• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.501-511
• /
• 2015

This study suggests a method of alleviating global warming by the increase of the Earth surface albedo through Artificial Sea ice Increasing (ASI) over the Available Freezing Areas (AFA). The method is developed based on the fact that the large sea surface area in or near the Arctic and the Antarctic has no ice even though both water and air temperatures are below zero and the artificial sea ice generation is thus available. The mean energy of $0.85Wm^{-2}$, which was suspected of adding to the earth by the global warming effect was calculated to offset at once when the sea ice area about $4.09{\times}10^6km^2$ was additionally increased. In addition, three techniques for producing ice plates on the sea surface (using ships, installation apparatus, and floating matter such as Green Cell Foam) for ASI were proposed. According to the result of simple analysis using the energy balance model, when ASI was maximally operated only for 3 months (September, October, and November) over AFA, it is expected that the annual mean temperature of earth surface would be decreased about $0.11^{\circ}C$ in the following year. On the other hand, in case of generating the artificial sea ice in all four seasons, a risk of triggering snowball earth was detected.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.640-653
• /
• 2011

We simulate the propagation of earthquake waves in the continental margin of Antarctica using the elastic wave modeling algorithm, which is modified to be suitable for acoustic-elastic coupled media and earthquake source. To simulate the various types of earthquake source, the staggered-grid finite-difference method, which is composed of velocity-stress formulae, can be more appropriate to use than the conventional, displacement-based, finite-difference method. We simulate the elastic wave propagation generated by earthquakes combining 3D staggered-grid finite-difference algorithm composed of displacement-velocity-stress formulae with double couple mechanisms for earthquake source. Through numerical tests for left-lateral strike-slip fault, normal fault and reverse fault, we could confirm that the first arrival of P waves at the surface is in a good agreement with the theoretically-predicted results based on the focal mechanism of an earthquake. Numerical results for a model made after the subduction zone in the continental margin of Antarctica showed that earthquake waves, generated by the reverse fault and propagating through the continental crust, the oceanic crust and the ocean, are accurately described.

• Journal of The Korean Association For Science Education
• /
• v.32 no.5
• /
• pp.823-840
• /
• 2012

The importance of teaching the nature of science (NOS) has been emphasized in the science curriculum, especially in the science curriculum for science-gifted students. Nevertheless, few studies concerning the structure and formation of students' mental model on NOS have been carried out. This study aimed to explore science-gifted students' understanding of 'fact', 'hypothesis', 'theory', 'law', and 'scientificness' by utilizing semantic network analysis. One hundred ten science-gifted middle school students who were selected by a national university participated in this study. We collected students' written responses of five items and analyzed them by the semantic network analysis(SNA) method. As a result, the core ideas of students' understanding of 'fact' were proof and reality, of 'hypothesis' were tentativeness and uncertainty, of 'theory' was proven hypothesis by experimentation, of 'law' were absoluteness and authority, and of 'scientificness' were factual evidence, verifiability, accurate and logical theoretical framework. The result of integrated semantic network illustrated that the viewpoint of science-gifted students were similar to absolutism and logical positivism (empiricism). Methodologically, this study showed that the semantic network analysis method was an useful tool for visualization of students' mental model of scientific conceptions including NOS.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.277-284
• /
• 1998

The purpose of this study was to evaluate the propriety of making use of the light-cured resin base in indirect bracket bonding technique by study of shear bond strength and failure patterns according to the material of resin base. Metal brackets were bonded to the stone models of specimens involving bovine lower incisor with chemical-cured(Excel), light-cured(Light-Bond) and thermal-cured(Therma-Cure) resin. They were transferred to the specimens and bonded using sealant. The shear bond strength was tested on Instron. After bracket removal, the bracket base was examined and assessed with the adhesive remnant index(ARI). The results were as follows : 1. No significant differences in shear bond strength were found among the three groups (P>0.05). 2. No significant differences in ARI score were found among the three groups (P>0.05). The above results suggest that light-cured resin base in addition to chemical-cured and thermal-cured resin bases is useful in the indirect bonding technique.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.2
• /
• pp.1-13
• /
• 2018

This work discusses the major roles of digital technologies in the history of landscape architectural drawing, and offers a critique of the dominant trend towards realism in recent digital landscape representations. During the period of transition from conventional drawing tools, computer technologies generally functioned as mechanical tools to imitate prior manual techniques. Specifically, the GIS was served as a mechanical tool to efficiently process the manual layer cake; CAD software generally functioned to translate physical models to two-dimensional construction documents while graphic software generally functioned as a tool to perform processes similar to those of manual collage and montage techniques. Recent digital landscape drawings tend to adopt a realistic depiction like the painting of landscape appearance. In the representations, discernible traces of cutting and assembling are removed via graphic software; thus, the complete representations are perceived as if they were a copy of an actual landscape. The realistic images are an easy way to communicate with the public. However, it is difficult to achieve a full embodiment of all of the multisensory characteristics of a landscape through these visuals. They often deceive viewers by visualizing idealized conditions of not-yet-actualized landscapes and production of the final images takes up a large portion of the overall design process. Alternatively, 3D digital modeling of landscape performance and creative uses of digital technologies during the overall design process, as well as hybridized techniques with different drawing techniques and technologies, provide the opportunity to explore various aspects of a landscape.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.10
• /
• pp.35-41
• /
• 2018

Dynamic interaction of the ground-foundation-structure must be considered for safety of earthquake resistant design for piles supported structures. The p-y curve, which is proposed in the static load and cyclic load cases, is used for the earthquake resistant design of piles. The p-y curve does not consider dynamic interaction of the ground-foundation-structure on dynamic load cases such as earthquake. Therefore, it is difficult to apply the p-y curve to earthquake resistant design. The dynamic p-y curve by considering dynamic interaction of the ground-foundation-structure has been studied, and researches had same conditions that pile caps were on the ground surface and superstructures were added on pile caps for the simple weight. However, group piles are normally embedded into the ground except for marine structures, so it seems that the embedding the pile cap influences on the dynamic p-y curve of group piles. In this study, the shaking table model test was conducted to confirm dynamic behavior of group piles by the embedded pile cap in the ground. The result showed that dynamic behavior was different between two cases by embedding the pile cap or not.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.238-243
• /
• 2011

In this study, we attempted a structural analysis in order to design a balloon type extracorporeal membrane oxygenator that can induce blood flow without using blood pumps for the purpose of complementing the weakness in the existing extracorporeal membrane oxygenator. To analyze the flow characteristic of the blood flow within the virtual model of extracorporeal membrane oxygenator, computational fluid dynamics(CFD) modeling method was used. The operating principle of this system is to make the surface of the extracorporeal membrane oxygenator keep contracting and dilating regularly by applying pressure load using a balloon, and the 'ime Function Value'that changes according to the time was applied by calculating a half cycle of sine waveform and a cycle of sine.waveform Under the assumption that the uni-directional blood flow could be induced if the balloon type extracorporeal membrane oxygenator was designed as per the method described above, we conducted a structural analysis accordingly. We measured and analyzed the velocity and pressure of blood flow at both inlet and outlet of the extracorporeal membrane oxygenator through CFD simulation. As a result of the modeling, it was confirmed that there was a flow in accord with the direction of the blood by the contraction/dilation. With CFD simulation, the characteristics of blood flow can be predicted in advance, so it is judged that this will be able to provide the most optimized design in producing an extracorporeal membrane oxygenator.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.611-623
• /
• 2005

The purpose of this study is to explore the effects of self-directed field learning practices on student’s academic achievement and self-directed learning characteristics regarding the level of learning ability. To conduct this study, 196 students of high school students in Busan were chosen and parted into either the experimental group (98 students) or control group (98 students). Each group is classified into three categories: high level (24 students), middle level (50 students), and low level (24 students) according to the level of learning ability by the academic achievement pre-test. The areas chosen for experimenting this study range from Dusong peninsula, Molundae in Saha-gu, Songdo in Seo-gu, Pusan. Then the inquiry-model of self-directed field learning which focuses on learner-centered activity was designed based on theories concerning field learning and self-directed learning, and was applied to the experimental group. In conclusion, this teaching method using self-directed field learning is expected to improve academic achievement in science subject and increase students’ self-directed learning characteristics regardless of the students' level of academic achievement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.47-57
• /
• 2010

An undisturbed healing process without micromotion at the implant-bone interface is essential for achievement of osseointegration of dental implant. Therefore, initial stability was advocated as prerequisite for successful clinical outcome. Adequate bone quality and quantity were important to achieve initial stability and to prevent early failures. However there were few published data available regarding the effect of design change in implant geometry on initial stability of the implants. The purpose of the current study was to assess the initial stability of various designs of implants when placed into artificial bone materials of varying qualities and shapes of insertion holes. Within the scope of this study, the following results were drawn. Bone quality was major importance to achieve initial stability. Initial stability was higher on GS II which had additional design feature of double thread. With a tapered design of implant such as GS III showed a higher initial stability than straight one. An insertion hole with the similar shape of implant would lead to reduce a compression force on cortical bone and enhance a bone anchorage on cancellous bone.

• Korean journal of applied entomology
• /
• v.39 no.4
• /
• pp.275-279
• /
• 2000

Development of Bracon hebetor Say parasitizing Indianmeal moth (Plodia interpunctella (Hubner) was studied at five temperature conditions (17, 20, 25, 28 and 32$\pm$0.5$^{\circ}C$) under a photoperiod of 16 : 8 (L : D). Developmental period (mean$\pm$s.e.) of B. hebetor from egg to eclosion decreased from 28.6$\pm$0.50 to 9.3 $\pm$0.09 days and 28.1 $\pm$0.51 to 9.2$\pm$0.09 days for female and male, respectively, as the temperature increased from 17 to $32^{\circ}C$. The combination model provided a good description of the relationship between temperature and development. The low temperature thresholds were estimated to be 14.0, 12.8, 15.1$^{\circ}C$ for development of egg, larva and pupa. The thresholds for normal development (outside of the boundary layer of the development) were 14.0, 17.5, $15.1^{\circ}C$ for egg, larva and pupa, respectively, indicating that the larval stage is more sensitive to the low temperature than the other stages. The results suggested that the present B. hebetor population could be another ecological race adapting to the seasonal temperature conditions of this area.