• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1986_1987
• /
• 2009

홈헬스케어용으로 사용되는 온열기기의 오동작이나 안전사고에 대한 예방으로 품질향상과 안전성확보가 필요하며 이를 위한 시판전의 시험검사나 시판후의 수거검사시에 성능시험과 안전장치검사가 필요하다. 본 논문에서는 개인용온열기의 안전성 확보와 성능평가를 위한 표준시험방법을 연구하였다.

• Journal of Korean Society for Quality Management
• /
• v.4 no.1
• /
• pp.31-39
• /
• 1976

관능검사(官能檢査) 일반법(一般法)의 표준화(標準化)를 위(爲)하여 우리나라 실정(實情)에 맞는 관능검사(官能檢査) 방법(方法)을 시험연구검토(試驗硏究檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 감도시험(感度試驗) 및 차이식별(差異識別) 능력시험(能力試驗)을 통(通)하여 관능(官能)파넬을 선발(選拔)하였으며, 선발(選拔)된 파넬을 대상으로 우유(牛乳) 제품(製品)의 관능특성(官能特性)에 대한 차이식별검사(差異識別檢査), 순위시험(順位試驗), 채점시험(採點試驗), 기호시험(嗜好試驗) 등을 실시하여 우리나라 실정(實情)에 적합한 관능검사(官能檢査) 방법(方法)을 요발전(要發展)시켰다. 2. 9 단계(段階) 기호척도(嗜好尺度) 및 제품(製品)에 대한 기호성(嗜好性)의 우리말 표현(表現) 용어(用語)을 조사(調査)하였다. 3. 우리나라 산업계(産業界) 실정(實情)에 적합한 관능검사(官能檢査) 일반법(一般法)에 관(關)한 표준(標準) 규격안(規格案)을 작성(作成)하였다.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.188-196
• /
• 2007

A composite case was designed to satisfy the required condition of KSLV-I kick motor system. we performed the structure and combustion tests to insure the reliability of the case before the production of the flight model. The hydraulic, vacuum and non destruction testes as the structure test were carried out to confirm the strength of the components of the case and the characteristics of the thermal and structure were investigated through the ground combustion test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.294-303
• /
• 2005

This paper describes the analysis results of a series f Round-Robin test that was performed to intercompare inspection and diagnosis techniques for characterization of pressure tube f a pressurized heavy water reactor under the Coordinated Research Project(CRP) of IAEA's nuclear Power Programme. For this test, six nations, Korea, Canada, India, Argentina, Rumania, and China that currently have pressurized heavy water reactors under operation involved, and the "KOR-1" pressure tube sample prepared by Korea was used. Two kinds of NDE technique, ultrasonic and eddy current test, were applied for these tests. The "KOR-1" pressure tube sample contains total 12 artificial flaws such as crack-like EDM notches, wear that is similar to the real flaws and can be produced on the pressure tubes during plant operation. Test results showed that seven laboratories from six nations detected all twelve flaws in "KOR-1" specimen by using ultrasonic and eddy current test methods, and ultrasonic test method was more accurate than eddy current test method in flaw detectin and sizing. ID flaws in pressure tube sample were more easily detected and accurately sized than OD flaws.

• 대학교육
• /
• s.76
• /
• pp.64-74
• /
• 1995

최근 새로운 교육개혁안이 확정 발표되면서부터 새삼 대입전형의 준거로 대학수학능력시험의 비중이 증대되고 있다. 우리의 수능시험과 유사한 SAT나 ACT는 미국의 각 대학에서 신입생 선발을 할 때, 중요한 전형자료의 하나로 사용하는 검사이다. 이 두 검사는 대등한 정도로 널리 이용되고 있으나 그 교육철학적인 배경은 상이하며, 또 후자는 우리에게 별로 알려져 있지 못한 실정이다. 따라서 여기에서는 ACT의 평가내용, 검사개발과정, 결과활용 등을 소개하고 우리의 대학수학능력시험과 관련하여 그 시사점을 논의하였다.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.111-117
• /
• 2023

Sampling inspection methods for quality control have been proposed a lot in the industry. However, the sampling inspection method for reliability, which is a quality over time, has been relatively less presented, and there are not many literatures that are clearly summarized. Therefore, this paper focuses on the reliability conformity test to verify that the reliability evaluation scale value of the target is satisfied during the reliability test. To this end, first, we look at the conditions that both consumers and producers can satisfy in terms of the OC curve and find out what sampling methods satisfy the desired level of producer risk and consumer risk. Next, two methods of the reliability sampling methods such as attribute and variable reliability sampling methods are examined. Specifically, the attribute reliability sampling method is a form of sampling plan where n samples are tested for a certain period of T hours and the lot is accepted if the number of failures is less than or equal to a certain number c. On the other hand, the variable reliability sampling method is a form of sampling plan where the lot is accepted if the reliability evaluation scale such as MTBF satisfies a certain standard. Both sampling plans may also use inspection tables.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.650_651
• /
• 2009

현재 한국전기연구원에서는 년간 약 1,000여대 이상의 차단기류에 대하여 사용전 검사 시험을 실시하고 있다. 차단기류의 사용전 검사 시험 항목은 개폐 특성에 대한 검증이 주를 이룬다. 현재 사용하고 있는 차단기 개폐특성 시험 설비는 약 20여년을 사용하여 보수가 필요한 시점에 도달하였다. 본 논문에서는 차단기류의 개폐특성 시험에 사용하던 차단기 특성 시험 시스템의 단점을 보완하여 시험의 신뢰성 및 사용자 편의성을 향상시킨 시험 시스템을 개발하고자 한다.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.230-236
• /
• 2007

The quality control of composite structure includes inspection, testing and monitoring in all processes from receiving inspection to part fabrication. The purpose of these activities is to ensure that the design objectives are consistently achieved. The quality factors include material, receiving inspection, storage and shelf-life control, environmental control, testing, inspection and record control. This paper presents the process verification method using destructive test and quality control method in composite structure of aircraft. And it is believed that the destructive test will be basis to obtain a reliability of non-destructive test in complex composite structure and to ensure the design requirements in composite part.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.135-143
• /
• 2013

Friction Stir Welding (FSW) was developed, it is successfully commercialized in the field of transportation vehicles. In this study, we analyzed the defects of A2024-T4 alloy using non-destructive test of radiograph, ultrasonic, electrical conductivity and destructive test of microstructure observation, tensile strength. As the results of experiment, mapping of defects was obtained. Fine defects which were not detected in radiograph test were detected in ultrasonic test, and it enabled efficient detection of defects by difference of sound pressure and color. The values of electrical conductivity was decreased as amount of defects was increasing. Joint efficient of defect-free weldment that found by non-destructive and destructive test was 91%. Therefore it was considered that non-destructive test of friction stir welded A2024-T4 Alloy was an efficient method.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1984_1985
• /
• 2009

개인용의료기기는 오동작이나 부작용에 대한 예방으로 품질향상과 안전성확보가 필요하며 이를 위한 시판전의 시험검사나 시판후의 수거검사시에 안전성평가를 위한 표준시험방법 개발이 필요하다. 본 논문에서는 개인용의료기기의 전기 및 기계적 안전성 평가를 위한 필수안전시험에 대한 표준시험방법을 연구하였다.