• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.4
• /
• pp.1-9
• /
• 2014

This research aims to analyze changes in anion according to locations through changes in the measuring point centering on a single tree. The subject tree was the Zelkova serrata which is most widely used as a landscape tree, and the measurement was conducted for a total of 3 days with summer solstice as the basic date. In consideration of the solar altitude and the location of the Zelkova serrata, a total of 4 measurement points - $T_a$ at the opposite direction of the shadow, $T_b$ in the center of the tree $T_c$ in the center of the shadow, and $T_d$ at the end of the shadow - were established. The mean temperature of the measurement days was the highest at $T_a$ with $28.4^{\circ}C$ and was the lowest at $T_c$, in the center of the shadow with $27.9^{\circ}C$. The relative humidity was the lowest with 42.5% at $T_a$ where the temperature was the highest. The amount of insolation was the highest at $T_a$ with $1,024.6W/m^2$, followed by $T_d(701.48W/m^2$), $T_c$($215.63W/m^2$), and $T_b(227.75W/m^2)$, and the anion was the highest at $T_a$ with $654ea/cm^3$, followed by $T_d$, $T_c$, and $T_b$, with $639.4ea/cm^3$, $615.3ea/cm^3$, $612.3ea/cm^3$, respectively. The results of the correlation analysis proved that anion correlated with the temperature, the amount of insolation, and the relative humidity on the significant level. Of these, the temperature and the amount of insolation had the positive correlation with the correlation coefficients of .687 and .332, respectively, and the significance probability of .000, and .037, respectively. The relative humidity was found to have negative correlation. Its correlation coefficient and the significance probability were -.557, and .000, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.61-66
• /
• 2012

Purpose: This study was to compare the cumulative survival rate (CSR) of Br${\aa}$nemark machined surface implants and TiUnite$^{TM}$ imlants and to analyze association between risk factors and the CSR of the implants. Materials and methods: A retrospective study design was used to collect long-term follow-up clinical data from dental records of 156 patients treated with 541 Br${\aa}$nemark machined and TiUnite$^{TM}$ implants at Korea University Guro hospital in South Korea from 1993 through 2008. Machined implant and TiUnite$^{TM}$ implant were compared by CSR. Exposure variables such as gender, systemic disease, location, implant length, diameter, prosthesis type, opposing occlusion type, date of implant placement, type of edentulous space, abutment type, existence of splinting with natural teeth, and existence of cantilever were collected. Life table analysis was undertaken to examine the CSR. Cox regression method was conducted to assess the association between potential risk factors and overall CSR (${\alpha}$=.05). Results: Patient ages ranged from 16 to 75 years old (mean age, 51 years old). Implants were more frequently placed in men than women (94 men versus 63 women). Since 1993, 264 Br${\aa}$nemark machined implants were inserted in 79 patients and since 2001, 277 TiUnite$^{TM}$ implants were inserted in 77 patients. A total survival rate of 86.07% was observed in Br${\aa}$nemark and Nobel Biocare TiUnite$^{TM}$ during 15 years. A survival rate of machined implant during 15 years was 82.89% and that of TiUnite$^{TM}$ implant during 5 years was 98.74%. The implant CSR revealed lower rates association with several risk factors such as, systemic disease, other accompanied surgery, implant location, and Kennedy classification. Conclusion: Clinical performance of Br${\aa}$nemark machined and TiUnite$^{TM}$ implant demonstrated a high level of predictability. In this study, TiUnite$^{TM}$ implant was more successful than machined implant. The implant CSR was associated with several risk factors.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.37-44
• /
• 1984

The study was carried out to investigate the relationship of certain socio-economic factors to the private owner's knowledge of forestry practices. The dependent variable was knowledge level in forestry, and the six independent variables were owner's age, educational level, forestland area, socio-economic status, communication and socio-psychological factors. For the study the data were collected by interviewing 258 private forest owners, and analized primarily by multiple correlation statistical technique. The sampled private owners were grouped into two categories: the common owners and model owners. 1) The average score of forestry knowledge of common owners was lower than that of model owners, and the difference was about 15 scores. The scores of other independent variables such as age, educational level, forestland area, socio-economic status, communication and socio-psychological factors of common owners were also significantly lower than those of model owners. 2) The common owner's knowledge of forestry practice were positively correlated with educational level, socio-psychological and communication variables. On the other hand, the model owner's were negatively correlated with the educational level, but positively with the socio-economic status and the socio-psychological variables. 3) The multiple correlation coefficient between the common owner's knowledge scores and six independent variables was 0.5667. About 31.46 percent of the variance of this knowledge could be explained by the communication variable, and other 1.42 percent by the socio-psychological factor. In the case of model owners, the multiple correlation was 0.5332, and about 16.62 percent of the variance of the knowledge could be explained by the communication variable, and ls.y percent by the socio-psychological factor. 4) The opportunity of communication contact through the mass media, personal communication and owner's social participation should be augmented for the effective forestry extension works, because it is one of the results of the study that the private forest owner's knowledge in forestry was greatly affected by communication variable.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.33-49
• /
• 2016

The study area, located in Sinam-ri, Ulsan, in the southeastern part of the Korean Peninsula, is mainly composed of hornblende granite (ca. 65 Ma). Fracturing and reactivation of a fault striking ENE-WSW was strongly controlled by the intrusion of a mafic dyke (ca. 44 Ma), which behaves as a discontinuity in the mechanically homogeneous pluton, increasing the instability of the basement in this area. A geometric and kinematic study undertaken to interpret the faults and fractures was performed in a trench excavated almost perpendicular to the orientation of the dyke. The analysis of structural elements, such as dykes, veins, and faults, is used to infer the deformation history and to determine the paleostress orientations at the time of formation of the structures. The deformation history established based on this analysis is as follows: (1) NNE-SSW, E-W, ENE-WSW, and NE-SW trending fractures had already developed in the pluton before dyke intrusion; (2) felsic dykes intruded under conditions of σ_Hmax oriented N-S and σ_Hmin oriented E-W; (3) mafic dykes intruded under conditions of σ_Hmax oriented E-W and σ_Hmin oriented N-S; (4) dextral reactivation of the main fault associated with the development of hydrothermal quartz veins under conditions of σ_Hmax oriented E-W and σ_Hmin oriented N-S; (5) sinistral reactivation of the main fault and high-angle normal faults under conditions of σ_Hmax oriented NE-SW and σ_Hmin oriented NW-SE; and (6) dextral reactivation of the main fault and NE-SW low-angle reverse faults under conditions of σ_Hmax oriented NW-SE and σ_Hmin oriented NE-SW. These results are consistent with the tectonic history of the Pohang-Ulsan block in the southeastern part of the Korean Peninsula, and indicates the tectonic deformation of the southern area of the Ulsan fault bounded by Yangsan fault was analogous to that of the Pohang-Ulsan area from the Cenozoic. This work greatly aids the selection of sites for critical facilities to prevent potential earthquake hazards in this area.

• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.456-460
• /
• 2011

This study was carried out to compare the pattern of mutant variation and to evaluate the characteristics of mutants obtained by gamma irradiation in rose 'Kardinal'. Forty four rooted cuttings of 'Kardinal' were irradiated at 70 Gy gamma-ray dose from a $^{60}Co$ source to induce mutants in 2002. The irradiated plants were planted in field, and observed spotting of petal color mutants from 2002 to 2004. Four different kinds of mutant twigs with each different color flower were obtained from the irradiated 'Kardinal' with red petal. After being identified to be a stable mutant from 2004 to 2008, each mutant line propagated by cutting was hydroponic-cultured to evaluate the characteristics in the greenhouse from 2008 to 2009. Four mutant lines obtained from 'Kardinal' with red petal (Red group, 44A, 45B) include KA1 with light pink petal (Red group, 55B-55D), KA2 with pink petal (Red group, 63A-63B), KA3 with deep pink (Red purple, N57A-N57C), and KA4 with orange red (Red group, 43A-43B). Diameters of each flower in four mutant lines were different from 'Kardinal'. The line KA1 was 9.5 cm wide, and it showed the smallest diameter when compared to other mutants. While the line KA2 was the largest one with 12.5 cm 'Kardinal'. Petal number per flower was also variable among the mutants. The line KA2 had 39.8 petals being the largest number among the mutants, while the line KA1 was the lowest one compared to 35.5 petals of 'Kardinal'. Petal color was measured by using colorimeter. Brightness (L) measured at each petal of four mutants increased more than 'Kardinal'. CIE Lab values, a and b decreased more than 'Kardinal' at the petal color of three mutants except the line KA4. Characteristics of shoot, leaf, etc. from four mutants were also different from the ones of 'Kardinal'. The line KA1 was shortest in shoot, node and peduncle length, and lowest in prickle number. The reverse side of leaves was reddish green color in 'Kardinal' as well as the line KA4, but green color in the line KA1, KA2, and KA3.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.62-69
• /
• 2012

Purpose: The present study has an objective of effectively separating and making observations on a portion of radiopharmaceutical excreted via digestive organ to remain in the organ and invade a heart shadow. Materials and methods: When heart shadow is blocked by the organ in tests during a resting phase and a loaded phase, additional images were obtained using immobilization device. The immobilization devices were used to tilt the upper body forward from supine position. Results: In the reconstructed image for the separated case, as compared with the case where a part of organ is overlapped with heart, in terms of an overall mean value for each parameter, the end-diastolic volume increased by 2.75 mL, the end-systolic volume decreased by 3.16 mL, the left ventricle cardiac coefficient increased by 3.58%, and the area of defect region decreased by 3.58 and 3.92 cm for loading and resting phase, respectively. Conclusions: In the present study with myocardial perfusion SPECT, overlapped areas of heart and other organs could be effectively separated and visualization by the use of an immobilization device.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.6
• /
• pp.519-526
• /
• 1999

Purpose: This study was designed to evaluate the usefulness of a technetium-99m mercaptoacetyltriglycine (Tc-99m MAG3) single photon emission computed tomography (SPECT) performed on transplanted kidney. Materials and Methods: Thirty renal transplant patients were included in this study. Planar scan was performed for 30 minutes using 555 MBq Tc-99m MAG3. A post-voiding SPECT scan was acquired on the third, seventh, fourteenth and twenty eighth day after transplantation. Results: SPECT scan showed interpretable image quality in 26 of 30 patients (86.7%) and 84 in 120 scans (70%). Fourteen of 26 patients with interpretable SPECT image showed decreased or increased radioactivity, but only 5 had abnormal findings on the planar scan. Focal SPECT defects were seen in allografts with normal function (n=3), acute tubular necrosis (n=3), and acute rejection (n=2). The defects are thought to reflect focally underperfused renal parenchyme or, in normal allografts, an artifact from uneven radioactivity distribution. Four of 10 patients with renal arterial variation showed focally decreased radioactivity and SPECT helped guide funker studies that confirmed the exact cause. Five of 10 patients with acute tubular necrosis or acute rejection showed focally decreased radioactivity, but its relation to the patients' clinical course was not clear. Focally increased radioactivity was observed in 5 allografts with normal function and 1 with double ureter in which local clearance delay was observed. Conclusion: Tc-99m MAG3 SPECT renal scan can detect additional focal abnormalities compared to planar scan. Further study is necessary to elucidate the exact clinical significance of the SPECT findings.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.721-732
• /
• 2008

Pressed ham was manufactured to investigate the effects of grape seed oil on the quality characteristics of pressed ham. Five treatments were divided based on differences in the amount of grape seed oil added into the pressed ham. For control, 10% of back fat was only added without grape seed oil. For the first treatment, 10% of grape seed oil among the lard component added into the pressed ham was replaced. For the 2nd, 3rd and 4rd treatments, 20%, 30% and 40% of grape seed oil was respectively replaced. Pressed ham manufactured using grape seed oil was vacuum packaged and then stored for 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory properties, TBARS and fatty acid composition. In the 1, 21 and 28 days of storage, shear force value of grape seed oil treatment (T4) was significantly lower than that of control (P<0.05). No remarkable differences were found in sensory properties among control and grape seed oil treatment groups. The TBARS value was significantly higher in control than in grape seed oil treatment group(T4) at 28 days of storage (P<0.05). The TBARS of control and grape seed oil treatment groups increased significantly as the storage period increased(P<0.05). The linoleic acid(C18:2) content of grape seed oil treatment groups was significantly higher than that of control(P<0.05). But the contents of C10:0～C20:4 were decreased significantly by grape seed oil additive (P<0.05). Saturated and monounsaturated fatty acid content of control was significantly higher than that of grape seed oil treatment groups(P<0.05). Whereas the increase level of grape seed oil additive resulted in the significantly higher polyunsaturated fatty acid content(P<0.05). Based on these findings, we conclude that the sensory properties and lipid oxidation(TBARS) of manufactured pressed ham were not affected by grape seed oil addition. Also, our results indicate that high-quality pressed ham can be manufactured with strengthen of polyunsaturated fatty acid content.

• Journal of radiological science and technology
• /
• v.36 no.4
• /
• pp.327-335
• /
• 2013

This study investigates the case of clinical application for TomoDirect 3D-CRT(TD-3D) and TomoHelical 3D-CRT(TH-3D) with evaluating dose distribution for clinical application in each case. Treatment plans were created for 8 patients who had 3 dimensional conformal radiation therapy using TD-3D and TH-3D mode. Each patients were treated for sarcoma, CSI(craniospinal irradiaion), breast, brain, pancreas, spine metastasis, SVC syndrome and esophagus. DVH(dose volume histogram) and isodose curve were used for comparison of each treatment modality. TD-3D shows better dose distribution over the irradiation field without junction effect because TD-3D was not influenced by target length for sarcoma and CSI case. In breast case, dosimetric results of CTV, the average value of D 99%, D 95% were $49.2{\pm}0.4$ Gy, $49.9{\pm}0.4$ Gy and V 105%, V 110% were 0%, respectively. TH-3D with the dosimetric block decreased dose of normal organ in brain, pancreas, spine metastasis case. SCV syndrome also effectively decreased dose of normal organ by using dose block to the critical organs(spinal cord <38 Gy). TH-3D combined with other treatment modalities was possible to boost irradiation and was total dose was reduced to spinal cord in esophagus case(spinal cord <45 Gy, lung V 20 <20%). 3D-CRT using Tomotherapy could overcomes some dosimetric limitations, when we faced Conventional Linac based CRT and shows clinically proper dose distribution. In conclusion, 3D-CRT using Tomotherapy will be one of the effective 3D-CRT techniques.

• Korean Journal of Organic Agriculture
• /
• v.24 no.3
• /
• pp.525-537
• /
• 2016

This study was aimed to grow organic forage as a prime requirement for organic Hanwoo cattle production over a period of 3 years (2012~2015) in Gyeongbuk region, Korea through mixed cropping of winter fodder barley with legume and application of fermented cattle manure. The effect of barley-legume mixed cropping and application of different levels of fermented cattle manure was studied on forage productivity of whole-crop barley (WCB) and evaluation of feeding capacity of Korean native cattle (Hanwoo) per unit area. The collected data was analyzed using SAS 9.3 software. Barley-legume mixed cropping increased (P<0.05) yields of dry matter (DM), crude protein (CP) and total digestible nutrients (TDN) as compared to those of sole WCB as monoculture. Similarly, acid detergent fiber (ADF) contents and relative feed value (RFV) were also higher (P<0.05) in barley-legume mixed sowing forage compared with those of sole WCB as monoculture. In case of manure application, yields of DM, CP and TDN were also found (P<0.05) highest in 100~150 kg N/ha. However, varying cattle manure levels did not influence (P>0.05) CP and neutral detergent fiber (NDF) contents. In response to increasing nitrogen application level, ADF content increased (P<0.05) but TDN content and RFV decreased (P<0.05). The Barley-legume mixed sowing and increasing application levels of fermented cattle manure also significantly enhanced (P<0.05) feeding capacity of organic Hanwoo (head/ha) having 450 kg body weight with 400 g of daily gain. Findings of present study indicated that barley-legume biculture not only cut nitrogen application level of fermented cattle manure by over 50 kg per ha but also increased their feed value and productivity of forage as compared to WCB monoculture. This would be contribution to the diversity of forage resources as well as production of organic animal product by creating low cost and high quality organic forage.