• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 1999.03a
• /
• pp.60-61
• /
• 1999

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.63-72
• /
• 2012

In contemporary times, "environmental designers" need to consider both exterior and interior aspects because of the growing trend in dissolution between exterior and interior spaces. To quantify "spatial sense" which serves as the standard for environmental design, this study has asked 63 subjects to evaluate 15 interior and 14 exterior spaces. The "spaciousness (small-large)", "openness(closed-open)", "warmness(warm-cold)", "brightness(bright-dark)", "softness(soft-hard)", "spatial intimacy" and "frequency of visit" were adopted as variables of spatial sense. Through the analysis of these variables, this study could gain the difference between spatial sense for exterior and interior environments, quantify the spatial sense that physically and psychologically appropriates to human beings. The result of this study can be summarized as follows: Twice the amount of spaciousness was observed between the interior and exterior spaces. And the standard on intimate space is established with W/H ratio of 5.71 and high Window/Wall Area ratio in the interior and an area of 3,800m2 and a W/H ratio of 5.57 in exterior. The difference between the spatial sense in the interior and exterior space is mostly dependent on the psychological sense. The increase of physical size caused by the interior space to be perceived as cold, dark and hard psychologically, but exterior space to be perceived as warm, bright and soft. Psychological senses, especially softness, affect spatial intimacy to the greatest extent among the given variables. As the psychological senses for interior spaces were largely independent from the given space's size and perceptive senses, the size of the interior space, which exhibited spatial intimacy, could not be deduced. In comparison to this, due to the high dependency between the psychological senses for exterior spaces and the given space's size and perceptive senses. The study also showed that interior and exterior spaces have relatively different spatial sense and physical standards. Such research results are predicted to provide applicable standards for environmental designers for exterior and interior spaces in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.733-740
• /
• 2008

In this paper, an indoor propagation model based on 3d ray tracing is presented for wireless communications. In case of indoor propagation models, various radio propagation paths such as wall-transmitted wave and scattered wave from ceilings, pillars, and furnitures arises and 3-D formulation is needed. To accommodate such scatterers, objects are modeled by triangulated surfaces and ray tubes using those surfaces are introduced and efficient calculation methods using the tubes are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6C
• /
• pp.611-618
• /
• 2009

Recently, an indoor location-aware technology has been focused on as a key technology for context awareness in ubiquitous computing environments. The conventional Cricket system was designed with a non-centralized architecture, which has advantages in terms of user privacy, deployment, scalability, decentralized administration, network heterogeneity, and low cost. In this paper, an indoor location system based on TDOA between RF and ultrasound signals is designed, which improves the Cricket system. A 2.4GHz frequency is employed for transmitting RF messages, which is in an ISM band. The beaconing frequency is doubled to enhance the channel utilization rate. The ultrasonic pulse duration is optimized to increase the coverage of ultrasonic signals. The function of calculating location coordinates is embedded in a listener. The location-update rate and location accuracy are also improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2141-2152
• /
• 1998

In this paper, we design and implement an indoor wireless modem using small signal of ISM band regulation, which can tranceive reliable data streams. We use direct sequence spead spectrum (DS-SS) signaling with synchronous BPSK and QPSK modulation, convolutional coding with viterbi decoding. The radio frequency module uses frequency devision duplexing in 900 MHz band, and the digital module is implemented with FPGAs for the purpose fo ASIC design. The perfomrance of our own acquistion and tracking circuit consisting digital matched filter and decision logic is proved by experiments, and the possibility of file transfer at indoor environment with the entrie system that the modem is connected the PC through RS-232C port is verified.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.277-284
• /
• 2018

For the main variables to be selected by the designer for the heating and cooling load calculation in greenhouses, in order to evaluate the effect of these design values on the heating and cooling load, the simulations were carried out by varying the respective design values. Based on these results, we proposed the design values which should pay special attention to selection. The design values which have the greatest effect on the heating load were the overall heat transfer coefficient of the covering material and the design outdoor temperature was next. The effect of the design values according to the number of spans showed little difference. In the case of the single-span greenhouse, the effect of the design values related to the underground heat transfer can not be ignored. However, in the case of the multi-span greenhouse, the effect of the design values related to the underground heat transfer and the infiltration rate were insignificant. The design values which have the greatest effect on the cooling load were the solar radiation into the greenhouse and the evapotranspiration coefficient, followed by the indoor and outdoor temperature difference and the ventilation rate. The effect of the design values showed a great difference between the single-span greenhouse and the multi-span greenhouse, but there was almost no difference according to the number of spans. The effect of the overall heat transfer coefficient of the covering material was negligible in both the single-span greenhouse and the multi-span greenhouse. However, the effect of the indoor and outdoor temperature difference and the ventilation rate on the cooling load was not negligible. Especially, it is considered that the effect is larger in multi-span greenhouse.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.627-636
• /
• 2023

Due to the COVID-19 pandemic, the global population has experienced drastic changes, one of which is the increase in remote work. Given the ongoing possibility of exposure to infectious diseases and various other circumstances, the expansion of remote work is anticipated. To enhance the efficiency of remote work and address its existing limitations, this study surveyed the perceptions of indoor environments among individuals who worked from home during the COVID-19 pandemic. The study examined how the characteristics of individuals influenced their perceptions of indoor environments. It was found that the number of occupants and rooms, size of the house, and noise sensitivity affected the perceptions of outdoor noise, neighbor noise, and indoor noise caused by cohabitants. The findings can be used as foundational data for designing multipurpose housing that can be utilized not only for residential purposes but also for work and educational settings in the future.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.5
• /
• pp.353-358
• /
• 2013

In this paper, we present an implementation of indoor flight to navigate to the designated places capable of hands-off autonomous operation within indoor environments. Our flight requires computer vision technique and smartphone device to allow it to be flown indoors without high-performance sensors which are too expensive to commercialization. The experimental result show that proposed implementation is fairly meaningful in a general building.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2143-2147
• /
• 2009

최근 전 세계적 이상기후로 인한 가뭄 또는 집중호우에 따른 하천의 건천화 및 홍수범람은 국가의 인명 및 재산에 상당한 피해를 야기 시키고 있으며 이로 인한 하천환경의 급격한 변화는 생태파괴의 주된 원인이 되고 있다. 따라서 제방의 안정성을 확보하며 유로를 제어할 뿐만 아니라 퇴적 및 세굴 등에 의한 하상고의 변화를 최적화할 수 있는 기법이 요구되는 실정이다. 이와 같은 제방과 하도의 안정성 확보를 위한 구조적 대책으로 수제가 많이 알려져 있으나 국내에서는 제한적인 연구와 극히 소수의 수제설치가 시도되었을 뿐 실용화를 위한 요소기술 개발이 부족한 실정이다. 본 연구에서는 국내외의 수제 실내실험 및 설치사례조사를 통하여 각 국의 친환경적 하천관리 방안에 관한 수제설치 형태 및 기법을 검토하였다. 본 연구에서는 국내의 연구 및 설치사례조사는 물론 유럽, 미주 및 아시아의 수제 실내실험 및 설치사례조사와 수제설치에 따른 수리학적 변화양상 및 설계가이드라인에 관한 자료를 검토하였다. 사례분석을 통해 축적된 자료를 통하여 수제 설치에 따른 개선효과 및 수제의 형태·기법에 따른 수리학적 영향을 검토하였으며 향후 국내 하천별 특성에 적합한 수제형태를 검토하였다. 이상의 검토과정을 통해 수제의 지배 인자를 도출함으로써 각 인자의 영향을 정량화 할 수 있는 지속가능한 수제설계 요소기술 개발을 위한 기초자료를 제공하고자 하였다.