• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.466-469
• /
• 2009

본 논문에서는 T-DMB 시스템에서 위치인식을 위한 워터마킹 기법에 대해 소개하고 성능을 분석하여 보았다. T-DMB 방송용 전송신호에 확산 코드를 이용한 워터마킹 기법을 행하는 기술은 방송용 송신기를 식별하는 기능을 목적으로 사용되고 있다. 송신기 식별을 위해 GPS 기술이 가장 널리 사용되고 있지만, 전파 신호가 미약하고 음영지역이나 실내에서는 수신이 안 되는 단점이 있다. 이러한 관점에서 볼 때 이용요금이 거의 무료이며, 수신 전계강도는 강하면서 다수의 음영지역문제를 해결해 줄 수 있는 새로운 위치인식기술이 필요한 상황이라고 할 수 있고, 지상파 방송신호를 기반으로 위치인식기능과 부가적 정보를 제공해 줄 수 있는 송신기 식별기술은 새로운 솔루션을 제공한다고 할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.437-438
• /
• 2008

본 논문은 유선 타블렛에서 공진 회로가 적용된 펜의 위치를 알 수 있는 좌표측정 방법을 소개한다. 현재 연구하고 있는 유선 타블렛은 공진회로가 적용된 펜과 루프코일에 라인안테나가 적용된 패드를 사용한다. 공진회로가 적응된 펜을 패드 위에 놓게 되면, 전자기 유도 현상에 의해 발생된 전류를 측정하여 현재 펜의 위치를 알 수 있다. 루프코일에 라인안테나를 설치하면 이를 Differential coil이라고 부르는데 루프 안테나와 라인 안테나 사이에 흐리는 전류를 알 수 있다. 이때 라인안테나를 기준으로 펜의 위치에 따라서 전류량도 변화하며, 또한 라인 안테나를 기준으로 왼쪽과 오른쪽의 전류의 극성이 다르다. 루프회로에 라인안테나를 겹쳐 놓은 형태인 타블렛의 패드는 라인안테나를 순차적으로 변경해 가면서 공진 회로가 적용된 펜에 의해 전자기 유도 현상에 의해 발생된 전류를 측정하게 되며, 이 측정된 값들을 비교하여 좌표를 알아낼 수 있다. 하지만 그 전류의 변화는 아주 적어 직접적인 신호로는 좌표를 알아낼 수 없다. 그래서 우리는 차등증폭을 이용하여 신호를 증폭시켜 신호를 변형한다. 이 변형된 신호를 이용하여 각 라인안테나에서 측정된 전류세기로 좌표를 알아낸다. 이런 연구에서는 전자기 유도현상에 의해 발생된 전류의 세기를 이용해 실제 윈도우 프로그램에서 펜의 위치를 알 수 있는 방법을 찾고, 구현된 모습을 보여준다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.343-346
• /
• 2011

레졸바는 앤코더에 비하여 가격 면에서 유리하지는 않지만 절대위치를 검지해야 하는 경우와 기계적으로 견고해야 하는 장소에서 정교한 제어용으로 사용되고 있다. 레졸바에 의한 위치와 속도검출 방법은 일반적으로 관측기를 응용하고 있으며, 아날로그 신호를 처리해야 하는 부분을 갖고 있다. 본 논문에서는 레졸바의 출력신호를 위치정보인 코사인과 사인파형으로 복조하고 복조된 아날로그 신호를 제어기에 전송하는 방법을 사용하였다. 또한, 제어기의 프로그램에 추정기를 설계하고 극저속에서 그 동작을 관찰하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.80-85
• /
• 1997

Preventive diagnosis technique of power transforms is very important for highly reliable operation of power systems, and especially that of online transformer is needed in view of economy. Acoustic methods for partial discharge points have been studied abroad since 1960's in earnest. Electric-ultrasonic locating method by which partial discharges are found through detecting the electric and ultrasonic signal generated in partial discharge and ultrasonic-ultrasonic locating method by which partial discharges are found through detecting two ultrasonic signal with two ultrasonic sensor have been researched in our country. By using this ultrasonic-ultrasonic locating method, it was proposed of graphical determination technique of partial discharge points one dimension, two dimension, three dimension. But in locating partial discharges, they have assumed that the number of signal origin is one. So in this study we suggests a method of locating and knowing the number of signal origins when there are several origins by using ultrasonic-ultrasonic method.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.697-702
• /
• 2022

For imaging in positron emission tomography(PET), it is necessary to measure the position of the scintillation pixel interacting with the gamma rays incident on the detector. To this end, in the conventional system, a flood image of the scintillation pixel is obtained, the imaged area of each scintillation pixel is separated, and the position of the scintillation pixel is specified and acquired as a digital signal. In this study, a deep learning method was applied based on the signal formed by the photosensor of the detector, and a method was developed to directly acquire a digital signal without going through various procedures. DETECT2000 simulation was performed to verify this and evaluate the accuracy of position measurement. A detector was constructed using a 6 × 6 scintillation pixel array and a 4 × 4 photosensor, and a gamma ray event was generated at the center of the scintillation pixel and summed into four channels of signals through the Anger equation. After training the deep learning model using the acquired signal, the positions of gamma-ray events that occurred in different depth directions of the scintillation pixel were measured. The results showed accurate results at every scintillation pixel and position. When the method developed in this study is applied to the PET detector, it will be possible to measure the position of the scintillation pixel with a digital signal more conveniently.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.15-20
• /
• 2016

In this paper, we developed the hardware GPS signal generator for generating a GPS L1 meaconing signal with Live GPS signal signals and analyzed the performance of meaconing signal generator thorough the experiment. Deception of the signal, such as a re-broadcast, it is an object of the user to provide false information so as not to receive location information and accurate time. The signal just rebroadcast has the features that can be easily deceive the receiver via a delay of no received signal to the signal processing through an antenna. In this paper, the hardware for generating a signal only these rebroadcast designed and manufactured, by re-sending the received Live GPS signals, to confirm the effect of the receiver. The maximum delay time is possible up to about 2.6msec, also, has been successfully tested to be moved to the position of re-broadcasting based on maturity antenna the position of the receiver through a spaced antenna.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.445-450
• /
• 2020

Cooperative networks provides the benefits of performance improvements and capacity increment when the source node transmits signal to the destination node using several relay nodes. In this paper, we consider the cooperative network where the transmission scheme between the source node and relay node use conventional binary signaling, whereas the transmission scheme between thee relay node and destination node adopt the differential space time coding signaling. We analyze the performance of the system depending on the modulation scheme, i.e., coherent and differential modulation, at the source-relay links. The performance depending on the relay location is also compared by considering modulation scheme and the number of relay node.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4569-4573
• /
• 2011

Resolver doesn't have a advantage to price in comparision with encorder. However, resolver is used to the case of detecting a absoluteness position and is used to a fine control in the place of having a stability by mechanic. The position by resolver and the method by speed detecting is applied by observer and have a part of processing analog signal. In this paper, we used the method which output signal of resolver is demodulated by cos and sin waveform and the demodulated analog signal is transmitted to controller. We designed the estimated on the program of a controller and observed the movement on the low speed.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.3-8
• /
• 1999

In this paper, we propose a new active noise control system that cancels the only noise signal from the mixture selectively. A blind source separation realized by a dynamic recurrent neural network is used as a preprocessor of the active noise control system and separates the desired signal and the noise signal. The active noise control system adaptively generates an anti-noise signal to remove the only noise signal separated by the blind source separation. Computer simulation results show that the proposed scheme is effective to construct a selective attention system.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.315-319
• /
• 2012

The aim of this study was to develop a signal process circuit for a position sensitive avalanche photodiode detector. The circuit parts consisted of amplification, differential and peak/hold circuit. This research was the baseline to develop highly compact radiation detector. The signal was amplified by an amplification chip and its shape was changed in a differential circuit to minimize the pulse tailing. The peak/hold circuit detect the peak of the signal from the differential circuit and hold the amplitude of the peak for data acquisition. In order to test the intrinsic function of the circuit, the input signal was transmitted from a commercial pulse generator.