzzle blast sound are the necessary keys in estimating the direction and the distance of the counter sniper. To verify the performance of the proposed algorithm, a real gunshot sound in a domestic military shooting range was recorded and analyzed. From the experimental results, the proposed signal modelling method was found to be superior to the comparative system more than 20% in a shock wave detection and 5% in a muzzle blast detection, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.161-168
• /
• 2010

Practicing engineers and researchers need computational tools that estimate accurately the cyclic response of RC walls, and in particular, force and deformation capacities and their materials strains. So this paper describes a nonlinear truss modeling approach for reinforced concrete walls, or in general, for plane stress reinforced concrete elements subjected to cyclic reversals. Nonlinear vertical, horizontal, and diagonal truss elements are used to represent concrete and steel reinforcement. The wall having aspect ratio of 1.2 was chosen to be compared with the experimental results. Here, four types of main diagonal member models and three types of diagonal members models were applied to find out more accurate results of analysis.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.333-340
• /
• 2008

For the indoor spatial modeling by terrestrial LiDAR and the analyzing its positional accuracy result, two terrestrial LiDARs which have different specification each other were used at test site. This paper shows disparity of accuracy between (1) the structural coordinate transformation by point cloud unit using control points and (2) the relative registration among all point cloud units then structural coordinate transformation in bulk, under condition of limited number of control points. As results, the latter had smaller size and distribution of errors than the former although different specifications and acquistion methods are used.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1003-1014
• /
• 2019

In this paper, we modeled the devices used easily in PV system circuits. Simulation tools use PSPICE to enable intuitive electrical circuit simulations. Simulations were also performed on the effects of temperature and spatial radiation that are easy to overlook when using solar cells using modelled libraries. In addition, for full operation of the photovoltaic system, a complete operation system for the DC-DC buck-boost converter and the MPPT(Maximum Power Point Tracking) control system was modeled and simulated to confirm good operation. In order to verify the operation of the simulation, we constructed an actual system with the same conditions in the simulation and experimented. As a result, we proposed a single-phase 3 kW grid-connected solar power converter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.265-267
• /
• 2019

In this paper, we propose a method to automatically generate gray images similar to existing images using genetic algorithms. We have proposed two techniques for gene modeling, which is the most important design element to apply genetic algorithm to real field problems. Experiments were performed on two different sizes of gray images using each of the proposed techniques. Experimental results show that there is a large difference in the evolutionary performance of each technique in gene modeling for image generation. Therefore, it can be understood that gene modeling should be carefully decided in order to generate an image similar to the existing image in the future, or to learn quickly and naturally to generate an image synthesized from different images.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.368-371
• /
• 2020

반도체 제조시설의 효율성을 위해 대부분의 현장에서는 물류 자동화 시스템 (AMHS, Automated Material Handling System)을 도입하여 운영하고 있다. OHT(Overhead Hoist Transfer)는 반도체 공정에서 주로 활용되는 Monorail 컨베이어 형태의 자동 반송 시스템의 일종으로 작업물을 들고 제조라인 위에 설치된 레일을 따라 자율적으로 이동하는 방식으로 운영된다. 도체 물류 시스템의 계층적인 구조적 특징과 고가의 재료를 다루고, 외부유출이 어려운 실제 공정 현장, 실험 환경의 시간, 공간적 구축 등의 현실적 특징 때문에 반도체 제조 공정의 자동화 물류시스템에 대한 모델링 및 시뮬레이션을 통한 연구의 필요성이 대두되고 있다. 본 논문에서는 OHT를 효율적으로 제어하기 위해 DEVS(Discrete Event System Specifications) 형식론을 기반으로 OHT 시스템 모델링 및 시뮬레이션 설계 방법을 제안한다. 이를 위해 반도체 제조 시스템의 전반적인 물류 과정에 대해 분석하고, DEVS 형식론에 대해 연구하며, 이를 바탕으로 반도체 물류 시스템을 위한 모델링 및 시뮬레이션을 설계하였으면, 실험을 통해 제안된 모델리 반도체 물류 시스템 시뮬레이션을 수행할 수 있음을 보인다.