• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1444-1455
• /
• 1999

In the standard location strategy such as IS-41 and GSM, Home Location Register(HLR) and Visitor Location Register(VLR) databases are used to manage the location of mobile terminals. The primary goal that location management schemes investigate is to reduce the cost of database access and the traffic for signaling network. When mobile terminals move frequently, one of problems in the standard location management scheme is that HLR database is highly updated and the traffic in signaling network can be occurred significantly due to high message transfer rate between HRL and VLR. As a solution to these problems, this paper proposes the location management scheme using VLR Gateway(VG) to reduce the both traffics of HLR update and signaling network which are resulted from location registration requirements of mobile terminals whenever they cross their registration area boundary. VG is a kind of database that is placed between HLR and VLR. It integrates one or more registration area defined in a system into one group and plays a role on behalf of HLR in a integrated registration scope so that the call delivery and the movement of mobile terminals are possible without HLR access in the scope. In order to evaluate performance of IS-41 and proposed scheme, we simulate two schemes based on wide range of call to mobility ratio. Its experiment result shows that in the proposed scheme total database cost increased slightly whereas HLR and signaling traffic decreased remarkably.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.73-78
• /
• 2002

In WATM networks, in order to perform dynamic slot allocation required slots of mobile terminals are estimated based on DP (Dynamic Parameter) reflecting characteristics of traffic. In VBR (Variable Bit Rate) traffic, slot allocation is done at MT considering both time-dependent characteristics and QoS (Quality of Service) requirements. In this paper, DPs-buffer state information and buffer state change-are transmitted through in-band signaling. BS (Base Station) performs dynamic slot allocation considering traffic characteristics of each MT (Mobile Terminal), in other words, buffer state information informs the potentiality of 'buffer full state'to BS if MT buffer is over the specific threshold value and buffer state change notifies change in buffer state of incoming cells to MT. If buffer state information is equal to 'low (more than threshold)' and 'abrupt increase' it generates 'buffer full' state cell transmission delay or cell loss might occur. At this time BS should assign additional slots to MT, and then MT consumes cells in its buffer. In simulation, the proposed scheme shows better performance in cell delay and loss than EPSA (Estimation-Prorated Slot Assignment) in-band scheme.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.677-682
• /
• 2001

In a microcell environment having frequent inter-cell movement of a subscriber, the amount of signalling traffic rapidly increases due to the treatment of location update and other necessary actions. As a way to reduce such an overhead, this paper presents an algorithm that dynamically allocates subscribers paging and location areas each of which has a different size and shape, depending on the characteristics of subscriber mobility. Mathematical analysis results show that this algorithm allows reduced area management cost, compared to conventional algorithms.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1667-1676
• /
• 2010

In this paper, we propose a packet scheduling algorithm that assigns different number of HS-PDSCH(High Speed Primary Downlink Shared Channel) to the service user according to the received signal to interference ratio of CPICH(Common Pilot Channel) and to the traffic characteristics. Assigned channel number is determined by the signal to interference ratio level from CPICH. The highest signal to interference ratio user gets the number of channels based on the signal to interference ratio table and the remained channels are assigned to the other level users. Therefore the proposed scheme can provide the similar maximum service throughput and higher fairness than existing scheduling algorithm. Simulation results show that our algorithm can provide the similar maximum service throughput and higher fairness than MAX C/I algorithm and can also support the higher service throughput than proportional fairness scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.556-560
• /
• 2013

Recently, solutions to accommodate explosively growing mobile data traffic have attracted intensive attentions since the emergence of high-performance smartphones. Spectrum which can be exploited for mobile communications is very limited. Thus, femto cell is considered as an alternative because it can efficiently offload mobile data traffic from macro cells without using additional spectrum. In this paper, we mathematically analyzed the coverage of femto cell when it is deployed in an area where there exists signals from existing macro base stations. Our numerical results indicate that the coverage of femto cell increases as the total power of femto cell increases or the ratio of power allocated to pilot channel increases. However, it is also shown that the coverage of femto cell is very limited despite its high power when interference signals from macro base stations are strong.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.136-142
• /
• 2006

Existing buffer management schemes for shared-memory output queueing switches can be classified into two types: In the first type, some constant amount of memory space is guaranteed to each virtual queue using static queue thresholds. The static threshold method (ST) belongs to this type. On the other hand, the second type of approach tries to maximize the buffer utilization in 머 locating buffer memories. The complete sharing (CS) method is classified into this type. In the case of CS, it is very hard to protect regular traffic from mis-behaving traffic flows while in the case of ST the thresholds can not be adjusted according to varying traffic conditions. In this paper, we propose a new buffer management method called weighted dynamic thresholds (WDT) which can process packet flows based on loss priorities for quality-of-service (QoS) functionalities with fairly high memory utilization factors. We verified the performance of the proposed scheme through computer simulations.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.73-78
• /
• 2004

There are random, continuous, and periodic allocation methods in the time slot sequence integrity for the multi-slot call. In the T-S-T switch, there are 2 time switch and the 2*2 space switch. Three time-slot allocation methods are suggested for the simulation. In the simulation, the searching times for time-slots on a multi-slot call is chosen to 32, and the simulation time is chosen to 100,000 seconds. Three kinds of calls are supposed for a multi-slot call : one time-slot call, two time-slot call, and 6 time-slot call. In the simulation, the carried traffic and the blocking probability are calculated on the 3 different traffic cases of 8:1:1, 6:2:2, 4:3:3(one time-slot : two time-slot : 6 time-slot) multi slot calls. It is shown that the blocking probability for the periodic time slot allocation method is best. As a result, the periodic time-slot allocation method is the proper one for the multi-slot ATM switch.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.593-602
• /
• 2006

This paper propose to methodology for deciding suitable bit size that minimizes hardware complexity and performance degradation from floating-point design the fixed-point implementation of downlink traffic channel of IEEE 802.16e OFDMA TDD system. One of the major considering issues for implementing fixed-point design is to select Saturation or Quantization properly with the knowledge of signal distribution by pdf or histogram. Also, through trial and error, we should execute exhaustive computer simulation for various bit sizes, hence obtain appropriate bit size while minimizing performance degradation. We carry out computer simulation to decide the optimized bit size of downlink traffic channel under AWGN and ITU-R M.1225 Veh-A channel model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.60-64
• /
• 2006

In typical video streaming services such as MPEG encoded video, the transmission data sizes change depending on the frame types and the required bandwidth for QoS support also changes as time passes. Accordingly, in video streaming services using the Internet it could happen that the video services stop occasionally due to instantaneous deficiencies of the required bandwidth under unexpected congestion even if the highest priority is allocated to the service by network administration. In this paper, we investigate several methods for bandwidth allocation and traffic engineering to support MPEG video traffic and propose a new method to reduce the transmission delay and enhance the throughput, there by provisioning the QoS requirements. In the proposed scheme, LSPs are established based on temporal variation patterns of the Internet traffic and the CQ_LLQ policing scheme is applied for traffic shaping at the ingress routers. Finally we verified the performance of the proposed scheme via computer simulations using OPNET.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.11-19
• /
• 2010

ZigBee is a standard for wireless personal area networks(WPANs) based on the IEEE 802.15.4 standard. It has been developed for low cost and low power consumption. There are two alternative routing schemes that have been proposed for the ZigBee standard: Ad-hoc On-Demand Distance Vector(AODV) and tree routing. The tree routing forwards packets from sensors to a sink node based on the parent-child relationships established by the IEEE 802.15.4 MAC topology formation procedure. In order to join the network, a sensor node chooses an existing node with the strongest RSSI(Received signal strength indicator) signal as a parent node. Therefore, some nodes carry a large amount of traffic load and exhaust their energy rapidly. To overcome this problem, we introduce a new metric based on link quality and traffic load for load balancing. Instead of the strength of RSSI, the proposed scheme uses the new metric to choose a parent node during the topology formation procedure. Extensive simulation results using TOSSIM(TinyOS mote SIMulator) show that the CFR scheme outperforms well in comparison to the conventional tree routing scheme.