• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3276-3278
• /
• 1999

LIGA 기술을 제품의 대량생산에 적용하기 위해서는 한번에 넓은 면적을 노광할 수 있는 X-ray 마스크가 요구된다. 기존에 널리 사용되고 있는 SiN 멤브레인 마스크는 내구성이 좋지 않고 면적을 크게하기 어렵다. 따라서 본 연구에서는 이러한 단점을 보완하기 위해 상용 graphite sheet를 이용하여 X-ray 마스크를 제작하였다. 제작된 graphite 마스크와 SiN 마스크를 이용하여 동일한 조건에서 X-ray 노광 실험을 하였고 마스크의 외형변화를 관찰하였다. 그 결과 SiN 마스크는 에너지 2.3GeV, 평균 전류 110mA에서 약 18시간 만에 파괴되었으나 graphite mask는 60시간 경과 후에도 육안상의 변화는 관찰되지 않았다. 또한 graphite 마스크를 이용하여 제작된 미세구조물의 치수측정결과 오차가 $1{\mu}m$ 미만인 정밀한 구조물 제작이 가능함을 확인하였다.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.4
• /
• pp.193-198
• /
• 1990

To increase the dissolution rate of furosemide, cogrinding or coprecipitating of furosemide with povidone was carried out. The ground mixture of furosemide with povidone was prepared by cogrinding in a ceramic ball mill and the coprecipitate was prepared by solvent method using methanol. The povidone ground mixture and the coprecipitate showed a faster and more enhanced dissolution rate than the physical mixture or intact furosemide. The IR, DTA and TGA studies showed the physicochemical modifications of furosemide from the ground mixture and the coprecipitate. An interaction, in the ground mixture and in the coprecipitate, such as association between the functional groups of furosemide and povidone might occur in the molecular level. The coprecipitating and cogrinding techniques with povidone provided a promising way to increase the dissolution rate of poorly soluble drugs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.34-35
• /
• 2003

광통신 분야에서 광신호의 장거리 전송에 따른 세기 감소를 보강하기 위해 쓰이는 광섬유증폭기는 현재 1.3 $\mu\textrm{m}$ 대역, 1.45 $\mu\textrm{m}$ 대역 및 1.5 $\mu\textrm{m}$ 대역에서 작동하는 희토류 이온 첨가 광섬유 광증폭기가 개발되어 쓰이고 있다. 한편 ETRI에서는 기존 광통신에 쓰이는 광 증폭기에 추가해 더 넓은 파장대를 광통신에 쓸 수 있도록 하는 새로운 파장대역의 광 증폭기 구현을 가능케하고 나아가 광통신 용량을 기존보다 휠씬 더 큰 10 Tbps급 이상으로 늘이기 위해 1.6 $\mu\textrm{m}$ 파장대인 U 밴드대 광증폭기용 광섬유인 Pr 첨가 셀레나이드 유리 조성의 신소재를 개발하였는데, 본 연구에서는 Ge-Sb-Ga-Se 계열의 Pr 첨가 셀레나이드 유리의 굴절률을 분광타원 법 (spectroscopic ellipsometry)을 사용하여 결정하였다. (중략)

• Cross-Cultural Studies
• /
• v.42
• /
• pp.343-369
• /
• 2016

This is an attempt to analyze original films of ChunHyang Jun that Shin Sang-Ok filmed in North and South Korea, focusing on the character of MongYong. These films were made during political transition periods of North and South Korea. Sung ChunHyang was made during the second republic of South Korea, which was established after the collapse of Rhee SyngMan government; and Love, Love, My Love was made in North Korea during the period of power transfer from Kim Il-Sung to Kim Jong-Un. Considering these political changes, the character of MongYong seems to represent the figure of authority North and South Korean society of the time had in mind. First, MongYong in Sung ChunHyang has a strong image of a lover who repays ChunHyang's devotion and sacrifice with romantic affection. As an authoritative figure, he has the aspect of a democratic leader or mediator. On the other hand, MongYong's image in Love, Love, My Love is a heroic authority figure of the revolutionary class. He is a subversive reformer who shows love for the people and treats them favorably, gaining public desire. This research is expected to inspire more studies on the meanings of hit movies based on classic literature under synchronic terms.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2012

Recently, the government has been working feverously to save energy and reduce greenhouse gas emission by enacting Basic Act on Low Carbon Green Growth at the national level. Improving the insulation performance of building exterior and insulator can reduce the energy in the building sector. This study is about developing light-weight foamed concrete insulation panel that can be applied to buildings to save energy and to find the optimal condition for the development of insulation materials that can save energy by enhancing its physical, kinetic and thermal characteristics. Various experimental factors and conditions were considered in the study such as foam agent types (AES=Alcohol Ethoxy Sulfate, AOS=Alpha-Olefin Sulfonate, VS=Vegetable Soap, FP=Fe-Protein), foam agent dilution concentration (1, 3, 5%), and foam percentage (30, 50, 70%). Experiment results indicated that the surface tension of aqueous solution including foam agent, was lower when AOS was used over other foam agents. FP produced relatively stable foams in 3% or more, which produced unstable foams containing high water content and low surface tension when diluted at low concentration. Depending on foam agent types, compressive strength and thermal conductivity were similar at low density range but showed some differences at high concentration range. In addition, when concentrations of foam agent and foaming ratio increased, pore size increased and open pores are formed. In all types of foam agent, thermal conductivity were excellent, satisfying KS standards. The most outstanding performance for insulation panel was obtained when FP 3% was used.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2021

POGO is a dynamic axial instability phenomenon that occurs in liquid-propelled rockets. As the natural frequencies of the fuselage and those of the propellant supply system become closer, the entire system will become unstable. To predict POGO, the propellant (oxidant and fuel) tank in the first stage is modeled as a shell element, and the remaining components, the engine and the upper part, are modeled as mass-spring, and structural analysis is performed. The transmission line model is used to predict the pressure and flow perturbation of the propellant supply system. In this paper, the closed-loop transfer function is constructed by integrating the fuselage structure and fluid modeling as described above. The pogo suppressor consists of a branch pipe and an accumulator that absorbs pressure fluctuations in a passive manner and is located in the middle of the propellant supply system. The design parameters for its design optimization to suppress the decay phenomenon are set as the diameter, length of the branch pipe, and accumulator. Multiple-objective function optimization is performed by setting the energy minimization of the closed loop transfer function in terms of to the mass of the pogo suppressor and that of the propellant as the objective function.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.157-166
• /
• 2017

In general, carbonation and chlorine ions are the most harmful causes of deterioration of concrete structures. Recently, a method has been developed to control the corrosion of rebar in concrete containing chloride by impregnating a Surface coating material with a inhibitor. In this study, accelerated carbonation and differential thermogravimetric analysis (TG-DTA) and CASS tests were carried out to evaluate the characteristics of Surface coatings containing Organic Corrosion inhibitors which are excellent in corrosion inhibition and fix degradation causes $CO_2$ and $Cl^-$. As a result of the experiment, TG-DTA analysis and accelerated carbonation showed that $CO_2$ was directly reacted with amine derivative in concrete by the incorporation of Organic Corrosion inhibitor. In other words, $CO_2$ was immobilized and carbonation inhibition effect was confirmed. In addition, in the CASS test, the specimen coated with the Surface coating material containing the Organic Corrosion inhibitor with $Cl^-$ fixing property showed no corrosion until the 28th day and had excellent performance in preventing corrosion of a rebar by the chloride ion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.200-206
• /
• 2018

The aim of this study was to evaluate the effect of Ropivacaine on pain following laparoscopic surgery. Between March 2015 and June 2017, all 97 patients with renal mass who elected to receive laparoscopic nephrectomy were reviewed, retrospectively. Normal saline (0.9%) was used as a control in 45 patients while Ropivacaine was used for local anesthesia in the instillation group (n=52). Pain score (visual analog scale) of the shoulder and upper abdominal area between the two groups was significantly different between recovery time and 24 h (p<0.05), with no significant differences between 48 and 72 h (both p>0.05). In the instillation group, pain score of shoulder and abdominal pain in the two groups according to the amount of CO2 used was not significantly different between recovery time and 24, 48, and 72 h (all p>0.05). Ropivacaine reduced shoulder and upper abdominal pain that occurred within 24 h after surgery. Effective pain control with Ropivacaine is needed in the early postoperative period when a large amount of CO2 is used in laparoscopic surgery.

• Annual Conference on Human and Language Technology
• /
• 1995.10a
• /
• pp.169-174
• /
• 1995

품사 태깅은 형태소 분석 이후 발생한 모호성을 제거하는 것으로, 통계적 방법과 규칙에 기 반한 방법이 널리 사용되고 있다. 하지만, 이들 방법론에는 각기 한계점을 지니고 있다. 통계적인 방법인 은닉 마코프 모델(Hidden Markov Model)은 유연성(flexibility)을 지니지만, 교착어(agglutinative language)인 한국어에 있어서 제한된 윈도우로 인하여, 중의성 해결의 실마리가 되는 어휘나 품사별 제대로 참조하지 못하는 경우가 있다. 반면, 규칙에 기반한 방법은 차체가 품사에 영향을 받으므로 인하여, 새로운 태그집합(tagset)이나 언어에 대하여 유연성이나 정확성을 제공해 주지 못한다. 이러한 각기 서로 다른 방법론의 한계를 극복하기 위하여, 본 논문에서는 통계와 규칙을 통합한 한국어 태깅 모델을 제안한다. 즉 통계적 학습을 통한 통계 모델이후에 2차적으로 규칙을 자동학습 하게 하여, 통계모델이 다루지 못하는 범위의 규칙을 생성하게 된다. 이처럼 2단계의 통계와 규칙의 자동 학습단계를 거치게 됨으로써, 두개 모델의 단점을 보강한 높은 정확도를 가지는 한국어 태거를 개발할 수 있게 하였다.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.178-184
• /
• 2014

CMOS technology based on PCA is very efficient at an implementation of memory or ALU. However, there has been a growing interest in quantum-dot cellular automata (QCA) because of the limitation of CMOS scaling. In this paper, we propose a design of PCA architecture based on QCA. In the proposed PCA design, we utilize D flip-flop and XOR logic gate without wire crossing technique, and design a input and rule control switches. In experiment, we perform the simulation of the proposed PCA architecture by QCADesigner. As the result, we confirm the efficiency the proposed architecture.