• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.161-168
• /
• 2011

The heating, ventilating, air conditioning (HVAC) system is a very important part of an automotive vehicle: it controls the microclimate inside the passenger's compartment and removes the frost or mist that is produced in cold/rainy weather. In this study, the numerical analysis of the defrost duct in an HVAC system and the de-icing pattern is carried out using commercial CFX-code. The mass flow distribution and flow structure at the outlet of the defrost duct satisfied the duct design specification. For analyzing the de-icing pattern, additional grid generation of solid domain of ice and glass is pre-defined for conductive heat transfer. The flow structure near the windshield, streakline, and temperature fields clearly indicate that the de-icing capacity of the given defrost duct configuration is excellent and that it can be operated in a stable manner. In this paper, the unsteady changes in temperature, water volume fraction, and static enthalpy at four monitoring points are discussed.

• Korean journal of food and cookery science
• /
• v.18 no.3
• /
• pp.355-364
• /
• 2002

For the introduction of HACCP to industry food service, a survey was conducted from 150 dieticians and 40 managers on their recognition on HACCP system. The questionnaire of the survey included the status of current food safety management, management responsibilities, recognition on HACCP, problems in HACCP introduction. The majority of respondents was satisfied with the current food safety management, and the food service managers were more confident than dieticiant in terms of food safety. Foodservice managers (100%) and dieticians (96%) recognized HACCP system; however, they responded the application of HACCP to industry food service were only 27% and 12.5%, respectively. They pointed out the reasons that they cannot introduce HACCP to their industry food service were the lack of benefits and good facilities. Dieticians strongly recognized the need of correction oi food safety manasement in industry food service, compared with food service managers. The results suggest that the introduction of HACCP to industry food servife should be accomplislled by continuous education and information on food safety, improving facilities and a variety of benefits to HACCP-implemented companies from the government.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.68-77
• /
• 2015

One of recent concerns for super-tall buildings is how to manage hoisting plans and equipment efficiently. Disasters are frequently occurred in relation to electromotive hoists and cranes which are commonly used in construction sites. For construction lifts, particularly, it is highly important to conduct regular inspections or prepare against breakdown in terms of safety. However, unfortunately the reality is that regular inspections are only flatly conducted according to operating hours only. A lift, whose life span is subject to the complicated considerations such as operating hours, loading condition, and the like of each component, is far too invalid as a means of maintenance. As a way to resolve this problem and improve its convenience and safety for users, this study intends to calculate individual inspection interval for the main components of lifts by measuring their actual operating hours with sensing technology and analyzing their historical data. The findings of study include calculation of inspection intervals for the main components of lifts and classification of components to check by the actual operating hours of lift (40, 90, 130, 400 hours), which are drawn up into tables. This will make an opportunity to suggest efficient maintenance measures by enabling prevention of safety accidents and enhancement of safety for workers. Also, it will lead to increasing productivity of works by eliminating sources of delaying the term due to the breakdown of lifts.

• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.27-32
• /
• 2014

The sample book was printed in 1935. Since the books in the early twentieth century were printed using acidic paper, the color of the paper would change to brown over time due to iron corrosion. In addition to corroding iron cores, the acidity of the paper (pH 3.2) also made the paper brown and fragile, as was true in the case of the sample book. To clean the paper of the sample book and to make it strong, we replaced the iron core and performed wet cleaning on the paper to remove contaminants. Then we pressed the sample book dry, and subsequently linening every page with Minoshi($4g/m^2$). Generally, book conservator rebinding the book using wires or threads: however we have devised a new method to rebind the book using colored iron cores. To color the iron core brown, they were dipped in an aqueous coloring solution ($H_2O$, $C_2H_5OH$, $CuSO_4{\cdot}5H_2O$, $FeCl_3{\cdot}6H_2O$); subsequently, a 20% paraloid B-72 was applied to protect the colored iron cores from corrosion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.91-97
• /
• 1970

It is one of the important subjects in fall crop production of potatoes in korea to find the proper direct planting method as a substitute for transplanting method by sprouting inducement at seed-bed. From this point the author has undertaken this experiments to examine the effects of several handling methods of seed tuber pieces at planting on sprouting of fall grown potatoes at Ansung Agricultural College from August to september in 1969. The results of experiments induced sprouting with Gibberellin treatment using the variety Irish Cobbler were as follows; 1. Sun light exposure treatment to cut surface of potato seed pieces resulted in rotting of seed pieces and delay of sprouting and bud growth. Exposure more than three hours induced severe rotting(more than fifty percent) of seed pieces (Table I). 2. When soil moisture are abundant and the duration of sun light. exposure is short, even direct planting method of treated seed pieces with Gibberellin resulted in good potato stands (Table 2). 3. The direct planting method, as the rotting of seed pieces are avoidable are applicable in fall crop production of potatoes us a substitute for transplanting method because the sprouting and bud growth are promoted more in case of direct planting than transplanting (Table 3). 4. When the humidity in the bottle was low no healing effects was found by holding the seed pieces in large closed bottle under the trees for three days before planting (Table 2). 5. If duration of sunlight exposure is short, no difference of potato stands between clear day planting and cloudy day plant ing (Table 3). 6. As long as soil moisture deficiency. was not induced the irrigation at planting shows no effects to protect the seed piece rotting after planting (Table 3).

• Journal of Radiation Protection and Research
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2013

Education and training is an important means of promoting safety culture and enhancing the level of competence of radiation worker in radiation protection. The existing international nuclear education and training of short duration has been carried out on the high-level officials and focussed on the classroom based training. The developing countries has been asking for support to cultivate their own technical experts to Korea which is a donor country exporting nuclear power plants. This paper summarizes the results of developing and operating the international education and training course to froster technical experts in radiation protection that emphasized practical training sessions and technical visits using the excellent domestic radiation facilities and infrastructure of education and training. It mentions the procedures of assessment and feedback as well. In an effort to maximize teaching-learning effects and to maintain consistency of the learning objectives, methods and assessment, SAT methodology has been applied on the processes of developing and operating the course. In the comparative and final assessment which were conducted at the beginning or at the end of training course, participants' average score increased around 2 points. The questionnaire of participants showed a high level of satisfaction of 4.0 points or above for the most of the questions. These imply teaching-learning methods applied to it might be effective. The teaching-learning methodologies may provide the opportunity to develop the customized training course for bringing up international technical experts and to shift educational paradigm from theory-oriented to on-site practice-based education.

• Journal of the Korea Concrete Institute
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2017

As per current seismic design codes, diagonally reinforced coupling beams are restricted to coupling beams having aspect ratio below 4. However, a grouped diagonally reinforcement detail makes distribution of steel bars in the beam much harder, furthermore it may result in poor construction quality. This paper describes the experimental results of concrete coupling beam reinforced with high-strength steel bars (SD500 & SD600 grades). In order to improve workability for fabricating coupling beams, a headed large diameter steel bar was used in this study. Two full-scale coupling beams were fabricated and tested with variables of reinforcement details and aspect ratio. To reflect real behavior characteristic of the beam coupling shear walls, a rigid steel frame system with linked joints was set on the reaction floor. As a test result, it was noted that cracking and yielding of reinforcement were initially progressed at the coupling beam-to-shear wall joint, and were progressed to the mid-span of the coupling beam, based on the steel strain and failure modes. It was found that the coupling beams have sufficient deformation capacity for drift ratio of shear wall corresponding to the design displacement in FEMA 450-1. In this study, the headed horizontal steel bar was also efficient for coupling beams to exhibit shear performance required by seismic design codes. For detailed design for coupling beam reinforced with high-strength steel, however, research about the effect of variable aspect ratios on the structural behavior of coupling beam is suggested.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.199-212
• /
• 2010

To establish an infrastructure for technology and information in the domestic construction industry, several construction regulations pertaining to construction information have been institutionalized. However, there are major problems with the domestic information classification system, earned value management (EVM) and project management information system (PMIS). In particular, the functions of the current PMIS have consisted of a builder-oriented system, and as EVM is not applied to PMIS, the functions of reporting, analysis and forecast for owners are lacking. Moreover, owners cannot confirm information on construction schedule and cost in real time due to the differences between the EVM and PMIS operation systems. The purpose of this study is to provide a framework that is capable of operating PMIS efficiently under an e-business environment, by providing a proposal on how to establish a work breakdown structure (WBS) and an EVM - PMIS integration model, so that PMIS may provide the function of EVM, and stakeholders may have all information in common. At the core of EVM - PMIS integration is the idea that EVM and PMIS have the same operation system, in order to be an activity-based system. The principle of the integration is data integration, in which the information field of an activity is connected with the field of a relational database table consisting of sub-modules for the schedule and cost management function of PMIS using a relational database management system. Therefore, the planned value (PV), cost value (CV), actual cost (AC), schedule variance (SV), schedule performance index (SPI), cost variance (CV) and cost performance index (CPI) of an activity are connected with the field of the relational database table for the schedule and cost sub-modules of PMIS.

• Journal of Korea Game Society
• /
• v.11 no.5
• /
• pp.67-78
• /
• 2011

This paper introduces an efficient and satisfactory search interface that enables users to browse and find the video data they want from a massively huge video database widely used in various multimedia environment. The target user group is information analysts at US defense industry or governmental intelligence agencies whose job is to identify a certain person from a lot of video footage taken from CCTV(Closed-circuit Television) cameras. For the first user test, we suggested the CAVE-like virtual reality interface to be the most optimal for the tasks we designed for, so we compared this interface with desktop interface. The softwares and database developed and optimized for each task were used in this user test. For the second user test, we researched on what input devices would be most optimal for enhancing efficiency of search task in the CAVE-like virtual reality system. Especially we focused our effort on measuring the effectiveness and user satisfaction of three different types of devices that embody gestural interface input system that encourages users' ergonomic control of the interface. We also measured the time consumed for performing each task to find out the most efficient input device among the ones tested.

• The KIPS Transactions:PartD
• /
• v.17D no.1
• /
• pp.1-8
• /
• 2010

Association rule mining techniques enable us to acquire knowledge concerning sales patterns among individual items from voluminous transactional data. Certainly, one of the major purposes of association rule mining is utilizing the acquired knowledge to provide marketing strategies such as catalogue design, cross-selling and shop allocation. However, this requires too much time and high cost to only extract the actionable and profitable knowledge from tremendous numbers of discovered patterns. In currently available literature, a number of interest measures have been devised to accelerate and systematize the process of pattern evaluation. Unfortunately, most of such measures, including support and confidence, are prone to yielding impractical results because they are calculated only from the sales frequencies of items. For instance, traditional measures cannot differentiate between the purchases in a small basket and those in a large shopping cart. Therefore, some adjustment should be made to the size of market baskets because there is a strong possibility that mutually irrelevant items could appear together in a large shopping cart. Contrary to the previous approaches, we attempted to consider market basket's size in calculating interest measures. Because the devised measure assigns different weights to individual purchases according to their basket sizes, we expect that the measure can minimize distortion of results caused by accidental patterns. Additionally, we performed intensive computer simulations under various environments, and we performed real case analyses to analyze the correctness and consistency of the devised measure.