• Journal of Applied Reliability
• /
• v.14 no.3
• /
• pp.152-161
• /
• 2014

According to Korea Federation of Small and Medium Enterprises (SMEs)' report, SMEs account for 99% and number of SMEs workers account for 87% in Korea. Thus, SMEs has an important role in the future Korean industry. This paper considers the improvement methods of SMEs' quality competitiveness. For this study, we developed the quality measurement model for identifying SMEs' quality level and investigated many companies by survey and interviews. We also performed the benchmarking study and the gap analysis between Korea and other countries. This paper suggests some policies for increasing the quality of SMEs.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.31-36
• /
• 2002

The 2nd level solder joint reliability of 153 FC-BGA for high-speed SRAM (Static Random Access Memory) with the large chip on laminate substrate comparing to PBGA(Plastic Ball Grid Array) was studied in this paper. This work has been done to understand an influence as the mounting with single side or double sides, structure of package, properties of underfill, properties and thickness of substrate and size of solder ball on the thermal cycling test. It was confirmed that thickness of BT(bismaleimide tiazine) substrate increased from 0.95 mm to 1.20 mm and solder joint fatigue life improved about 30% in the underfill with the low young's modulus. And resistance against the solder ball crack became twice with an increase of the solder ball size from 0.76 mm to 0.89 mm in solder joints.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.466-471
• /
• 2007

Electrical fires form over 30 percent of fires, but the study on the reliability of electrical fire statistics is not performed. Electrical roe occupancy was very high due to investigating and classifying fires, which is not directly continuous with electrical cause, as electrical fire because insufficiency of cause classification method or system, and the problems of the reliability of electrical fire statistics were presented. So, the reliability of electrical fire statistics must be guaranteed by improvement of the existing cause classification method of electrical fire. This paper analyzed the problems of electrical rue statistics by the existing cause classification method of electrical fire and presented the new method to classify causes of electrical fire.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.85-90
• /
• 2011

With regard to reliability of solder joint, the significant failures include open defects that occurs from alignment problem, Head in Pillow by PCB's warpage, the crack of solder by CTE mismatch, and the crack of IMC layer by mechanical impact. Especially as PCB down-sizing and surface finish is under progress, brittle failure of IMC layer between solder bump and PCB pad becomes a big issue. Therefore, it requires enhancing the level of difficulty in the existing assessment method and improving the measurement through the study on the mechanism of IMC formation, growth and brittle failure. Under this circumstance, this study is intended to suggest the direction of research for improving the reliability on the crack such as improvement of IMC brittle fracture.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.249-252
• /
• 1998

ETSI(European Telecommunications Standards Institute) 300 34701, ITU-T(International Telecommunication Union) G.965 recommended PSTN, CONTROL, LINK CONTROL, BCC, PROTECTION protocols on V-Interfaces. But it is possible to occur misalignment between LE(Local Exchange) and AN(Access Network), especially in link identification procedure because there isn't any comment about V5.2 system management. In this paper we propose S/W guard timer to improve reliability in V5.2 link identification procedure in scope of Recommendation.

• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.162-170
• /
• 2016

Purpose: The purpose of this study was to analyze the failure modes of an auto transfer switch (ATS), determine the most common failure mechanisms, and iterate the design to improve reliability. Methods: We carried out failure mode and effect analysis (FMEA) to determine the failure modes and mechanisms. We identified the parts or modules that required improvement via two-stage quality function deployment based on FMEA, and improvements to reliability were monitored using the Gomperz growth model. Results: The main failure modes of the ATS were damage to, and deformation of, the stator / movable element due to repetitive movements. Five iterations of design modification were carried out, and the mean time to failure (MTTF) increased to 14,539 cycles, corresponding to 85% of the target MTTF. The Gompertz growth model indicates that the 10th iteration of design modification is expected to achieve the target MTTF. Conclusion: We improved the reliability of mechanical parts via failure mode analysis, and characterized the iterative improvements in the MTTF using the Gompertz growth model.

• Journal of Power System Engineering
• /
• v.8 no.2
• /
• pp.5-11
• /
• 2004

The failure frequency of the Emergency Diesel Generator(EDG) at Nuclear Power Plants(NPPs) is not so much lower than that of the Marine engines, whereas the running hours of the diesel engine at NPPs is much less than those of the engines for commercial service. The primary factor results from the severe surveillance test requirements such as fast start, large number of starting test, fast load-run, high load running, etc. The other factor comes from the excessive maintenance based on the engine maker's instruction manual that did not incorporate the peculiar characteristics of the diesel engines at NPPs. In this paper, the present preventive maintenance program on the basis of the Pielstick diesel engines was reviewed for the purpose of securing the reliability of the emergency diesel generator at NPPs and the ways for its improvement were presented by referring to the overseas cases for their applications.

• Journal of Applied Reliability
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2014

In the mechanical design process various types of errors are bound to occur. In order to prevent such mechanical malfunctions and decrease number of instances of errors, various technique are utilized. The purpose of this research is to demonstrate the effectiveness of the combined service Blueprint and FMEA (Failure Mode and Effect Analysis) by applying such method to machine process. The results are as follows: First, modification can be obtained by discovering the failure mode hidden within the inner side of the blueprint. Second, issues within the company are found when conducting the machine design process that is not visible from the outside. Therefore, potential errors can be effectively resolved by preventing failure mode in advance and eventually high quality of the product could be obtained as well as its reliability.

• Composites Research
• /
• v.23 no.2
• /
• pp.40-47
• /
• 2010

In this paper, the hybrid response surface method(HRSM) is proposed and examined. Hybrid response surface method calculate a approximate model repeatedly based on MPP coordinates. To verify the performance, probability of failure, MPP(Most Probable failure Point) and reliability index are calculated for nonlinear function and composite laminated plate by using reliability analysis method and compared with results by using typical response surface method(RSM). Probability of failure is calculated under the assumption of the nonlinear limit state equation and given failure criterion. The results of proposed method shows performance improvement in estimating the probability of failure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2D
• /
• pp.319-327
• /
• 2009

In order to estimate accurate position by GPS observations, it is prerequisite to define both of the correct function model and the realistic stochastic model. In the case that un-modeled outliers exist in observations, estimates become biased, and their standard deviations are unable to be used as a measure which represents their accuracy. Hence, such outliers should be appropriately removed from the observations before estimating final solutions, so that the accuracy can be maximized with the improvement of the reliability. For this purpose, this research deals with quality control and quality measure computation algorithms for GPS stand-alone positioning. After theoretical studies, all the algorithms have been implemented and tested with real observations. Results of the tests indicate that the reliability of the estimated position is improved by increasing redundancy as well as using good satellite geometry and more realistic stochastic model. Moreover, the adaptation of the quality control procedure enable to improve positioning reliability and accuracy by appropriately excluding outlier in observations.