• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.193-201
• /
• 2011

The provision of traffic information plays an important role in increasing social benefit not only by saving travel time for individuals but also by improving the efficiency of road operation. VMS(Variable Message Sign) helps on-wheel drivers easily understand the road situation, and also provides real-time traffic information to people on the streets. However, it has not been sufficiently studied on how traffic information based on VMS influences on the drivers' selection of route. This study investigated how drivers use VMS traffic information and how they are satisfied with it. Then, the model of drivers' route selection was specified with the types of traffic information and the expected travel time to examine the influence on the selection of drivers' route. The model was estimated and analyzed in three types according to the condition of detour roads, and the rate of route change and the degree of sensitivity was calculated from the estimation. The results of analysis are as follows. the $1^{st}$ type model showed the 10% of route change for the travel time saving of 5minutes, and the 81.6% of route change for the travel time saving of 20minutes. The $2^{nd}$ type led to the range of route change from 14.2% to 92.7% over the 5 through 20 minutes of travel time saving. The $3^{rd}$ model resulted in the 99.1% of route change. The sensitivity of route change showed the highest for the travel time saving of 11 minutes with the $1^{st}$ type model, 9 minutes with the $2^{nd}$ type model, and 5 minutes with the $3^{rd}$ type model respectively.

• The Korean Journal of Applied Statistics
• /
• v.16 no.2
• /
• pp.203-215
• /
• 2003

In order to provide the drivers with more reliable transportation information in NHTMS(National Highway Transportation Management System), it is important to estimate the expected passage time by using the traffic volume and speed. In this study, we analyze the characteristics of the traffic volume in the national highway and we investigate two real-time adjustment methods: the average adjustment method and the auto-regressive adjustment method. In addition, we compare them using the real data collected at the National Highway Route 3 in 2000.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.61-70
• /
• 2008

The study proposed a new type of bus information, Real-time Bus Crowdedness (RBC) information, to meet various demands of users and improve the convenience level of using public transportation, while existing bus information provided by bus information systems(BIS) were limited to bus operating information such as predicted bus arrival time. To analyze the impacts of providing the proposed RBC information, stated preference(SP) survey was performed and a methodology of disaggregate analysis (e.g., binary logit) was applied to develop passenger choice models. Additionally, passenger choice models incorporating the heterogeneity of different user groups(i.e., by age or trip purposes) were developed to evaluate the different responses on RBC information. The results showed that providing RBC information was significantly related to users' bus choices and the responses of user groups were significantly different, especially the age group of more then 60 was most affected by the RBC information on their bus choices. Also trip purposes were significantly related to users' bus choices, for instance the impacts of providing RBC information was bigger for non-business trips(leisure/meet friend/personal business, shopping, hospital) compared to business trip.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.121-132
• /
• 2007

This paper addressed the issue of a generalized cost model for transit assignment. The model composed of walk time, waiting time (including transfer waiting time), line-haul time, transfer walk time, and fare. The weights of each component were supposed to be calculated using the stated preference (SP) data, which were collected prudently in order to reflect reality. The marginal rate of substitution and wage rate were applied to calculate the weights. The results showed that the weight of walking time per in-vehicle travel time (IVTT) was 1.507, the weight of waiting time (per IVTT) was 1.749, that of transfer time (per IVTT) was 1.474, and that of fare (per IVTT) was 1.476 for trips between inner-city areas in Seoul. Weights for each component were identified as 1.871, 1.967, 1.015, and 0.857, respectively, for trips between Seoul and Gyeonggi. Statistical significance existed between two cases and each variable was also statistically significant. Transit assignment using the relative weights estimated in this study was implemented to analyze the travel index in a macroscopic and quantitative basis. The results showed that average total travel times were 30.23 minutes and 63.29 minutes and average generalized costs were 2,510 won and 3,880 won for trips between inner-city areas in Seoul and between Seoul and Gyeonggi, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1525-1534
• /
• 2014

In recent years, the passengers are likely to decide their route on impulse due to the development of the integrated public transport system, and real-time information system. Especially, public transport fare integration in Seoul Metropolitan area, 2004 makes them not to have resistance about changing the modes or routes and their route choice is most effected by the degree of congestion. Assignment model have limitations to describe route changes by congestion. In this study, the concept of a link cost function used in road assignment and Effective frequency is introduced to describe the passengers' behavior when the capacity of public transport is over and the waiting time variation. Two situations, new transit line operation and accident, are set up to validate the model, as a result of the transit assignment by this model, the traffic on networks is not over the capacity. It is expected that this study will be of help to reflect the various behaviors in transit assignments.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1851-1861
• /
• 2014

This study aims to calculate reliable sectional travel speeds with the consideration of the characteristics of the probe data collected in the interrupted traffic flow. First, in order to analysis the characteristics of the probe data, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle collected by DSRC. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. However, The comparison results show that the sectional travel speeds from the DSRC probe vehicles are not significantly different. Finally, based on the distribution characteristics of the sectional travel speeds of each probe vehicle and the representative values counted during a collection period, we drew the optimal outlier removal procedure and evaluated the estimation errors. The evaluation results showed that the DSRC sectional travel speeds were found to be similar to the observed values from actually running vehicles. On the contrary, in the case of the sectional travel speeds of intra-city bus, it was analyzed that they were less accurate than the DSRC sectional travel speeds. In the future, it will be necessary to improve BIS process and make use of the travel information on intra-city buses collected in real time to find various ways of applying it as traffic information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.78-88
• /
• 2014

Now, UTIS collects and provides traffic information by building RSE 1,150(unit) and OBE about 51,000(vehicle). it's inevitable to enlarge traffic information sources which use to improve quality of UTIS traffic information for Stabilizing UTIS's service. but there are missing data sections. And, In this study as a way to overcome these problems, based on BIS(Bus information system) installed and operating in the capital area to develop normal vehicle's link transit time estimation model which is used realtime collecting BMS data, we'll utilize the model to provide missing data section's information. For these problem, we selected partial section of suwon-city, anyang-city followed by drive only way or not and conducted model estimating and verification each of BMS data and UTIS traffic information. Consequently, Case2,4,6,8 presented highly credibility between UTIS communication data and estimated value but In the Case 3,5 we determined to replace communication data of UTIS' missing data section too hard for large error. So we need to apply high credibility model formula adjusting road managing condition and the situation of object section.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.347-356
• /
• 2014

Passenger cars occupy about 74% among registered vehicles in Korea and the ratio of transportation mode sharing is approximately 60% in the passenger transport part. However, there is no statistics related to travel characteristics of passenger cars, and official statistics are estimated from O/D travel data. Thus, National Transportation DataBase Center in KOTI has attempted to construct various statistical data through Korea Vehicle Use Survey. Based on these data, Analysis of Variance (ANOVA) was conducted to investigate the differences in travel characteristics of each analysis group. As a result, all of the explanatory variables(weekday vs. weekend, metropolitan area vs. non-metropolitan area, male vs. female, commute time vs. other time, routine purpose vs. non-routine purpose) were found to be different across households. In addition, travel distances per trip of weekday, metropolitan area, male, commute time, and non-routine purpose are longer than the opposite variables. Also, the trip distances of small size(1 to 2 persons) households are shorter compared to large size(more than 5 persons) households.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2017

This study propose a method to predict the bus arrival time by considering the signal delay time which is an element which can not be considered in the current bus arrival prediction information generation algorithm. In order to consider the signal delay time, travel time is divided into three components: service time, cruising travel time, and signal delay time. Signal delay time was estimated using intersection arrival time and TOD. The results show that most of the errors that occurred in predicting the arrival time are within about 30 seconds. Some of the estimates have large errors due to the nature of this methodology that uses the estimated value of the intersection arrival time rather than the observation value. It is also difficult to predict the arrival time of the express buses using this method. Future studies such as improving this through real-time location information will greatly improve the accuracy of the methodology.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.548-559
• /
• 2019

Purpose: Analysis method of V2I data driven motorway service area usage behavior to cope with manpower survey. Method: Segmentation of traveling state group and boundary using the distribution characteristics of traveling speed data of individual vehicles. Result: As a result of the verification, the use rate of resting places in lunchtime surged, and the boundary between the distribution status of the traffic speed data was clearly or unclear. Conclusion: The effect of the cost reduction is big because it can cope with the use of rest area survey by manpower and there is no limit in the time and space range of investigation. The dynamic utilization rate of each time sequence, such as a service area/drowsiness shelter/simple service area, with a V2I system, can be calculated. Identify illegal parking on highway section. Identify the unexpected situation in the road section. Identify the real-time service area utilization rate and congestion information.