• (The)Study of the Eastern Classic
• /
• no.68
• /
• pp.173-208
• /
• 2017

This study sorted out the political methods of the typical shell-and-bone inscriptions during early Western Zhou, the shapes and arrangements of Chan, Chak, and Jak, and the characteristics and description methods of shell-and-bone characters and also investigated the formation backgrounds and changing patterns of shell-and-bone inscriptions with a focus on the transmitted literature and actual shell-and-bone inscriptions. First, the transmitted literature contained records saying that Gogongdanbu told fortunes by burning tortoise shells during Proto-Zhou, but no Bokgap from those days had been excavated yet. The content of the divination focused on the periods of Kings Wen, Wu, and Cheng of Zhou, and the shell-and-bone characters of Juwon contained much content about Jugong those days. Second, there were some differences in the processing methods between Bokgap and Bokgol, but their origin could basically be found in the Joyeongjang form during middle Shang. In addition, it was found that they directly accepted the Bukchon type of Seomseo during late Shang and the divination method of the Proto-Zhou culture. Third, all of Bokgaps had a set of square Chan and rectangular Chak installed on the back, whereas all of Bokgols had a set of circular Chan and vertically thin Chak and were in the shape of a cat's eye. In terms of the Chan, Chak, and Jak arrangement, the Bokgaps were similar to those of Yinxu during late Shang, whereas the Bokgols had the characteristics of the Joyeongjang type during middle Shang. Finally, there were differences in the description methods of shell-and-bone characters according to the arrangement methods of shell-and-bone inscriptions. Some rules were found according to each of the parts. Bokgaps were placed horizontally so that Gapsu would face sideways. The middle sections of Bokgols were mostly placed horizontally with the Byeongbu and Seonbu facing downwards at Golgu to write downwards from right to left. This method was estimated to have something to do with "Sigo" in the divination process in The Rites of Zhou. It was inferred that the perceptions of divination changed in the process of arranging the rites and music institutions during early Western Zhou.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.220-239
• /
• 2019

According to the National Currency (國幣) article in GyeongGukDaeJeon (經國大典), the ChoSonT'ongPaeJiIn (朝鮮通幣之印) was a seal that was imprinted on both ends of a piece of hemp fabric (布). It was used for the circulation of hemp fabric as a fabric currency (布幣). The issued fabric currency was used as a currency for trade or as pecuniary means to have one's crime exempted or replace one's labor duty. The ChoSonT'ongPaeJiIn would be imprinted on a piece of hemp fabric (布) to collect one-twentieth of tax. The ChoSonT'ongPaeJiIn (朝鮮通幣之印) was one of the historical currencies and seal materials used during the early Chosun dynasty. Its imprint was a means of collecting taxes; hence, it was one of the taxation research materials. Despite its value, however, there has been no active research undertaken on it. Thus, the investigator conducted comprehensive research on it based on related content found in JeonRokTongGo (典錄通考), Dae'JeonHu-Sok'Rok (大典後續錄), JeongHeonSwaeRok (貞軒?錄) and other geography books (地理志) as well as the materials mentioned by researchers in previous studies. The investigator demonstrated that the ChoSonT'ongPaeJiIn was established based on the concept of circulating Choson fabric notes (朝鮮布貨) with a seal on ChongOseungp'o (正五升布) in entreaty documents submitted in 1401 and that the fabric currency (布幣) with the imprint of the ChoSonT'ongPaeJiIn was used as a currency for trade, pecuniary or taxation means of having one's crime exempted, or replacing one's labor, and as a tool of revenue from ships. The use of ChoSonT'ongPaeJiIn continued even after a ban on fabric currencies (布幣) in March 1516 due to a policy on the "use of Joehwa (paper notes)" in 1515. It was still used as an official seal on local official documents in 1598. During the reign of King Yeongjo (英祖), it was used to make a military service (軍布) hemp fabric. Some records of 1779 indicate that it was used as a means of taxation for international trade. It is estimated that approximately 330 ChoSonT'ongPaeJiIn were in circulation based on records in JeongHeonSwaeRok (貞軒?錄). Although there was the imprint of ChoSonT'ongPaeJiIn in An Inquiry on Choson Currency (朝鮮貨幣考) published in 1940, there had been no fabric currencies (布幣) with its imprint on them or genuine cases of the seal. It was recently found among the artifacts of Wongaksa Temple. The seal imprint was also found on historical manuscripts produced at the Jikjisa Temple in 1775. The investigator compared the seal imprints found on the historical manuscripts of the Jikjisa Temple, attached to TapJwaJongJeonGji (塔左從政志), and published in An Inquiry on Choson Currency with the ChoSonT'ongPaeJiIn housed at the Wongaksa Temple. It was found that these seal imprints were the same shape as the one at Wongaksa Temple. In addition, their overall form was the same as the one depicted in Daerokji (大麓誌) and LiJaeNanGo (?齋亂藁). These findings demonstrate that the ChoSonT'ongPaeJiIn at Wongaksa Temple was a seal made in the 15th century and is, therefore, an important artifact in the study of Choson's currency history, taxation, and seals. There is a need for future research examining its various aspects.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.70-99
• /
• 2021

Yeong-am's 'Jeongwon (貞元)' stone monument, designated as the Jeollanam-do Cultural Heritage, is considered to be the oldest of the epigraphs in Jeollanam-do. Immediately after the discovery, the possibility of it being a Maehyangbi of Memorial Inscriptions was mentioned and attracted attention. However, there is an absolute age of the 'Jeongwon (貞元) of 2 years' (786), so despite it is a relatively early epigraph (金石文), there are not many papers on the theme related to this stone monument. I believe that this stone monument is a Maehyangbi (埋香碑). While reviewing and comparing the results of the existing research, I decoded the text from the 42nd character of the 4th line. As a result of the review, that was conducted, it was confirmed that this stone monument is truly a Maehyangbi (埋香碑). In particular, it was recorded in the literature of the late Joseon Dongguk-myungsanggi (東國名山記) that the letters of the Maehyangbi (埋香碑) are not recognizable. However, it is clearly stated that this stone monument is a Maehyangbi (埋香碑). Although there is no common expression for 'bury (埋)' or 'incense burial (埋香)' in the traditional Maehyangbi (埋香碑), which were popular in the late Goryeo and early Joseon Periods, it can be seen that it is a Maehyangbi (埋香碑) from the words "hide (呑藏)" and "10 bundles of fragrant incense (合香十束)" that are engraved on the stone monument with the name 'Jeongwon.' In other words, it is thought that it meant 'hide (呑藏)' instead of 'bury (埋)'. Circumstantial evidence for the monument of Jingamseonsa (眞鑑禪師), built in 888, contains the an epigraph from the Unified Silla Era. There is a phrase on it that says 'Plant incense on the shore (海岸植香)' on the monument of Jingamseonsa (眞鑑禪師), and it conveys its meaning without using the character 'bury (埋)'. As a result of the absence of the character 'bury (埋)' on the stone monument with the name 'Jeongwon', it is not considered as a Maehyangbi (埋香碑). However, there is evidence that the stone monument with the name 'Jeongwon (貞元)' is in fact a Maehyangbi (埋香碑) and it is also in the Geumpyoseok (禁標石; Forbidden Stone) around Gukjangsaeng (國長生) and at the entrance of Dogapsa Temple (道甲寺). The letters written on the gold sign suggest the possibility that the charcoal used to burn incense (香炭) at the royal tombs of King Jeongjo (正祖) was produced around at Dogapsa Temple (道甲寺) in Wolchulsan (月出山). Since the charcoal used to burn incense (香炭) is naturally related to incense (香), it has been shown that the area around Wolchulsan, where Dogapsa Temple is located, has a long history related to incense (香). The letters visible on the stone monument, the record of Dongguk-myungsanggi (東國名山記) in the late Joseon Dynasty, and the letters on the Geompyoseok (禁標石; Forbidden Stone), all show that the stone monument with the name 'Jeongwon (貞元)' is a Maehyangbi (埋香碑). Considering the fact that the earliest Maehyangbi (埋香碑) in existence is the Maehyangbi (埋香碑) in Yeongam (靈巖) Ippam-ri (笠巖里), which has two dates from 1371 at the end of Goryeo and 1410 at the beginning of Joseon, the stone monument with the name 'Jeongwon' which was set up in 786, would be the oldest Maehyangbi (埋香碑) that we know of. In addition, there is a historical significance in that the Maehyangbi (埋香碑) is proven in the record of Dongguk-myungsanggi (東國名山記), a document from the late Joseon period.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.6 s.73
• /
• pp.725-736
• /
• 2004

A new type of girder, called steel-confined prestressed concrete girder (SCP girder), has been developed, which maximizes the structural advantages of concrete, steel, and PS tendon, and improves on the shortcomings of steel plate girder, PSC I-girder, and preflex girder bridge for use in the construction of middle- or long-span bridges. To verify the propriety of design, structural safety, and applicability of this girder, a static load test was carried out (Kim et al.., 2002). Since the main damage typically sustained by steel bridges results from the fatigue caused by the repetition of traffic loads, fatigue safety must therefore be guaranteed in applying the SCP girder in the construction of real bridges. In this study, a fatigue test was carried out to investigate fatigue behavior and provide basic data for fatigue design. Based on the fatigue test, the fatigue safety of the girder was estimated. For the fatigue test, 10-m specimens were designed for a standard-design truckload (DB-24). A static load test was also performed before the fatigue test to analyze the structural behavior of the specimens. After the fatigue test, outer steel plates were removed to observe the condition of the concrete in the girder.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.123-134
• /
• 2008

Since the end treatments of guardrails installed on domestic roads have the shapes which can easily penetrate and turnover a vehicle, the occupant can be subjected to severe injury when a vehicle impacts the end treatments. In this study, the criteria of performance evaluation for end treatments are suggested which are suitable to domestic road circumstances. Based on the investigation for the installation and studies instances of end treatments, the mechanism of end treatments is examined and the new end treatment suitable to domestic road circumstances is suggested. The suggested end treatment was verified by computer simulation using d LS-DYNA programs and satisfied the suggested performance evaluation criteria for end treatments. And the developed end treatment was verified by full-scale vehicle crash test and satisfied the following three primary appraisal factors of the suggested performance evaluation criteria for end treatments; occupant risk criteria, structural adequacy, and after-collision vehicle trajectory. This study is the first to develop end treatments considering the occupant safety in Korea. Therefore, If the developed end treatments is installed on roads and highways, it can be expected that it will reduce the grave situation of end treatment accidents and increase the safety of roads.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.533-540
• /
• 2012

Rubber laminated bearings with lead core are highly affected by changes in temperature because key materials which are rubber and lead have temperature dependencies. In this study, two full scale LRB(D800, S=5) are manufactured and temperature dependency tests on shear properties are accomplished. The shear properties at the 3rd cycle are used at $-10^{\circ}C$, $0^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$ respectively. The double shear configuration, simultaneously testing two pieces, is applied for compression shear test in order to minimize the friction effects due to the test machine, described in ISO 22762-1:2010. Characteristic strength, post-yield stiffness, effective stiffness, equivalent damping ratio are estimated and presented coefficient due to the temperature changes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.733-741
• /
• 2013

This is the first paper on the combustion characteristics of landfill gas in a constant volume combustion chamber for a large displacement volume commercial engine, and it discusses the fundamental characteristics of fuel from the viewpoint of thermochemistry and thermodynamics and compares these results with experimental ones. The results show that the final pressures obtained from theoretical analysis vary under the same heating value owing to the change in the constant volume specific heat owing to the difference in the burned gas composition according to the fuel gas compositions; furthermore, the stoichiometric ratios and trends of analytical and experimental pressures coincide very well, although some minor differences are observed between the two. The root cause of the difference is the heat transfer, which changes the specific heat and lowers the temperature considerably, in the real combustion process. In addition, the large chamber volume and ignition position promote the heat transfer to the wall. Finally, the fuel conversion efficiency increases as the methane mol fraction decreases, and it is maximum when the stoichiometric ratio ranges from 0.8 to 0.9. These increases due to the composition and stoichiometric ratio could sufficiently compensate the decrease due to the specific heat ratio drop, LFG might be more advantageous than pure methane in a real engine.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2012

In this study, practical verifications for an advanced C.I.P(Cast in Place Pile) construction method were carried out. The structural characteristics of the method is to attach an angular joint in the steel-casing. This joint plays an important role in boring vertically, connected pile to pile, and protects the permeation of the ground water. For verifications, experimental research and numerical analysis were performed. In the experimental research, two model-tests were set up with the real scale steel-casing. One is to examine the leakage in the joint of piles and the other is to compare earth pressures in the front and the joint, respectively. In addition, 3 point bending test and compressive loading test were carried out and numerical analysis was performed to simulate the loading test. As a result of model-tests, the leakage in the pile joints was not shown up to 300 KPa of water pressure and stress concentration in the joint is out of the question. From the results of bending and compressive test, it was found that the new advanced C.I.P method is more convenient and superior than the conventional method.

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.313-332
• /
• 2013

Large tundra of the Russian Empire, has rich resources and science and technology, and a huge domestic market potential is rapidly changing. Based on the abundant energy resources such as oil, gas, and minerals, as foreign trade is active, the huge capital is moving. And commitment the active SOC by improving laws and regulations and changes in the structure of the Russian economy. One of them pushed the WTO since 1993, 19 years to see fruition join the WTO (World Trade Organization). As the official entry into force August 22, Russia, July 10, 2012, Congress passed the treaty after joining the WTO and of the 156th WTO member countries, was officially join. As the WTO, Russia has the world's 11th-largest economy in the steel tariffs from 30% to 15% are exported to Russia, South Korea Car TV parts from 10% to 0%, reduced from 20% to 5% Korean export companies to export to Russia, etc., is expected to become the new land of opportunity. Russia hopes the changes improve the investment environment, the service industry, manufacturing revitalization the macroeconomic sectors of the economy through the WTO, and forecast, but the consumption increased revenue due to tariff cuts, falling import prices and the real economy, and weak manufacturing base. On the one hand, the perspective of concern. In conclusion, Russia joining the WTO, and the feed to improve the fairness and transparency of the market opening, the Russian advance in Korean companies be facilitated and strong complementary cooperation, especially in manufacturing is expected. In this paper, after Russia joining the WTO, trade liberalization, and ready for a new era of economic cooperation between Korea and Russia, at the point of expanding openness to propose strategies to analyze the problems of Korean companies during the Russian advance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.119-126
• /
• 2005

The objective of this paper is to evaluate the flexural tensile strength of unreinforced concrete masonry wall to ensure the structural safety in out-of-plane behaviors under the wind or earthquake loads. Flexural tensile strength of unreinforced concrete masonry wall has been obtained from the full scale tests of total 327 specimens and the statistical analysis are performed for each of the cases. The flexural tensile strength derived from experiments is classified as 13 groups according to masorny units, mortar ingredients, and the direction of tensile stresses and the mean tensile strength and the variable coefficient are obtained for each case. The uniform and concentrated transverse loads have been applied over the face of the wall specimens. The ultimate mean flexural tensile strengths are distributed from 1,564 kPa to 363 kPa according to masonry units, mortar ingredients, and other factors. The allowable flexural tension stress criteria will be established based on the mean flexural tensile strengths in the future.