• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.5
• /
• pp.295-300
• /
• 2024

In this paper, a damage detection and quantification method for sandwich composites using matching pursuit decomposition (MPD) is presented. Sandwich composites with and without delamination were fabricated using the hand lay-up and hot-press methods, and the location and size of delamination were confirmed using flash thermography. An ultrasonic wave propagation experiment using the pitch-catch method was set up to collect data from healthy and damaged samples. The acquired signals were estimated and decomposed using MPD and compared with signals denoised using fast Fourier and wavelet transforms. The denoised signals were trained by a 1-D CNN model with the same number of layers and filters. The proposed method showed improved accuracy and stability than the traditional method. In addition, more reliable mode separation in the time-frequency representation could be confirmed, extending the possibility of MPD-based signal preprocessing in deep learning training.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.288-293
• /
• 2004

Purpose: increased uptake of wrist and hand joints in three phase bone scintigraphy (TPBS) have been used in the detection of reflex sympathetic dystrophy syndrome (RSDS). TPBS frequently shows increased shoulder uptake in the hemiplegic RSDS patients. We investigated the significance of the shoulder uptake in the detection of these patients. Materials and Methods: Twenty three patients who had hemiplegia due to brain stroke and diagnosed as RSD were enrolled in this study (M:F=16:7, R:L=11:12). The mean age was $63{\pm}10$ yrs. Ter normal volunteer (mean age: $60{\pm}5$, M:F=1:9) data was used as control group. TPBS was performed $59{\pm}32$ days after stoke (acute stage). We obtained the count ratios of bilateral hands by drawing a region of interest (ROI) in three phase images and compared to the count ratios of shoulders in the delayed image. Hand ROI included an ipsilateral wrist. Sensitivity of detecting the affected limb was defined using the right/left count ratio of normal control. Results: Sensitivities using count ratios of hand blood flow, blood pool and delayed image were 45%, 76% and 78%, respectively. Sensitivity of shoulder count ratio was 74%. Log of right/left counts of hand delayed image and that of shoulder delayed image were correlated well with statistical significance (Spearman's R=0.824, p<0.001). Conclusion: Shoulder uptake showed good correlation with hand uptake in the delayed image of TPBS. Shoulder uptake maybe helpful in the diagnosis of reflex sympathetic dystrophy syndrome in patients with hemiplegia.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.8
• /
• pp.367-376
• /
• 2007

In this paper, we introduce an application-specific and adaptive power management technique for portable systems that support dynamic voltage scaling (DVS). We exploit both the idle time of multitasking systems running soft real-time tasks as well as memory- or CPU-bound code regions. Detailed power and execution time profiles guide an adaptive power manager (APM) that is linked to the operating system. A post-pass optimizer marks candidate regions for DVS by inserting calls to the APM. At runtime, the APM monitors the CPU's performance counters to dynamically determine the affinity of the each marked region. for each region, the APM computes the optimal voltage and frequency setting in terms of energy consumption and switches the CPU to that setting during the execution of the region. Idle time is exploited by monitoring system idle time and switching to the energy-wise most economical setting without prolonging execution. We show that our method is most effective for periodic workloads such as video or audio decoding. We have implemented our method in a multitasking operating system (Microsoft Windows CE) running on an Intel XScale-processor. We achieved up to 9% of total system power savings over the standard power management policy that puts the CPU in a low Power mode during idle periods.

• Journal of Science Education
• /
• v.40 no.3
• /
• pp.267-286
• /
• 2016

The study aimed to investigate a research trend in science gifted education of six years from 2010 to 2015 by utilizing literature analysis and Social Network Analysis (SNA) methods. In this study, 275 papers published in eight major academic journals of science education and gifted education were selected as research subjects. First, through the literature analysis, it was found that the most frequent research topics were cognitive characteristics (25.8%), curriculum/programs (22.6%), and social and emotional characteristics (20.2%). For the research method employed in research papers, the survey research (46.5%) was appeared as the most frequently employed method, and followed by experimental (18.8%), program development (10.6%), correlation (10.3%), and qualitative (6.4%) research methods. The most frequent research subject was appeared as middle school students (33.7%) and followed by elementary school (30.6%), and high school (12.7%) students. Second, the SNA method was utilized for producing keyword frequency, degree centrality and network analyses. It was appeared that the most common keywords over six years included 'science gifted', 'gifted education', and 'creativity' and frequent keywords were science gifted, gifted education, gifted, creativity, science inquiry, perception, (creative) problem solving, science high school, scientific attitude, and STEAM. Third, through 2-mode network analysis, it was found that the research papers about cognitive characteristics were mainly related to perceptions, thinking ability, scientific argumentation, science inquiry and so on. It was also found that the research papers about social and emotional characteristics were related to correlation, motivation, creativity-character, self-efficiency and so on. It was concluded that the SNA method can be performed with literature analysis together for better understandings and interpretations of the research trend of science gifted education in-depth.

• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.485-492
• /
• 2011

Sorption of cyanide on granular activated carbon and attenuation of the cyanide by UV-light over a wide range of conditions such as pH and concentration were investigated through batch experiments. Cyanide uptake by activated carbon is much effective at $[CN]_{ini}$ < 2 mg/L. The sorption of cyanide on activated carbon at pH 7.0 is greater than that of pH 9.0. It is found that the ratio of CN uptake to CN in solution increases at pH 9.0 whereas at pH 7.0 the ratio decreases, suggesting that reactivity of activated carbon increases as a function of pH. The sorption of cyanide rapidly increases during the first 30 min, followed by sharp desorption until 3hr, and then the sorption increases and reaches the maximum sorption during the duration of experiments, implying that the sorption mode could be changed through conformational change during the initial stage of the cyanide uptake by activated carbon. Total amount of cyanide desorbed from the activated carbon during the period of desorption experiments is less than 1.5% of total sorbed cyanide, indicative of strong and stable sorption of cyanide on the activated carbon. The sorption with mixture of activated carbon and Ham-Baek sludge shows less effective on the removal of the cyanide. It is noted that UV-light is much effective on the removal of cyanide but also the attenuation is achieved until $[CN]_{tot}$ is up to 10 mg/L. Our findings demonstrate that both activated carbon and UV-light are very effective on the attenuation of cyanide over a wide range of environmental conditions.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.945-951
• /
• 2013

Changes in fermentation properties and ornithine levels of Baechu Kimchi by storage conditions were investigated. After making and fermenting Kimchi at $15^{\circ}C$ for 32 hr (S1), 36 hr (S2), 40 hr (S3), 44 hr (S4), and 48 hr (S5) during the first 10 days of storage. The Kimchi samples are subsequently stored in the -$1^{\circ}C$ Kimchi refrigerator for up to 60 days. Changes in the pH values and lactic acid contents of S4 and S5 samples are slightly bigger than the S1, S2 and S3 samples which have no significance differences. According to lactic acid bacteria (LAB) number, all samples show the largest augmentation according to the number of Lactobacilli during the first 20 days of storage. After 20 days of storage, the S4 and S5 samples show larger accumulations of LAB than S1, S2 and S3 samples. The Weissella genus is predominated at the 40 day of storage in the S5 sample. Ornithine levels are increased up to 170mg per 100 g during the storage period of 40~50 days in the S5 sample. However, the increase of ornithine levels in S1, S2 and S3 samples is smaller than those of the S4 and S5 samples. These results indicate that the conditions of Kimchi fermentation, which is 48 hr at $15^{\circ}C$ before storage, is proved to be the most superior for ornithine levels within the Kimchi refrigerator.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.1
• /
• pp.17-29
• /
• 2014

GRAS probiotics can be used to modulate intestinal microbiota and to alleviate various gastrointestinal disorders. In several recent studies, researchers have explored the potential expansion and usability of probiotics to reduce the risk factors associated with diseases, including obesity, hypercholesterolemia, arterial hypertension, hyperhomocysteinemia, and oxidative stress. In this review, our aim was to clarify the mechanism underlying interactions between hosts (animal or human) and probiotics and the beneficial effects of probiotics on human health.