• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.310-313
• /
• 2016

In this paper, we propose the tester apparatus for 48 channel GM Tube sensor. The proposed apparatus can test up to 48 channel GM tube simultaneously to detect the defect and analyze the sensor characteristic. 300-1000V variable high voltage generation circuit is utilized for the apparatus suitable for the sensor characteristic. Thus, the proposed system is useful for various GM Tube sensor characteristic analysis. Multiple sensor testing environment is established for the early detection of the defect and the analysis to reduce the costs for manufacturing and rework. Developed 48 channel GM Tube sensor test is evaluated with certified testing equipment and shows excellent performance with respect to the uncertainty of the sensor test results.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2017

It is necessary to check the fault of phased array antenna, when the active phased array radar installed in the site is suspected performance degradation due to external impact or long-term operation. However, the near-field test should be performed in anechoic chamber in order to measure the phased array antenna, so that much time and cost must be applied for radar disassembly and transportation, and the operational availability of the radar system is deteriorates. Therefore, we propose a near-field scanner with mobility to check the fault of the phased array antenna at the site, and the effectiveness of the proposed scanner was verified with ${\pm}0.5dB$ magnitude and ${\pm}1.5^{\circ}$ phase in comparison with measured data in anechoic chamber.

• The Korean Journal of Mycology
• /
• v.34 no.1
• /
• pp.29-33
• /
• 2006

To develop environmentally friendly bio-materials for animal feed, the potential of using mushroom was studied. Adding Flammulina velutipes cultivation media wastes (FCMW) has shown beneficial effects on broiler meat quality and production cost because of the $10{\sim}20%$ saving in feeds for broiler chicken. However, differences proximate composition between FCMW and commercial broiler chicken feed were observed. FCMW had higher contents of crude fat (6.2%) and crude fiber (13.7%) than the commercial broiler feed which had crude fat and crude fiber of 4.0%, and 6.0%, respectively. But FCMW crude protein contents were lower (12.2%) than those in commercial broiler (19.0%). Adding $5{\sim}10%$ of FCMW to broiler chicken feed increased amino acid concentration upto $33{\sim}38%$ in the meat, but adding more than 20% decreased amino acid concentration.

• Journal of the Korea Society for Simulation
• /
• v.20 no.3
• /
• pp.59-67
• /
• 2011

This paper proposes a model to analyze the fault factors of air-to-ground weapon delivery utilizing software fault localization methods. In the previous study, to figure out the factors to affect the accuracy of air-to-ground weapon delivery, the FBEL (Factor-based Error Localization) method had been proposed and the fault factors were analyzed based on the method. But in the study, the correlation between weapon delivery accuracy and the fault factors could not be revealed because the firing accuracy among several factors was fixed. In this paper we propose a more precise fault analysis model driven through a study of the correlation among the fault factors of weapon delivery, and a method to estimate the possibility of faults with the limited number of test cases utilizing the model. The effectiveness of proposed method is verified through the simulation utilizing real delivery data. and weapons delivery testing in the evaluation of which element affecting the accuracy of analysis that was available to be used successfully.

• Korean Journal of Plant Resources
• /
• v.16 no.3
• /
• pp.218-222
• /
• 2003

This study was carried out to find optimum condition through sterilization methods for cultivation of Neutaribeosut (Oyster mushroom). 1. Yield of additive culture of pine sawdust, cotton and rice hulls at bag­cultivation of Neutaribeosut. was similiar to additive culture of pine sawdust, cotton and pulpe as conventional methods. 2. Yield of Neutaribeosut at low temp. sterilization method as 50 to 6$0^{\circ}C$ and 7days treatment was higher about 18 to 19％ than that of high temp. as 121$^{\circ}C$ and 90 minutes treatment. 3. In case of farmer­cost, low than high temperature sterilization method appeared lowly about 12％. So this method will be of advantage to farmers in both yield and farmer­cost.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.229-236
• /
• 2005

To cope with increasing requirements of cost reduction, labor saving, and rapid construction, the purpose of this study is to investigate the structural behavior of PSC monolithic and spliced girders. Three tests were conducted on reduced-scale girder specimens having same type. This paper presents the result of experimental studies on the load-deflection behavior in which different joint and amount of tendon as major variables were investigated. The first one used a monolithic girder was arranged with three tendons. The second one used a spliced girder was joined with three tendons after producing five segments. And the third girder was produced in same conditions with the second girder and arranged with additional tendons. The experimental results show the difference of behavior between monolithic and spliced girders.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.283-291
• /
• 2006

Recently, a logistics between south and north Korea is rising rapidly by increasing of economical exchange between two Korea and growth of Gaeseoung Industrial Complex. Considering this trend of economic cooperation between two Korea, in addition to a land transportation route it is necessary to secure various logistics and transportation route. A barge transport system which has merits such as a little initial investment and convenience of harbor loading/unloading has been also used to transport freight widely in the EU and USA. In this paper, firstly, a social and economical feasibility study is performed about a shipping route which is using barge transportation system between Incheon and Gaesung. And also we propose several candidate shipping route and investigate a technical feasibility on a realistic possibility of shipping service by some investigation activities. Finally, the optimized shipping route and barge transportation system are proposed in this paper.

• Journal of Engineering Education Research
• /
• v.15 no.2
• /
• pp.3-9
• /
• 2012

Normally, people think the results of engineering design project can be seen and be touched, however, it's not easy to develop such design subjects at IT related program. This matter turns into an initiative of Seoul Accord corresponding to the Washington Accord. In this paper, an engineering design project is developed from the lecture course that can hardly develop a touchable project due to the lack of expanse or the own characteristics of the course in the IT related program that follows the Washington Accord. An open-ended design project with the pre-defined design components and realistic constraints is developed for the Computer Network Design course. Each team consisted of 2 or 3 students performs the project for more than 5 weeks utilizing a software simulator, the Packet Tracer. In order to analyze the effectiveness, we have used various evaluation tools such as final presentation, peer evaluation, survey results, and mid/final exams. We concluded that the hard and soft skills of students have been improved considerably through the project.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.393-400
• /
• 2017

A virtual simulation test program to carry out the handling qualities of unmanned Rotorcraft has developed by using the MATLAB GUIDE(Graphic User Interface Development Environment). The handling quality evaluation program based on ADS-33E contributes to design the flight control system and to evaluate handling qualities. In addition, Linear Quadratic Tracker with Integrator(LQTI) attitude controller based on Linear Quadratic Regulator(LQR) for to rotorcraft BO-105C and the effects of the handling qualities is analyzed change to weight matrices of the Q and R.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1948-1954
• /
• 2014

Advances in IT technology and modernization of AtoN(Aids to Navigation) facility has increased the unmanned operation of AtoN. However, in AtoN facilities, accessibility is low and it is not able to perform maintenance on the bad weather at the time. In connection with this, in this paper, by applying the protocol of the enhanced dual LED marine lantern, we implemented the short-range monitoring system for a mobile terminal. System implemented in this paper can be carried out confirm the operation status, inspection or control of the dual LED marine lantern at a short distance. Also, it is possible to reduce maintenance costs and prevent accidents during inspection of AtoN. At the same time, it enables the operation test easily without disassembling the product, effective AtoN operation is possible. We tested the system that has been implemented using prototype of the LED marine lantern and confirmed state informations and controlled the behavior of the system in real time.