• The Journal of the Korea Contents Association
• /
• v.15 no.3
• /
• pp.114-122
• /
• 2015

This study aims to analyze the satisfaction of seniors living in Cheonan City downtown as to their residential environment. Also, this study intends to identify which factors should be improved first to make downtown a favorable residential area. To that end, 'social indicators of Chungnam' was used. The collected data was analyzed through a statistical analysis method using ANOVA (analysis of variance) and a cluster analysis. It led to the following findings. First, 6.9% of the elderly residents expressed their wish to move from their downtown residence. Thus, the majority of the residents do not want to move. Second, the satisfaction of the elderly residents in their downtown residence scored 6.09. The score is higher than those of other regions. Thus, it is highly possible to develop downtown into a senior-friendly area. Third, as for satisfaction in downtown residence, it was higher among the following groups: men; those with high school or higher level of education; those earning at least a million won a month; family of one generation. Fourth, satisfaction in the following factors was relatively low: culture and education; interaction with neighbors and trust in them; car accidents. Thus, those factors should be improved for downtown residents. Above all, community-faced facilities should be expanded to increase exchanges with neighbors and trust in them. To attract women dissatisfied with downtown residence. it is imperative to increase daily safety by reducing car accidents and crime.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.31-38
• /
• 2013

After debris flow caused damage during recent years, many scholars and engineers have thrown their effort into analyzing risk from debris flow in Korea. But it is hard to predict damage by debris flow taken place in wide area. Recently, SINMAP program is widely well used to estimate the amount of debris flow and its' range. In order to make frequent use of it, the most important thing is selection of accurate input parameters. In-situ experiments, which are avaliable in the mountain, is to be suggested to get dependable input parameters for SINMAP. Those are permeability, cohesion, density, friction angle and thickness in SINMAP. To get those, test pit, block sampling, in-situ density test, auger boring, permeability test on ground surface, borehole shear test and dynamic cone test and so forth were selected. In addition, the reliability of the results will be increased through comparing with those by laboratory tests. Hence, the experiments are hard to enter the sites without temporary road and, if possible, licensing and many times are needed, too. Small size experiments are indeed necessary to get accurate parameters.

• Journal of Information Management
• /
• v.40 no.1
• /
• pp.69-86
• /
• 2009

The biggest paradigm of the latest telecommunications is ubiquitous computing. It is a technology basis to realize ubiquitous society that would affect social, economical and cultural industries with positive influence. However, there is a simultaneous concern that the approach to ubiquitous society may violate one's privacy. Therefore, the existence of legal and technological regulation would be the biggest obstacle in further RFID technology and industry dissemination. Also, in business side, they must invest with enormous expense and technology if technological method is only approached for the solution. As in the research, 8 RFID applications, application process and inspection items and 85 appraisal list of "An impact assessment for the privacy protection in RFID applications" developed by P. K. Han(2006), will be used as an indicator to measure RFID privacy impact assessment. In addition, it is to develop RFID privacy impact assessment index by applying objective data with survey of applied specialists. This would provide a data with feasibility and reliability to RFID related companies and able to utilize policy making on RFID private data. In addition, it is expected to contribute as an efficiency tool for individual data to build basis of ubiquitous society.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.156-169
• /
• 2015

This study was to evaluate the RCP climate change impact on hydrological components in the Imha-Dam watershed using SWAT(Soil and Water Assessment Tool) Model. The model was calibrated for six year(2002~2007) and validated for six year(2008~2013) using daily observed streamflow data at three watershed stations. The overall simulation results for the total released volume at this point appear reasonable by showing that coefficient of determination($R^2$) were 0.70~0.85 and Nash-Sutcliffe model efficiency(NSE) were 0.67-0.82 for streamflow, respectively. For future hydrologic evaluation, the HadGEM3-RA climate data by scenarios of Representative Concentration Pathway(RCP) 4.5 and 8.5 of the Korea Meteorological Administration were adopted. The biased future data were corrected using 34 years(1980~2013, baseline period) of weather data. Precipitation and temperature showed increase of 10.8% and 4.9%, respectively based on the baseline data. The impacts of future climate change on the evapotranspiration, soil moisture, surface runoff, lateral flow, return flow and streamflow showed changes of +11.2%, +1.9%, +10.0%, +12.1%, +18.2%, and +11.2%, respectively.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.566-576
• /
• 2018

The C-ITS requires the lane level positioning of the vehicle in the land transportation environment, and it is most effective to utilize the GNSS. In the precision positioning system based on satellite navigation, the evaluation of dynamic environment of lane level positioning performance should be accompanied and the evaluation system configuration should be preceded. In this paper, we selected performance indicators, assessment equipment, and reliability of reference equipment for evaluation of precision positioning user systems based on the GNSS. The performance evaluation system described above is applied to a real system, and the performance evaluation tool developed for the evaluation system is described. The numerical performance evaluation was carried out based on the data collected by carrying out the actual testbed driving. The performance evaluation by the actual driving trajectory and driving image comparison was performed to derive and analyse the evaluation results of the vehicle lane level positioning user system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.2
• /
• pp.171-182
• /
• 2022

InSAR (Interferometry SAR) technique is a technique that uses complex data to obtain phase difference information from two or more SAR image data, and enables high-resolution image extraction, surface change detection, elevation measurement, and glacial change observation. In many countries, research on the InSAR technique is being conducted in various fields of study such as volcanic activity detection, glacier observation in Antarctica, and ground subsidence analysis. In this study, a case of large ground settlement due to groundwater level drawdown during tunnelling was introduced, and ground settlement analyses using InSAR technique and numerical analysis method were compared. The maximum settlement and influence radius estimated by the InSAR technique and numerical method were found to be quite similar, which confirms the reliability of the InSAR technique. Through this case study, it was found that the InSAR technique reliable to use for estimating ground settlement and can be used as a key technology to identify the long-term ground settlement history in the absence of measurement data.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.211-220
• /
• 2021

Land Surface Temperature (LST) is one of the useful parameters to diagnose the growth and development of crop and to detect crop stress. Unmanned Aerial Vehicle (UAV)-based LST (LSTUAV) can be estimated in the regional spatial scale due to miniaturization of thermal infrared camera and development of UAV. Given that meteorological variable, type of instrument, and surface condition can affect the LSTUAV, the evaluation for accuracy of LSTUAV is required. The purpose of this study is to evaluate the accuracy of LSTUAV using LST measured at ground (LSTGround) under various meteorological conditions and growth phases of garlic crop. To evaluate the accuracy of LSTUAV, Relative humidity (RH), absolute humidity (AH), gust, and vegetation index were considered. Root mean square error (RMSE) after minimizing the bias between LSTUAV and LSTGround was 2.565℃ under above 60% of RH, and it was higher than that of 1.82℃ under the below 60% of RH. Therefore, LSTUAV measurement should be conducted under the below 60% of RH. The error depending on the gust and surface conditions was not statistically significant (p-value < 0.05). LSTUAV had reliable accuracy under the wind speed conditions that allow flight and reflected the crop condition. These results help to comprehend the accuracy of LSTUAV and to utilize it in the agriculture field.

• Journal of Korea Water Resources Association
• /
• v.53 no.spc1
• /
• pp.813-826
• /
• 2020

This study analyzes the effects of the Smart Water City (SWC) project that was introduced from 2014 to 2016 in Paju City, Gyeonggi Province, Korea, focusing on the achievement of the business goals. The SWC is referred to as a city that embraces a healthy water supply system based on Smart Water Management (SWM) that promotes the efficiency of water management by combining Information and Communication Technologies (ICTs) with water and sewerage facilities. In order to evaluate the effectiveness of the SWC project, this study deploys evaluation criteria corresponding to the project objectives, and analyzes the outputs before and after the project. The results show that the SWC has contributed to enhancing water supply services and the reliability and drinking rate of tap water. Specific improvement areas include the rise of average water flow rate and water leakage reduction, the diffusion of water quality monitoring system, and the reduction of floating particle concentration and turbidity in drainage pipes was achieved. These were possible because of specific implementation plans for clear goal setting and achievement and active services for citizens. The data related to water quantity and quality showed improved performance compared to before the introduction of SWMS, which is a positive effect. However, a quantitative analysis of the outputs has limitations in identifying other external factors that have led to the changes. In the future, guidelines for spreading SWC and more comprehensive and specific evaluation indicators for SWC should be prepared, and SWMS should be developed in consideration of the needs of users.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.249-258
• /
• 2016

In this research, we analyzed the research and development process of small and medium enterprises, and diagnosed the problem of the research and development process of domestic small and medium enterprises, and evaluated the influence of innovative ability on the speed of research and development and corporate performance. In evaluating these effects, it is possible to grasp the direction of power generation according to the type of analysis, taking into account the meltdown factor of factors related to innovative capabilities. The main purpose of this research is to confirm the influence on the speed of research and development according to the innovative capacity and business environment and to verify the reliability and validity of the research by Klumbach alpha Was used. In this research, we analyzed how the speed of R & D affects R & D activities, it is a research aimed at the necessity of a resource-based approach to the internal capacity of a company, Have a valuable value. Based on the influence on the company, each factor is a research that analyzed the influence on R & D and financial indicators through maintaining company's development level, Research that has practical value that can base on the development of R & D capacity on corporate strategy formulation.