• Design Convergence Study
• /
• v.16 no.6
• /
• pp.123-135
• /
• 2017

In recent mobile health care service, health management using number of steps is becoming popular. In addition, a variety of activity trackers have made it possible to measure the number of steps more accurately and easily. Nevertheless, the activity tracker is not popularized, and it is a trend to use the pedometer sensor of the smartphone as an alternative. In this study, we tried to find out how much the number of steps collected by the smartphone versus the actual number of steps in actual situations, and what factors make the difference. We conducted an experiment to collect number of steps data of 21 people using the smartphone and wearable device simultaneously for 7 days. As a result, we found that the average number of steps of the smartphone is 62% compared to the actual number of steps, and that there is a large variation among users. We derived a regression model in which the accuracy of smartphone increases with the degree of awareness of smartphone. We expect that this can be used as a factor to correct the difference from the actual number of steps in the smartphone alone healthcare service.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.17-17
• /
• 2020

일반적인 연안 해역에서 창조지속시간과 낙조지속시간은 거의 동일한 수준을 보여 조위곡선은 대칭적인 형태를 띠게 된다. 그러나 M4분조나 MS4분조와 같은 천해조가 발달된 해역에서는 그 모체가 되는 M2분조나 S2분조와의 상대적인 위상차에 따라 조위곡선이 비대칭적인 형상을 띠기도 한다. 창조지속시간이 길 경우 낙조시 최대조류속이 크게 되는 낙조우세가 형성되는 반면 낙조지속시간이 길 경우에는 반대로 창조우세가 형성된다. 소류사의 움직임은 유속의 6승에까지 비례하므로 이러한 최대조류속 차이에 따라 창조우세 또는 낙조우세 해역에서 소류사 이동량에는 큰 차이가 발생할 수 있다. 감조하천의 경우 상류로 갈수록 창조우세화하는 것이 일반적인 것으로 알려져 있으며 국내에서는 금강을 비롯한 군산해역이 대표적이다. 창조우세인 군산해역과 반대로 영산강하구 및 목포해역의 경우 낙조우세를 보이고 있는데, 그 근원은 황해에서의 순환특성과 함께 목포해역 인근의 드넓은 조간대에 기인하는 것으로 추정하고 있다. 특히 인접한 무안만에서는 낙조지속시간이 창조지속시간에 비해 2시간 이상 짧아 국내에서 가장 심한 수준의 낙조우세를 보이고 있으며, 영산강하구 낙조우세의 근원으로 평가되고 있다. 한편 조간대가 발달된 해역은 천해조 생성에 따라 낙조우세 경향이 있음과 관련하여 Kang and Moon(2001)은 조간대가 조석파의 전파와 천해조 발생에 미치는 영향성에 대하여 수치실험을 통해 연구한 결과 무안만의 낙조우세는 조간대의 발달에 기인함을 재확인한 바 있다. 따라서 낙조 우세를 수치모형을 통해 재현하기 위해서는 조간대 모의가 필수적임과 동시에 낙조우세를 재현하기 위해서는 천해조 개방경계 설정이 필요하다고 알려져 있다. 또한 이렇게 천해조가 발달된 하구에서 조석비대칭 현상은 퇴적물 이동에 직접적인 영향을 미치게 되는데 Kang et al.(2002)은 소류사 및 부유사 이동에서 이러한 영향성에 대한 연구를 수행한 바 있다. 그 결과 천해조가 발달된 이러한 해역에서 퇴적물 이동과 관련된 수치모의시 M2분조와 같은 천문조 경계조건에 부가하여 M4분조의 천해조까지 포함시킬 것을 제안한 바 있다. 이와 같이 하구역에서는 천해조 발달로 인해 조석비대칭이 두드러지게 발달되어 있는 경우가 많으며, 감조하천 상류로 갈수록 비대칭은 더욱 심화되는 경향이 있다. 따라서 감조하천 하류부에서 조석을 고려한 경계조건을 부여하여 하천의 흐름양상을 수치적으로 모의할 경우 천해조가 발달된 하구역에서는 천해조가 포함된 경계조건은 필수적이라 할 수 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2009

When a rock slope is excavated adjacent to a existing tunnel, the behavior of the existing tunnel in the jointed rock masses is greatly influenced by the joint conditions and slope status. In this study, the effects of joint dip and slope angle close to a tunnel are investigated through a large scale model using a biaxial test equipment ($3.1\;m\;{\times}\;3.1\;m\;{\times}\;0.50\;m$ (width $\times$ height $\times$ length)). The jointed rock masses were built by concrete blocks. The diameter of the modeled tunnel is 0.6 m and the dip angles of joint vary in the range of $0-90^{\circ}$. In addition, the excavated slope angle varies within $30{\sim}90^{\circ}$. Deformational behaviors of the tunnel were analyzed in consideration of joint dip and slope angle. With increase of the joint dip and slope angle, the magnitude of tunnel distortion and the moment of tunnel lining were increased. Rock mass displacement in horizontal was also dependent on the joint dip and the excavated slope angle, which indicated the optimal slope reinforcement for a specific rock mass conditions.

• Korean Journal of Animal Reproduction
• /
• v.18 no.4
• /
• pp.265-274
• /
• 1995

가토 20마리의 혈액중 혈소판의 수를 수정 전후로 조사한 결과, 수정전과 비교하여 수정후 1일부터 유의하게 감소하였으며 (26.84%, P<0.01), 이러한 감소는 수정후 5일까지 계속되었다. 수정후 5일동안 혈소판의 감소율과 혈소판의 최저치를 수정란의 수와 비교한 바, 이들간의 유의한 상관관계(r=0.5032)가 있었다. 가토수정란 (2세포기) 각각 30∼40개를 5마리의 비장적출수란가토의 난관에 이식한 다음, 혈소판수의 변화를 조사한 결과, 이식전에 비해 이식후 90분 (P<0.025)과 135∼270분 (P<0.025)에 유의한 감소를 확인하였따. 특히 수정란 이식후 180분경에 가장 크게 감소하였다 (P<0.001). 60∼70개의 2세포기 가토수정란을 24시간 배양한 다음, 배양액을 3마리의 비장적출가토에 주사한 후 혈소판의 변화를 조사하였을 때, 주사후 120분경부터 혈소판의 수가 유의하게 감소하기 시작하였다. 이들 배양액을 동결, 해동한 다음 주사한 실험에서도 유사한 결가를 얻었다. 또한 이 배양액을 비장적출생쥐에 주사한 경우에도 가토에서와 마찬가지의 혈소판 촉진현상이 나타났다. 혈소판 촉진인자(PAF)의 길항제인 kadsurenone이 첨가된 배양액에서 24시간동안 가토수정란을 배양한 다음, 이 배양액을 4마리의 비장적출생쥐에 주사한 결과, 혈소판수의 변화가 일어나지 않았다. 또한 kadsurenone이 첨가된 배양액에서는 2세포기 가토수정란의 상실기와 배반포기까지 발달율은 각각 4와 7%로 대조구의 7과 49%보다 유의하게 낮았다. 따라서 본 연구에서 가토의 초기배는 가토나 생쥐의 혈소판수를 감소시키고, 특히 길항제 처리는 이러한 혈소판 감소현상을 억제시킬 뿐만 아니라 가토 초기배발달을 억제한다는 것을 확인하였다. 결론적으로 가토초기배에서는 PAF 또는 수정란 유래의 PAF가 분비된다는 것을 알 수 있었으며, 이러한 인자는 동결처리에서도 그 기능은 전혀 변하지 않는다고 본다. 이후에 있어서 mouse LIF의 첨가는 돼지의 수정란을 배반포 이후의 단계에까지 발달시킬 수 있었다. 있어서 더 적합한 것으로 판단되었다. 5. 개발된 모형은 논 관개의 물리적 측면과 관리목표 모두를 고려한 것으로 계산된 효율은 벼, 생육 각 단계에서의 효율 비교에 양호한 방법임을 알 수 있다.은 Sharpsburg 점질양토에 대한 S.C.S 한계허용치 10ton/ha/year 이내로 나타났다. 비처리구에서의 토양유실량은 평균 2.56ton/ha/year로 높게 나타난 반면 3개의 서로 다른 추리구인 비수구, 초생수로구 및 Bromegrass구에서는 각각 0.152, 0.192 및 0.290ton/ha/year로 낮은 결과를 가져왔다. 6. 평균 침전량에 대한 L.S.D. 검정 걸과 전시험구중 비처리구가 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group". And the issues were high risk perception in general

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.233-241
• /
• 2022

Purpose: The purpose of this study was to assess the dimensional change of 3D-printed dentures after post-curing. Materials and Methods: The upper and lower dentures were designed in Exocad DentalCAD software and exported as STL files. The upper and lower dentures were printed from 10 STL files using a DLP-type dental 3D printer. The printed upper and lower dentures were cleaned, and a scan file was created using a model scanner before and after post-curing. The dimensional change was evaluated by superimposing the scanned denture files before and after post-curing and measuring the distance between measurement points on the denture. SPSS was used for statistics, and the level of significance was 5%. Results: The maxillary denture reduced in size during post-curing, with the most notable color change occurring in the posterior palatal region. The reduction in anteroposterior maxillary denture length (A-D, A-E, A-F), as well as the distance between the first molars on both sides (B-C), was statistically significant. After post-curing, the mandibular denture showed more noticeable color change in the posteriorly buccal and lingual region. The decrease of length on the posterior (A-M, A-D, A-E, A-L, A-H, A-I, H-I) and lingual (J-K, L-M) sides of the denture were statistically significant. Conclusion: There was significant dimensional change in both the length and width of the 3D-printed maxillary and mandibular dentures after post-curing in this experiment. Consequently, it is seemed necessary to develop post-curing techniques and materials that reduce such denture deformation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.507-515
• /
• 2008

In this study, a method predicting the displacement response of structures from the measured dynamic strain signal is proposed by using mode decomposition technique. Evaluation of bridge stability is normally focused on the bridge completed. However, dynamic loadings including wind and seismic loadings could be exerted to the bridge under construction. In order to examine the bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. Because it may be not easy for the displacement response to be acquired directly on site, an indirect method to predict the displacement response is needed. Thus, as an alternative for predicting the displacement response indirectly, the conversion of the measured strain signal into the displacement response is suggested, while the measured strain signal can be obtained using fiber optic Bragg-grating (FBG) sensors. As previous studies on the prediction of displacement response by using the FBG sensors, the static displacement has been mainly predicted. For predicting the dynamic displacement, it has been known that the measured strain signal includes higher modes and then the predicted dynamic displacement can be inherently contaminated by broad-band noises. To overcome such problem, a mode decomposition technique was used. Mode decomposition technique estimates the displacement response of each mode with mode shape estimated to use POD from strain signal and with the measured strain signal decomposed into mode by EMD. This is a method estimating the total displacement response combined with the each displacement response about the major mode of the structure. In order to examine the mode decomposition technique suggested in this study model experiment was performed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.641-649
• /
• 2006

The behavior of a three-dimensional pure rectangular water jet with aspect ratio of 10 was experimentally investigated based on the results of the mean velocity field obtained by PIV. The saddle back distribution was observed in the lateral distribution along the major axis. The theoretical centerline velocity equation derived from the point source concept using the spreading rate for the axisymmetric jet was in good agreement with the measured centerline velocity and gave the division of the potential core region, two-dimensional region, and axisymmetric region. The range of the two-dimensional region divided by the criterion of the theoretical centerline velocity decay for the aspect ratio of 10 was observed to be smaller than that of the transition region. The applicability of the two-dimensional model to the behavior of the rectangular jet with low aspect ratio or the wastewater discharged from a multiport diffuser in the deep water of real ocean may result in significant error in the transition and axisymmetric regions after the two-dimensional region. In the two-dimensional region, the Gaussian constant tended to be conserved, and the spreading rate slightly decreased at the end of the two-dimensional region. The normalized turbulent intensity along the centerline of the jet initially abruptly increased and showed relatively higher intensity for higher Reynolds number.

• Journal of Industrial Convergence
• /
• v.21 no.8
• /
• pp.1-12
• /
• 2023

The purpose of the study is to analyze the impact of blended learning's external classroom formats and internal teaching strategies, which has been implemented in university classes due to COVID-19, on students' academic achievement and learners' perceptions, as well as to provide insights into the desirable direction of online education. The study was conducted during the 1st semester of 2022 at G University, targeting students taking Calculus I. The experimental group consisted of 117 students, while the control group consisted of 707 students. Blended learning, involving a combination of face-to-face classes, online classes, and mixed teaching methods, was implemented, and academic achievement and learner perceptions were assessed. The research findings indicate that compared to solely online classes, adopting a blended learning approach with online classes before the midterm and face-to-face classes afterwards resulted in a decline in academic achievement. The unprepared and simplistic external format of blended learning was found to be ineffective, however, a blended learning model consisting solely of online classes, incorporating a mix of asynchronous and synchronous instruction, demonstrated positive learner perceptions. Additionally, utilizing technology in the teaching strategies yielded positive outcome.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.7-22
• /
• 2023

In January 2022, a new legislation was enforced to enhance the safety of underground construction. Consequently, a comprehensive assessment of underground safety is now an integral part of the planning process, including an evaluation of its impact. Ensuring the stability of temporary retaining walls during underground excavation has become paramount, prompting a heightened focus on the assessment of underground safety. This study delves into the analysis of the Multi-axis Flat Continuous Soil Cement Wall retaining wall (MFS) construction method. This method facilitates the expansion of wall thickness in the ground and provides flexibility in selecting and spacing H-piles. Through laboratory model tests, we scrutinized the load-displacement behavior of the wall, varying the H-pile installation intervals using the MFS method. Additionally, a 3-dimensional numerical analysis was conducted to explore the influence of H-pile installation intervals and sizes on the load for different thicknesses of the MFS retaining wall. The displacement analysis yielded the calculation of the height of the arching effect acting on the wall. To further our understanding, a design method was introduced, quantitatively analyzing the results of axial force and shear force acting on the wall. This involved applying the maximum arching height, calculated by the MFS method, to the existing member force review method. The axial force and shear force, contingent on the H-pile installation interval and size applied to the MFS retaining wall, demonstrated a reduction effect ranging from 24.6% to 62.9%.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.119-125
• /
• 2023

Through the Ukraine-Russia war, the military importance of drones is being reassessed, and North Korea has completed actual verification through a drone provocation towards South Korea at 2022. Furthermore, North Korea is actively integrating artificial intelligence (AI) technology into drones, highlighting the increasing threat posed by drones. In response, the Republic of Korea military has established Drone Operations Command(DOC) and implemented various drone defense systems. However, there is a concern that the efforts to enhance capabilities are disproportionately focused on striking systems, making it challenging to effectively counter swarm drone attacks. Particularly, Air Force bases located adjacent to urban areas face significant limitations in the use of traditional air defense weapons due to concerns about civilian casualties. Therefore, this study proposes a new passive air defense method that aims at disrupting the object detection capabilities of AI models to enhance the survivability of friendly aircraft against the threat posed by AI based swarm drones. Using laser-based adversarial examples, the study seeks to degrade the recognition accuracy of object recognition AI installed on enemy drones. Experimental results using synthetic images and precision-reduced models confirmed that the proposed method decreased the recognition accuracy of object recognition AI, which was initially approximately 95%, to around 0-15% after the application of the proposed method, thereby validating the effectiveness of the proposed method.