• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.767-774
• /
• 2006

In order to support overlay multicast with scalability and reliability, in this paper, we introduced a new multicast tree construction method and a regional multicast. The architecture we introduce efficiently transmits streaming data to the users from multicast source in an environment in which non-multicast network and multicast network. The new multicast tree construction method enables the connection with a remote relay which is an optimum condition in case there is no relay in subnet. Besides, by defining a new service type to traffic class of IPv6 header, a selective adoption or FEC and a distinctive transmission became possible. In order to verify the effect of the solution we suggested, we embodied an environment which is similar to the actual service environment by a simulator and tested it. The result of the test shows that the proposed method is more efficient than the traditional unicast approach method and the existing overlay multicast.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1337-1344
• /
• 2023

We aim to find out the effectiveness of performance evaluation to ensure safety of performance through development of high-frequency electrode probes, evaluation test protocol and evaluation simulator that is essential to ensure safety in performance evaluation and reliability evaluation of high-frequency electrode probes for underwater therapy used with high-frequency electrosurgical equipment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.45-50
• /
• 2003

Recently, robots technique has been developed remarkably. Emotion recognition is necessary to make an intimate robot. This paper shows the simulator and simulation result which recognize or classify emotions by learning pitch pattern. Also, because the pitch is not sufficient for recognizing emotion, we added acoustic elements. For that reason, we analyze the relation between emotion and acoustic elements. The simulator is composed of the DRNN(Dynamic Recurrent Neural Network), Feature extraction. DRNN is a learning algorithm for pitch pattern.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.80-87
• /
• 2005

T-50 supersonic jet trainer aircraft using digital flight-by-wire flight control system receives aircraft flight conditions such as altitude, VCAS(Calibrated Airspeed) and Angle of Attack from IMFP(Integrated Multi-Function Probe). IMFP sensors information have triplex structure using three IMFP sensors. Air-data selection logic is mid-value selection in three information from three IMFP sensors in order to have more reliability. From supersonic flight test at high altitude, air-data information is dropped simultaneously because of supersonic shock wave effect. This error information may affect to aircraft stability and safety in supersonic area at low altitude. This paper propose that sensitivity analysis and HQS(Handling Quality Simulator) pilot simulation in order to analyze flight stability and controllability in supersonic area at low altitude when these information is applied to flight control law.

• The KIPS Transactions:PartD
• /
• v.17D no.2
• /
• pp.157-166
• /
• 2010

More recently, RFID (Radio Frequency Identification) systems have begun to find greater use in various industrial fields. The use of RFID system in these application domains has been promoted by efforts to develop the RFID tags which are low in cost, small in size, and high in performance. The RFID applications enable the real-time capture and update of RFID tag information, while simultaneously allowing business process change through real-time alerting and alarms. These be developed to monitor person or objects with RFID tags in a place and to provide visibility and traceability of the seamless flows of RFID tags. In this time, the RFID readers should be placed in diverse locations, the RFID flows between these readers can be tested based on various scenarios. However, due to the high cost of RFID readers, it may be difficult to prepare the similar environment equipped with RFID read/write devices. In this paper, we propose a simulator to allow RFID application testing without installing physical devices. It can model the RFID deployment environment, place various RFID readers and sensors on this model, and move the RFID tags through the business processes. This simulator can improve the software development productivity by accurately testing RFID middleware and applications. In addition, when data security cannot be ensured by any fault, it can decide where the problem is occurred between RFID hardware and middleware.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.72-79
• /
• 2016

In this paper, we propose a Service-adaptive Tactical Data Transmission Protocol (STTS) based on Satellite Communications with narrow bandwidth. STTS is designed to provide additional field for scalability and scheduler for reliability of transport stream protocol based on digital broadcasting standard, DVB-S and DVB-S2. It is also verified the effects of lost data packets with narrow bandwidth through the simulator by traffic model and re-transmission of critical data, and checked the design considerations based on STTS system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.69-75
• /
• 2011

As part of its space development program, Korea has a plan for the launch of a lunar orbiter and a lunar lander. To enable the transmission of lunar information based on multimedia, it is necessary to construct a communication system that is capable of transmitting large-volume telemetry data. The CCSDS standard recommends the deferred NAK mode as ARQ scheme for reliable long-distance deep-space communication systems. In this paper, we implement a space communication system simulator in the deferred NAK mode using models of the lunar orbiter, the earth station, and the space environment. The simulator employs modulation techniques and turbo coding schemes for transmitting large-volume telemetry data. We analyze the transmission performance of telemetry data through the simulation.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.1-7
• /
• 2015

These anti-jamming GPS systems are verified using large anechoic chamber or field-test until now. When using a large anechoic chamber, Independent verification from external enviroments like noise is an advantage but high cost and availability of chamber are disadvantages. And in case of field test, verification under real propagation enviroment is an advantage but security problem of military equipments and problem of making same test condition are disadvantages. This paper presents an newly developed anti-jamming GPS test system. This test system mainly consists of small anechoic chamber, jamming divider, jamming signal generator and satellite simulator. The small anechoic chamber is installed many jamming antennas to transmit multi jamming signals and the jamming divider is newly developed to control multi jamming signals. According to self performance test and combined test with Anti-jamming GPS receiver, we verified our system's reliability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.9
• /
• pp.843-849
• /
• 2007

Recent progress on software engineering especially in object-oriented design concepts has enabled the development of the simulation models of satellite components in view of reliability and reusability. This paper proposes an useful satellite simulator framework using simulation service and generalized model design. The proposed method is verified by a prototyping in .NET/C# environment.