• 한국지형공간정보학회:학술대회논문집
• /
• 2004.10a
• /
• pp.155-160
• /
• 2004

근거리 디지털 영상을 이용하여 도로 사면의 3차원 변형을 효율적으로 측정하고자 하였다. 광속조정법(bundle adjustment)에 근거한 사진삼각측량 방법을 적용함에 있어서 종래의 표준적인 기법과 Free-net 기법으로 각각 처리하여 사면의 약 1/35000의 정확도로 3차원 측정과 변형량을 도출하였으며, 토털스테이션에 의해 측정한 결과와 비교하였다. 연구를 통하여 Free-net 기법을 적용함으로써 복잡한 산업현장에서 기존의 측지학적 기준점측량을 행하지 않고도 신속하고 정확한 측정을 기대할 수 있음을 확인할 수 있었다.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.169-180
• /
• 2007

Applicability of Land-based MMS(Mobile Mapping System) having been increased gradually as digitalization of administrative operation and construction of integrated systems of the government and provincial government are growing up. As these requirements, the case can be occurred that the facilities should be surveyed rapidly in the specific area. At this case, the real time field processing method is more necessary than the post processing method and data processing speed should be an essential element as important as accuracy. In this study, the two space intersection methods used in photogrammetry were programmed and compared with each other to select more proper method for the three dimensional positioning in the field processing. Especially, at the analytic space intersection, the traditional close range terrestrial photogrammetry was modified and applied to that to adapt to MMS's characteristics that camera position and attitude are changed according to the vehicle movement. As a result, the difference of the accuracy between two methods is not significant but at the calculation time, the analytic space intersection is faster three times than the space intersection using collinearity condition.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.77-91
• /
• 2000

Rock joint survey consists of measurement of orientation and face mapping for trace informations. We have developed a new alternative approach called rock joint survey system by stereophotogrammetry and image processing to replace the conventional manual method. For the measurement of orientations and face mapping, we applied a stereophotogrammetry and developed two hybrid approaches using image processing techniques, respectively. These methods have advantages in making it possible to measure the orientations of joints and perform face mapping rapidly and objectively in unaccessible and dangerous areas.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.329-343
• /
• 2000

Rock joint survey consists of measurement of orientation and face mapping for trace informations. We have developed a new alternative approach called rock joint survey system by stereophotogrammetry and image processing to replace the conventional manual method. For the measurement of orientations and face mapping, we applied a stereophotogrammetry and developed two hybrid approaches using image processing techniques, respectively. These methods have advantages in making it possible to measure the orientations of joints and perform face mapping rapidly and objectively in unaccessible and dangerous areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.345-345
• /
• 2020

우리나라는 물산업 강국 도약을 위한 글로벌 경쟁력을 갖추기 위해 2015년 세계물포럼 이후 복합 수재해 대응과 능동적 하천관리 분야가 중요시되고 있다. 기존의 하천관리는 수위관측소 및 하도계획을 중심으로 이루어져왔으나 최근에는 항공측량, 드론 등 원격관리시스템에 기반을 둔 하천 통로에 대한 입체적인 3차원 관리로의 인식 전환이 고려되는 추세이다. 대부분 수위 및 하도를 중심으로 한 조사방식은 계측장비, 인력, 시간 등 많은 소요비용이 필요하게 되어 급변하는 하천 공간 조사 기술로 제한적 요소가 많아 현재의 하천조사 시스템으로는 하천관리에 필요한 데이터를 환경변화에 맞추어 신속하고 정확하게 취득하기가 어려운 실정으로 하천관리 고도화를 위해 필요한 자료를 적기에 신속하고 효율적으로 구축할 수 있는 기술 개발 필요한 실정이다. 사회 환경의 발달로 급변하는 환경에 맞는 적정한 하천관리를 위해서는 유역 및 하천에 대한 수문정보 생산 및 하상변동조사가 필요하고 첨단기술(ICT)을 활용하여 조사의 효율성, 안전성 및 정확성을 높일 필요성이 있다. 한편, 하천유역조사는 하천유역에 대한 다양한 정보 수집을 목표로 하나 그간 유역조사에 대한 체계적인 연구가 이루어지지 않아 수요자의 요구 자료 제공이 미흡한 실정이다. 최근 수심, 하상, 하천재료 등 하천법에 규정된 측량은 현장 직접계측을 통해 실시되고 있으며 측량의 공간적·시간적 범위의 변동으로 기존 방식의 비용이 급증하게 되어 신기술을 통한 효율화가 필요한 실정이다. 현재 하천조사를 위해 위성 및 유인항공기 등 다양한 방법이 활용되고 있으나 고빙용을 수반하고 위성영상은 공간해상도가 낮아 폭이 좁은 하천에 적용하는데 한계가 있다. 또한, 폭이 좁고 길게 형성된 하천의 특성상 항공측량 보다 드론이 효율적으로 드론에 레이저 광선으로 지형을 측량하는 장비를 탑재해 3차원 지형을 측량하는 방법이 유리하다. 따라서 본 연구에서는 동진강 상류 하천을 대상으로 드론을 활용할 경우 투입인력 및 소요시간 절감, 장비 및 인력 진입 불가지역에 대한 정보획득, 높은 공간해상도, 항공측량 대비 경제성이 높은 것으로 판단되어 드론을 활용하여 하천지형 모니터링을 실시하여 유역관리 및 수질모델링에 필요한 지도 생성 및 유역의 공간 정보를 획득하여 향후 유역관리 모형의 기초자료로 활용하고자 하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.301-309
• /
• 1999

Real-time kinematic (RTK) GPS surveying which allows centimeter level accuracy of three-dimensional coordinates without post-processing has become recognized as a major advance in GPS technology. Employing On-The-Fly initialization technique, the RTK system can escape from cycle slip problems that have affected as a main obstacle factor in traditional kinematic and static approaches. The objective of this research was to evaluate accuracy and effectiveness of the RTK-GPS surveying. First, the continuous RTK observation of a base line was conducted for the purpose of finding out the repeatability of the RTK surveying and the results which were then compared against results from static surveying showed RMS errors of $\pm{3mm}\;and\;\pm{13mm}$ for their respective horizontal and vertical components. On a test network of 30 stations covering the small area, the results of RTK testing were compared against those from not only post-processing kinematic and rapid-static surveyings but conventional surveyings and also the efficiency of RTK were analyzed. In addition, geoid heights which were derived by combination of GPS and spirit leveling about all of the points within the network were compared against those derived by the PNU95 and EGM96 models respectively.

• Journal of the Korean Geographical Society
• /
• v.46 no.4
• /
• pp.425-441
• /
• 2011

Ridge traversing trail in Mount Jiri National Park is classified as flat, gully-like, unilateral, and asymmetric bilateral, paths based on a location and gradient of paths. These types are interchangeable due to a drainage condition of trail surfaces. Using a rapid survey, the trail is 135.9 cm wide, 23.6 cm deep and $5.1^{\circ}$ in a gradient, respectively. All treads have been compacted due to human trampling. The path width is affected by a slope aspect and a distribution of Sasa borealis. An asymmetric path is wider than a symmetric path. A soil erosion rate is equivalent to $68.9cm^2/year$ for the period from 1960 to 2009, suggesting that the trail has been widened 2.7 cm/year and the tread lowered 0.4 cm/year. Trampling and needle ice action combined with rainwash induced by a pipeflow are dominant erosion processes contributing to the trail expansion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.121-131
• /
• 1991

This study is about the analysis of the application of non-metric camera to accident sites and aims to present an efficient, an economical and an accurate method of processing accident sites. This was accomplished by observation and accuracy analysis of an experimental model. It can be concluded that by applying the 3-D coordinate system and the bundle adjustment with additional parameters to non-metric cameras, it is possible to achieve an accuracy level of positional values which is similar to that achieved by conventional control surveying and by metric cameras. It was also found that the accuracy of absolute coordinates approached towards the accuracy of metric cameras with the increase of the film size and with the increase of the focal length of the non-metric camera.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.191-198
• /
• 2000

Digital photogrammetry in the implementation of GIS database plays an important role, with the demand for rapid data acquisition and quick updating. Here image matching represents a fundamental task of digital photogrammetry. No image matching algorithm provides a solution as complete as the one given by human vision which is reinforced by knowledge and intelligence capabilities. In this paper, if object space is smooth, we check the global similarity between a possible corresponding point pair and its neighbouring possible corresponding point pairs, detecting blunders; We define matching strength measurement. Besides this, we compute three-dimension coordinates of matching points by bundle adjustment method. Results of the test reveal that the proposed method can eliminate the incorrectly matched pairs efficiently and the accuracy of three-dimension coordinates of matching points come within an allowable error.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.383-390
• /
• 2004

IGS provides so accute a final precise ephmerides which is offered in the 13rd, and it also offers a rapid precise ephmerides for more prompt application and an ultra-rapid precise ephmerides for real-time application. The purpose of this study is to analyze the accuracy of a rapid precise ephemerides and an ultra-rapid precise ephemerides based on a final precise ephmerides and determine the degree of the Lagrange Interpolation which needs to decide the location of a satellite. As the result of this study, the root mean square error of x,y,z coordinates of a rapid precise ephemerides was $\pm$0.0l6m or so, and the root mean square error of an observed ultra-rapid precise ephemerides was approximately $\pm$0.024m. The root mean square error of an ultra-rapid precise ephemerides predicted for 24 hours was $\pm$0.07m or so and the one of an ultra-rapid precise ephemerides predicted for 6 hours was $\pm$0.04m or so. Therefore, I could figure out that it had higher accuracy than a broadcast ephemerides. Also, in case that the location of a satellite was calculated with the method of the Lagrange Interpolation, it was confirmed that using the 9th order polynomial was efficient.