• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.127-136
• /
• 1998

On-line geometrical quality assurance system has been developed using electronic portal imaging system(OQuE). EPID system is networked into Pentium PC in order to transmit the acquisited images to analysis PC. Geometrical QA parameters, including light-radiation field congruence, collimator rotation axis, and gantry rotation axis can be easily analyzed with the help of graphic user interface(GUI) software. Equipped with the EPID (Portal Vision, Varian, USA), geometrical quality assurance of a linear accelerator (CL/2100/CD, Varian, USA), which is networked into OQuE, was performed to evaluate this system. Light-radiation field congruence tests by center of gravity analysis shows 0.2～0.3mm differences for various field sizes. Collimator (or Gantry) rotation axis for various angles could be obtained by superposing 4 shots of angles. The radius of collimator rotation axis is measured to 0.2mm for upper jaw collimator, and 0.1mm for lower jaw. Acquisited images for various gantry angles were rotated according to the gantry angle and actual center of image point obtained from collimator axis test. The rotated images are superpositioned and analyzed as the same method as collimator rotation axis. The radius of gantry rotation axis is calculated 0.3mm for anterior/posterior direction (gantry 0$^{\circ}$ and 170$^{\circ}$) and 0.7mm for right/left direction(gantry 90$^{\circ}$ and 260$^{\circ}$). Image acquisition for data analysis is faster than conventional method and the results turn out to be excellent for the development goal and accurate within a milimeter range. The OQuE system is proven to be a good tool for the geometrical quality assurance of linear accelerator using EPID.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.167-174
• /
• 2005

This study is to objectively support the emotional and intuitional decision making of the designer by means of developing the supporting models and tools of color coordination. Based on the color grouping system and representative vocabularies suggested in the precedent 'Study on the Grouping System of Fabric Color,' this study suggested the manufacture of the supporting model of color coordination that could be used practically through the design of coloring group. The results of this study can be summarized as below. Firstly, 687 colors in total have been collected from the four world famous collections, the street fashion of 2002 F/W 2003 S/S Season and the representative brands in each group for five years from 1999 to 2003 in order to single out the basic colors for the purpose of composing the color groups. Secondly, 687 collected colors have been grouped into 144 colors in total through the three-step process for the extraction of coloring groups. Thirdly, the final extracted colors have been divided into , , , group by the grouping system specified in the precedent study and the said four large groups have been again subdivided into 12 small groups. Fourthly, the suggested colors in each group have established a color coordination system by introducing the concept of the crossover coordination that could be matched with other groups as well as the coordination within the group. Fifthly, we have dyed 144 colors in total that have consisted of the coloring system of four representative groups (twelve subgroups) in each methodical tone as in the above in cotton yarn, one of the representative materials in fabric fashion design industry. Besides, we have specified the symbol of the Pantone Color Book and CMYK values in each color that has consisted of the system considering the industrial characteristics of fashion as a global business and the compatibility with the related design industry. Sixthly, we have packed the completed yam made of fabrics in the designed container for the easy use of cross-coordination and have completed a color coordination system that could be easily utilized for the fashion-related working-level staffs.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.15-25
• /
• 2007

In general, the life and asset casualties that occur due to landslide or slope failure in urban areas are larger than that in rural areas. In order to reduce the casualties, a slope management program is necessary to categorize slopes based on properties and to manage them systematically. The slope management system is the establishment of the data base for the geological and geotechnical factor according to slope stability, and the utilization of the data base to manage slopes. The suitable system must develop to slopes in urban area through the survey, analysis and evaluation process. Based on the above necessity, the slope management program which is applicable to slope management in an urban area has been developed at Hwangryung Mt. in Busan as a target area. The developed slope management program has various functions such as slope ID number of each slope or sub-region of a mountain, making a slope data sheet, analysis and grouping of slope stability, and establishment of a data base. The slope management program is constructed by use of GIS, and the survey, test and analysis data according to all slopes can be input and edited into the program. The program can also be utilized practically by end users due to the convenient input, edition printing, management and operation of slope data. Therefore, the slope management system has been established on the application of the developed program in Busan which is located in slope area. As the system is widely applied to other cities, the slope in urban area can be managed systematically and the slope hazards can be minimized.

• Journal of Nutrition and Health
• /
• v.53 no.1
• /
• pp.54-67
• /
• 2020

Purpose: This study examined the relationship between job stress, attributes of health functional food (HFF) selection, and consumption values for information technology (IT) workers, and analyzed the factors influencing the selection of HFF to improve health by making the right choice of HFFs. Methods: Three hundred forty IT workers in Gyeonggi area participated in the study. The participants were divided into low or high job stress group. The differences in participants' general characteristics, attributes of HFF selection, and HFF consumption values were investigated, and the mediating effects of HFF consumption values on the relationship between job stress levels and the HFF selection attributes were analyzed. Results: Job stress levels were high in those IT workers with a length of service < 5 years (p = 0.013). The group with lower job stress levels had a higher tendency to consider the ingredients contained in HFF products (p < 0.001), and their efficacy (p = 0.047). They also showed greater emotional value for a sense of security from consuming HFFs to stay healthy (p = 0.047). The group with higher job stress levels had greater epistemic value in that their choice of HFFs differentiated them from the other workers (p = 0.036). Higher job stress was associated with less consideration of the intrinsic attributes such as ingredients and efficacy of the HFF selection attributes (p = -0.113), emotional value of the HFF consumption values (p = -0.136), and the functional value such as practicality, price, and safety (p = -0.134). The job stress level influenced the intrinsic attributes through the functional and emotional values, demonstrating that the functional and emotional values had appropriate mediating effects on the relationship between job stress levels and intrinsic attributes. Conclusion: Education needs to be provided for workers to relieve job stress and improve the functional and emotional values, which contributes to choosing the appropriate HFFs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.10 no.1
• /
• pp.1388-1393
• /
• 1968

Higher yield in rice paddies is greatly dependent on adequately balanced and timely supply of water. A majority of rice paddy in Korea is generally irrigated by rainfall, but in many cases it has to be supplemented by artificial irrigation for optimum rice culture. Although the water requirement of rice plant is far higher than that of other crops, submerged condition of rice paddy is not necessarily required. The moisture requirement of rice plant varies with its growing stages, and it is possible to increase the irrigation efficiency through reduction of water loss due to percolation in rice paddies. An experiment was conducted on the effectiveness of economical use of water by different irrigation period and different method of cultivation. The experimental plots were set up by means of randomized block design with three duplications; (a) Alltime submerged (b) Economically controlled, and (c) Extremely controlled. Three different irrigation periods were (a) Initial stage (b) Inter-stage, and (c) last stage. The topsoil of the three plots were excavated to the depth of 30cm and then compacted with clay of 6 cm thickness. Thereafter, they were piled up with the excavated top soils, leveled and cored with clay of 6cm thickeness arround footpath in order to prevent leakage. The results obtained frome the experiments are as follows; (1) There is no difference among the three experiment plots in terms of physical and chemical contditions, soil properties, and other characteristics. (2) Colulm length and ear length are not affected by different irrigation methdos. (3) There is no difference in the mature rate and grain weight of rice for the three plots. (4) The control plot which was irrigated every three days shows an increased yield over the all the time submerged plot by 17 persent. (5) The clay lined plot whose water holding capacity was held days long, needs only to be irrigated every 7 days. (6) The clay lined plot showes an increased yield over the untreated plot; over all the time submerged plot by 18 percent, extremely controlled plot by 18 percent, and economically controled plot by 33 percent.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.380-391
• /
• 1993

The experimental study was made to propose the treatment method of wastewater in the high-density fish culture system. The BOD to COD ratios of effluents were almost same to 0.65 in the eel-farm, but were various in the farm rearing together with tilapia etc. A BOD rate curve of the eel-farm effluent could be described mathematically by the equation, $BODu=14.1(1-10^{-0.222t})+30.9(1-10^{-0.035(t-8)})$. Nitrification in Biological Fluidized Bed(BFB) system to treat the fish-farm wastewater could be reduce ammonium level up to $65{\sim}79\%$ when ammonium loading rates were between 0.014 and 0.075g $NH_4/g$ BVS-day. Nitrification efficiency was decreased by organic matters in the wastewater when ammonium loading was low(0.014 g $NH_4/g$ BVS-day). T-N removal ratios were decreased to increase loading in denitrification process, because of low C/N ratio. Based on much higher biological mass concentrations, BFB system takes many advantages of a practical viewpoint, such as stability of treatment efficiency and reduction of necessary site area for the facility, as compared with conventional treatment systems.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.457-468
• /
• 1995

In order to develop a more practical culture system from the present running seawater tank system, two experiments of environmental factors, growth, survival rate and rearing density of olive flounder (Paralichthys olivaceus) were carried out for two consecutive years. Two groups of fish in initially averaging 7.5cm of total length, and 3.4g of body weight (EXP. I) and 5.0cm and 1.8g (EXP. II) were reared in the semi-closed recirculating seawater system equipped with the rotating biological contactors with the commercial culture scale. The dissolved inorganic nitrogen concentrations is EXP. I ranged 0,247-0.512 ppm of $NH_4-N$ (0.010-0.043 ppm of$NO_2-N$, and 0.108-0.342 ppm of $NO_3-N$, and those in EXP. II were 0.091-0.715 ppm, 0.002-0.045 ppm, and 0.007-0.277 ppm, respectively. Daily feeding rates of the fish were $0.67-2.41\%$ in EXP. I and $0.69-2.22\%$ in EXP_ II, and teed efficiency were $34.8-59.8\%\;and\;40.5-88.4\%$ in EXP. I and II, respectively. The average total ten說h and body weight were 40.0-42.8cm and 695.0-852.69g after 340 days culture in EXP. I, and 36.7-39.7cm and 552.4-706.4 g after 365 days culture in EXP. II, respectively. Survival rates of the fish at the end of EXP. I and II were $92.0\%\;and\;96.0\%,$ respectively. The ratio to body surface area of non-ocular side in all fish to bottom area of rearing tank, so-called covering rate, was used as an indicator of rearing density. The highest cowering rate and weight density of fish per $m^2$ of rearing tank at the end of experimental period were 2.2 and 34.1kg in EXP. I, and 2.6 and 36.3kg in EXP. II, respectively. For the commercial culture of olive flounder, the semi-closed recirculating seawater system was found to be more effective than the running seawater tank system in aspect to the fish productivity and protection of marine environment.

• Journal of Chest Surgery
• /
• v.30 no.7
• /
• pp.647-655
• /
• 1997

We evaluated the feasibility and safety of this method by reviewing the early outcome of the patients who underwent coronary artery bypass grafting(CABG) utili ing parallel sequential anastomoses with saphenous vein grafts, comparing with the outcome of the patients revascularized with grafts having only single distal anastomosis. During the one-year period of 1995, a total of 79 patients underwent isolated CABG, among whom 39 patients with sequential vein grafts(sequential group) and 40 patients without sequential grafts(non-sequential group). There was no difference between the two groups in terms of preoperative status, except in the extent of the coronary disease; 87.2% of the sequential group and 45.0% of the non-sequential group had left main andlor triple vessel involvement. 318 distal coronary anastomoses were done; 198 for the sequential group(5.1/patient) and 120 for the non-sequential group(3.0/patient). In the sequential group, the mean durations of cardiopulmonary bypass and aortic clamp per one distal anastomosis were 33.5 and 21.1 minutes, respectively. In the non-sequential group, these were 41.8 and 22.7 minutes. There were two operative deaths, both in the non-sequential group. There was no difference in the incidence of postoperative complications including myocardial infarction. During the follow-up period(2 to 15 months), 8 patients(3 in the sequential and 5 in the nonsequential group) complained of residual or recurrent angina. Comparison of preoperative and postoperative ."'Thallium myocardial perfusion scans in 30 patients showed improved or normal perfusion reserve in 83.3% of segments bypassed with sequential grafts and 82.5% of segments bypassed with non-sequential graft(5), These results show that, utilizing parallel sequential anastomoses with saphenous vein grafts, we could achieve satisfactory short-term clinical results in patients with extensive coronary stenoses. So, we conclude that this technique is a safe, technically feasible strategy for CABG, which can achieve the aim of complete myocardial revascularization with a limited length of graft.raft.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.100-106
• /
• 2003

Purpose : To develop a patients' setup verification tool (PSVT) to verify the alignment of the machine and the target isocenters, and the reproduclbility of patients' setup for three dimensional conformal radiotherapy (3DCRT) and intensity modulated radiotherapy (IMRT). The utilization of this system is evaluated through phantom and patient case studies. Materials and methods : We developed and clinically tested a new method for patients' setup verification, using digitally reconstructed radiography (DRR), simulation, porial and digital images. The PSVT system was networked to a Pentium PC for the transmission of the acquired images to the PC for analysis. To verify the alignment of the machine and target isocenters, orthogonal pairs of simulation images were used as verification images. Errors in the isocenter alignment were measured by comparing the verification images with DRR of CT Images. Orthogonal films were taken of all the patients once a week. These verification films were compared with the DRR were used for the treatment setup. By performing this procedure every treatment, using humanoid phantom and patient cases, the errors of localization can be analyzed, with adjustments made from the translation. The reproducibility of the patients' setup was verified using portal and digital images. Results : The PSVT system was developed to verify the alignment of the machine and the target isocenters, and the reproducibility of the patients' setup for 3DCRT and IMRT. The results show that the localization errors are 0.8$\pm$0.2 mm (AP) and 1.0$\pm$0.3 mm (Lateral) in the cases relating to the brain and 1.1$\pm$0.5 mm (AP) and 1.0$\pm$0.6 mm (Lateral) in the cases relating to the pelvis. The reproducibility of the patients' setup was verified by visualization, using real-time image acquisition, leading to the practical utilization of our software Conclusions : A PSVT system was developed for the verification of the alignment between machine and the target isocenters, and the reproduclbility of the patients' setup in 3DCRT and IMRT. With adjustment of the completed GUI-based algorithm, and a good quality DRR image, our software may be used for clinical applications.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.1
• /
• pp.98-109
• /
• 2010

Research on the construction, measurement, and management of brand equity has been extensive since David A. Aaker(1991) and Kevin Lane Keller(1993) first advanced the concept. Recently, much attention has been devoted to the components of brand equity: brand awareness, perceived quality, brand image, and brand loyalty. This study explores the relationships among these components, focusing particularly on the moderating role of product type (utilitarian vs. hedonic) in their causal relationships. A model to study the relationship among components of brand equity, particularly the moderating role of product type, is featured in Figure 1. The hypotheses of the study are proposed as follows: that consumers' brand awareness has a positive influence on brand loyalty and brand image; that consumers' perceived quality has a positive influence on brand loyalty and brand image; that consumers' brand image influences brand loyalty positively; and that relationships among components of brand equity will be moderated by product type. That is, in the case of utilitarian products, the impact of perceived quality on brand loyalty will be relatively stronger, whereas with hedonic products the impact of brand image on brand loyalty will be relatively stronger. To determine the products for the study, a pre-test of 58 college students in the Seoul metropolitan area was conducted based on the product type scale. As a result, computers were selected as the utilitarian product and blue jeans became the hedonic product. For each product type, two brands were selected: Samsung and HP for computers, and Levis and Nix for blue jeans. In the main study, 237 college students in the metropolitan area were surveyed to measure their brand awareness, perceived quality, brand image, and brand loyalty toward the selected two brands of each product type. The subjects were divided into two groups: one group (121 subjects) for computers, the other (116 subjects) for blue jeans. The survey questionnaires for the study included four parts: five questions on brand awareness and four questions each on perceived quality, brand image, and brand loyalty. All questions were to be answered using 7-point Likert scales. The data collected by the survey were processed to assess reliability and validity, and the causal relationships were analyzed to verify the hypotheses using the AMOS 7 program, a tool for analyzing structural equation modeling. A confirmatory factor analysis assessed the appropriateness of the measurement model, and the fit indices denoted that the model was satisfactory. The relationships among the components of brand equity were also analyzed using AMOS 7. The fit indices of the structural model denoted that it was also satisfactory. The paths in the structural model as will be seen in Figure 2 show that perceived quality affects brand image positively, but that brand awareness does not affect brand image. Moreover, it shows that brand awareness, perceived quality, and brand image are positively related with brand loyalty, and that this relationship is moderated by product type. In the case of utilitarian products, perceived quality has relatively more influence on brand loyalty. Conversely, in the case of hedonic products, brand image has relatively more influence on brand loyalty. The results of this empirical study contribute toward the advancement of our understanding of the relationships among the components of brand equity and expand the theoretical underpinnings for brand equity measurement. It also helps further our understanding of the effect of product type on customer-based brand equity. In a marketing management practice perspective, these results may provide managerial implications for building and maintaining brand equity effectively.