• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.528-537
• /
• 2008

60 nm and 20 nm thick hydrogenated amorphous silicon(a-Si:H) layers were deposited on 200 nm $SiO_2$/single-Si substrates by inductively coupled plasma chemical vapor deposition(ICP-CVD). Subsequently, 30 nm-Ni layers were deposited by an e-beam evaporator. Finally, 30 nm-Ni/(60 nm and 20 nm) a-Si:H/200 nm-$SiO_2$/single-Si structures were prepared. The prepared samples were annealed by rapid thermal annealing(RTA) from $200^{\circ}C$ to $500^{\circ}C$ in $50^{\circ}C$ increments for 40 sec. A four-point tester, high resolution X-ray diffraction(HRXRD), field emission scanning electron microscopy(FE-SEM), transmission electron microscopy(TEM), and scanning probe microscopy(SPM) were used to examine the sheet resistance, phase transformation, in-plane microstructure, cross-sectional microstructure, and surface roughness, respectively. The nickel silicide from the 60 nm a-Si:H substrate showed low sheet resistance from $400^{\circ}C$ which is compatible for low temperature processing. The nickel silicide from 20 nm a-Si:H substrate showed low resistance from $300^{\circ}C$. Through HRXRD analysis, the phase transformation occurred with silicidation temperature without a-Si:H layer thickness dependence. With the result of FE-SEM and TEM, the nickel silicides from 60 nm a-Si:H substrate showed the microstructure of 60 nm-thick silicide layers with the residual silicon regime, while the ones from 20 nm a-Si:H formed 20 nm-thick uniform silicide layers. In case of SPM, the RMS value of nickel silicide layers increased as the silicidation temperature increased. Especially, the nickel silicide from 20 nm a-Si:H substrate showed the lowest RMS value of 0.75 at $300^{\circ}C$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.3-12
• /
• 1992

Forage grasses and legumes ar$\varepsilon$ the mam component of livestock diets in Canada. There are over 30 million ha of grassland in Canada and there is a large, undeveloped land base in fringe areas suitable for forage production. The short growing s season limits the grassland farming to the southern p parts of Canada. The win!er season is long and in most parts of Canada cold temperatures, fr$\varepsilon$ezmg, and thawing, and diseases exert sever$\varepsilon$ stress on overwintering forage plants. The development of persistent cultivars is essential for sustained production particularly in the fringe areas with short growmg s$\varepsilon$ason. The seasonality of dry matter production is a result of high growth rates in early summ$\varepsilon$r and low dry matter accumulation in late summer and fall. Innovative management practIces a and cultivars with improved regrowth capacity are n necessary to overcome such skewed production pattern and to extend effiectlVe grazmg season l Improved pasture production is an important part of reducing costs in livestock operations and remaining competitive. It is suggested that applying available technology would increase pasture productivity and reduce d$\varepsilon$pendence on stored feeds thus improving profitability of small producers in particeular. Reducing nutrient losses during harv$\varepsilon$stmg, s storage, and feeding is essential for improved production efficiency during confinement. The devclopment of low cost and labor saving methods of ensiling is critical for improved efficiency and profitability of forage based enterprises Livestock industries must respond to consumer preferences for low fat and cholesterol foods. Research and development of entire production systems is emphasized for dev$\varepsilon$loping viabl$\varepsilon$ enterprises. It is increasingly difficult to secure resources for r$\varepsilon$search, education, and extension, and alliane$\varepsilon$s and cooperation must expand among organizations with interests in forage based livestock systems.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.685-698
• /
• 1995

This study was conducted to the effect of temporary cement on the adhesiveness of dentin bonding agent to dentin surface. One hundred freshly extracted bovine mandibular incisors were grinded to expose flat labial dentin surface. The dentin surfaces were temporarized with either eugenol-containing temporary cement(TemBond and Zinc Oxide Eugenol cement) or non-eugenol temporary cement(Nogenol and TempBond NE) for 7days, and then the temporarization was removed with surgical currette and the exposed dentin surfaces were water-rinsed. Bonding specimens were made by use of All-Bond 2 and Super-Bond C&B dentin bonding agent, and stored in $37^{\circ}C$ distilled water for 24hours. The tensile bond strenth and the cohesive failure rate were measured, and then the pretreated dentin surfaces which the temporary cement had been applied to and removed from and the fractured dentin surfaces after bonding test were examined under scanning electron microscope. The results were as follows : In case of bonding with All-Bond 2, tensile bond strength of each experimental group was lower than that of the control group(p<0.05), but there was no significant difference between the bond strengths of the control group and each experimental group in case of bonding with Super-Bond C&B(p>0.05). No significant difference between tensile bond strength of experimental group, whether temporary cement contains eugenol or not, was seen(p>0.05). In case of bonding with All-Bond 2, the control group showed cohesive-adhesive mixed failure mode and the experimental groups mainly showed adhesive failure mode, but in case of bonding with Super-Bond C&B, almost of the control and the experimental groups mainly showed cohesive failure mode. On SEM examination, all of the dentin specimens pretreated with either 10 % phosphoric acid or 10% citric acid after application of the temporary cements demonstrated remnants of temporary cement attached to dentin surface.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.173-184
• /
• 1969

To elucidate the effect of Amo-1618(4-hydroxyl-5-isopropyl-2-methlphenyl trimethyl ammonium chloride, 1-piperidine carboxylate) known as a kind of growth retardant, on the growth, grain yield, increasing the efficiency of nitrogen fertilizer, behavior of mineral nutritions and the rate of phosphorus utilization, this experiment was conducted pot culture method in a vinyl house. Two nitrogen level, namely, practical nitrogen level(1 N) and three times nitrogen level(3 N) was made and labelled double-calcium-superphosphate $Ca(H_2P^{32}O_4)_2.\;2H_2O)$ as a source of radioactive phosphorus(P-32) was employed $80\;{\mu}c/pot$, respectively. Rice seedlings, variety 'Suwon No. 82', was transplanted to a 1/50,000 a china pot on June 13 in 1968. For treatment, at early stage of tillering, 10,000 ppm solution of Amo-1618 was foliar sprayed only one time. The Duncan's new mutiple-range test was adopted for statistical analysis evaluating experimental data at 5% level significance. The results obtained may be summarized as follows; 1) No significant difference was found among the treatments in plant height, but in plot of Amo-1618 treatment and 3 N level, number of tillers was significantly increased than that of others. 2) Weight of 10,000 kernels and seed-setting rate was also remarkably increased in same treatment above. 3) Grain yield per pot was significantly increased in Amo-1618 and 3 N level application. This results seemed to be due to the increased the factors on the yield. 4) Contents of nitrogen and phosphorus per cent in the grain was likewise increased in Amo-1618 and 3 N application. There is, however, no difference among treatments in the content of nitrogen and phosphorus in the leaves and culms of rice plants. 5) On the other hand, the contents of potassium and magnesium, no distinctly tendeny showed among treatments. 6) The rate of phosphorus utilization was significantly increased in the plot of Amo-1618 and 3 N application.

• Applied Biological Chemistry
• /
• v.5
• /
• pp.7-21
• /
• 1964

가잠(家蠶)(Bombyx mori)의 잠체(蠶體), 용체 및 견사선(絹絲腺)(후부(後部))에서 phenol법(法)으로 RNA를 추출(抽出)하여 RNA의 nucleotide 조성(組成)(mole ratio)을 살피는 한편, 견사선(絹絲腺)(후부(後部))에서 초원심법(超遠沈法)으로 r-RNA, s-RNA를 분리(分離)하여 이에 대(對)한 nucleotide조성(組成)을 조사(調査)하고 또 가잠견사선(家蠶絹絲腺)과 비교(比較)할 목적(目的)으로 거미 방적선(紡績腺)의 t-RNA를 분리(分離)하여 nucleotide성분(成分)을 측정(測定)하여 다음과 같은 결과(結果)를 얻었다. 1) 잠란(蠶卵)에 있어서 이것을 마수(磨粹), 탈지(脫脂) 후(後) lysozyme을 작용(作用)시키고 10% NaCl용액(溶液)으로 가열(加熱) 추출(抽出)하는 새방법(方法)을 고찰(考察)하여 RNA의 추출(抽出)이 극난(極難)한 잠란(蠶卵)에서 RNA를 분리(分離)하는데 성공(成功)하였다. 2) 가잠란(家蠶卵), 잠체(蠶體), 용체 및 견사선(絹絲腺)(후부(後部))의 t-RNA nucleotide 조성(組成)은 다음과 같다. 시료(試料) $\frac{G+C}{A+U}$ $\frac{G+U}{A+C}$ $\frac{Pu}{Py}$ 가잠란(家蠶卵)의 RNA 1.14 1.24 0.99 가잠체(家蠶體)의 RNA 1.40 1.36 0.80 용체의 RNA 1.40 1.33 1.35 후부견사선(後部絹絲腺)의 RNA 1.05 1.32 1.15 이로서 잠체(蠶體). 용체 및 견사선(絹絲腺)의 Pu/Py는 각각(各各) 차이(差異)가 있으나 G+U/A+C는 3자간(者間)에 1.3의 거이 동일(同一)한 수치(數値)를 보여주고 있다. G+C/A+U는 잠체(蠶體)와 용체에 있어서 동일(同一)하나 견사선(絹絲腺)의 그것과는 차이(差異)가 있다. 한편 잠란(蠶卵)에 있어서는 Pu/Py, G+C/A+U, G+U/A+C가 각각(各各) 잠체(蠶體), 용체 및 견사선(絹絲腺)에 있어서와 현저(顯著)한 차이(差異)를 보여주고 있다. G+C/A+U가 1.3이나 되는 RNA의 base ratio를 가진 생물(生物)에 관(關)해서는 아직 보고(報告)된 바 없고 다만 본논문(本論文)의 가잠(家蠶)에 관(關)한 RNA와 속편(續編)인 각종(各種) 패류(貝類) RNA의 nucleotide 조성(組成)에서 모두 1.3에 가까운 수치(數値)를 보여주고 있다. 3) 견사선(絹絲腺)(후부(後部)) t-RNA와 거미 방적선(紡績腺)의 t-RNA의 nucleotide molar ratio 및 견사선(絹絲腺)의 r-RNA, s-RNA nucleotide 조성(組成)은 다음과 같다. 재료(材料) $\frac{G+C}{A+U}$ $\frac{G+U}{A+C}$ $\frac{Pu}{Py}$ 가잠견사선(家蠶絹絲腺)(후부(後部)의 t-RNA 1.05 1.32 1.15의 r-RNA 1.12 1.30 1.20의 s-RNA 1.55 1.33 0.65 지주방적선(蜘蛛紡績腺)의 t-RNA 1.35 1.24 1.16 즉(卽) 가잠견사선(家蠶絹絲腺)(후부(後部))과 거미방적선(紡績腺)의 t-RNA nucleotide 조성(組成)은 Pu/Py가 1.15와 1.16으로서 거이 동일(同一)하지만 G+C/A+U, G+U/A+C에 차이(差異)가 있음을 보았다. 한편 가잠견사선(家蠶絹絲腺)(후부(後部)) r-RNA와 s-RNA의 Pu/Py와 G+C/A+U는 현저(顯著)한 차이(差異)가 있고, G+U/A+C에 있어서는 1.3으로서 거이 동일(同一)한 수치(數値)를 보여주고 있다. 4. 이상(以上)과 같이 잠체(蠶體)에 관(關)한 RNA의 nucleotide 조성(組成)은 소위(所謂) GC-type로서, 현재(現在)까지 문헌(文獻)에 보고(報告)된 각종(各種) 생물(生物)의 RNA의 base ratio에 관(關)하여 비교(比較) 검토(檢討)하였으며, RNA의 nucleotide ratio의 차이(差異)의 의의(意義)에 대(對)하여 고찰(考察)하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4602-4609
• /
• 2013

In summer and winter, the difference between the temperature during the day and that during the night is high, which leads to various problems during concrete placement, such as cracks and defects in the concrete as well as low durability and strength. Although nuclear power plant concrete is widely used for placement in all seasons, particular attention must be paid to its quality during the summer. Therefore, we evaluated the effects of a cooling method for mixing water, which is a commonly used hot weather precooling method, and the use of a retarder, on the characteristics of Nuclear Power Plant concrete. In the cooling method for mixing water, cold water at 5 was used, with 50% of the water content consisting of ice flakes. The effects of using a retarder were evaluated by reviewing the characteristics of the cement at the unset stage and after hardening. To evaluate the characteristics of the unset cement, we measured the slump, air volumes, setting times, and pressure strengths after hardening. Furthermore, we measured the heat of hydration at different temperatures; the loss of heat was minimized using insulation. Both the slump time and the complete ageing time of the air volume were found to be 120 min at $20^{\circ}C$ and 40 min at $40^{\circ}C$. In the case when the cooling method for mixing water was used and in the case when a retarder was used, the initial and final sets by penetration resistance were delayed, and the delay decreased with increasing air temperature. For the heat of hydration, the cooling method for mixing water not only lowered the maximum temperature but also delayed its attainment. However, the use of a retarder had no effect on the maximum temperature. Moreover, in the early ages (e.g., 3 and 7 days), the pressure strength of the concrete was lower than that of plain cement. However, the strength of 28-day concrete met the standard construction specifications.

• Korean Journal of Soil Science and Fertilizer
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1970

A pot experiment of paddy rice was carried out primarily to find out the effect of potash in relation to the application of wollastonite on paddy rice. The result which showed increased paddy rice yield has been evaluated from the factors of yield, yield components, soil and plant analysis data at different stages of plant growth and the summary of review is described as follows : 1. Effect of potash is likely to be greater in the presence of wollastonite and a larger quantity of wollastonite application would require correspondingly larger quantities of potash. 2. Application of potash and wollastonite resulted increased paddy rice yield may be largely due to increased contents of potassium, calcium and silica in the soil and increased concentration of $K_2O$, CaO and $SiO_2$, $SiO_2/N$ ratio and $K_2O/N$ ratio in rice straw. 3. The maximum paddy rice yield, at less than 300kg/10a application of wollastonite was obtained by applying 8kg of $K_2O$ per 10 are while 600kg/10a application of wollastonite gave the maximum yield by applying 16kg of $K_2O$ application per 10 are. 4. Application of wollastonite decreased the number of ears per hill and number of grains per ear. While ripening percentage and 1,000 grain weight tended to increase with wollastonite. The increased contents of CaO and $SiO_2$ in straw due to wollastonite application showed a negative correlation with the number of ears per hill and the number of grains per ear but a positive correlation was shown with ripening percentage and 1,000 grains weight. 5. Potash application appeared to be increasing the number of ears per hill and the number of grains per ear. There was a positive correlation exist between the higher content of $K_2O$ in rice straw and the number of grains per ear 6. Amount of nitrogen absorbed tended to decrease with increase in quantities of potash and wollastonite but the ratio of $SiO_2/N$ was increased by further application of potash and wollastonite. 7. $K_2O/N$ ratio was increased with incrementing in quantities of potash application but in the absence of potash, $K_2O/N$ ratio was decreased as to increasing wollastonite application.

• Journal of the Korean Society of Radiology
• /
• v.8 no.4
• /
• pp.189-201
• /
• 2014

The purpose of this study was to survey guardian's opinion on assisting pediatric radiography and their level of awareness of radiation, improving the quality of pediatric radiography. In this study, the recognition was analyzed for 210 parents of child patients in Pusan National University Hospital from August 20 to September 15, 2013. A total of 66.2 percent of the respondents said they had participated in pediatric radiography in the past. The reason why they did is "Radiologist's request", the highest. According to the survey, 84.3 percent said they thought it is necessary to attending patient in pediatric radiography. "The stability of the child" is the reason for it. And respondents who thought there's no need to do that answered back, the reason for this is "Radiologist's work." There was a significant difference on the psychological state for the medical radiation by gender and child age. (p<0.05) In the analysis of recognition for the radiation, there was the significance by gender and education. (p<0.05) Regarding the awareness of the radiation protector, there was a statistical significance in age, gender, child age and education. (p<0.05) Considering the results, pediatric patient's guardians recognized that it is necessary to attend a child on X-ray for their child's stability and accurate exam above all. It must make guardians wear X-ray protector and radiologist should let the guardians recognize the X-ray examination method, before starting pediatric x-ray. It needs to improve the atmosphere of the examination room and to be considered to take visual and auditory approaches in comfort for reducing the children's fear and anxiety.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.2
• /
• pp.98-107
• /
• 1983

This experiment was carried out to determine the optimum fertilizer level of N-P-K for maximum yield of grasses at hill-land pasture. The pasture species tested were orchardgrass, tall fescue, alfalfa and ladino clover. The results are summarized as follows: 1. The difference in yield of treatment 1, 2, and 4, 5 was significant at the 5% level. In other word, alfalfa yields from 6-30-30 kg/10a and 6-40-30 kg/10a (N-P-K) application were significantly increased over the yields from 4-20-20 kg/10a and 4-30-20 kg/10a (N-P-K). In observing the yield from the treatment 5 where 10 kilograms of phosphate was additionally applied over the treatment 4, it was increased in yield but failed to show statistical significance. With these results, the most optimum rates of N-P-K for alfalfa production are 6-30-30 kg/10a. 2. Ladino clover showed the highest yield at treatment 6 with statistic significance at the 1 percent level over the other treatments. Therefore, NPK rates of 6-30-40 kg/10a would be the most optimal rates for maximum production of ladino clover. 3. Orchard grass yield showed significance at the 1 percent level among other treatments except treatment 3 and 4. The highest yield was also shown at treatment 6 where NPK rates applied 40-30-40 kg/10a. 4. Tall fescue yield showed high significance at the 1 percent except treatments between 2 and 3, 5 and 6. The highest yield was observed at treatment 6 where NPK was applied 40-30-40 kilograms per 10a. 5. Nitrogen content of dry matter was 0.91-1.05% in 20 kg of N and 1.05-1.26% in 30-40 kg of N per 10a. The absorption rate of nitrogen applied was 23-31% regardless of the nitrogen level. Potash content of dry matter was increased in accordance with increasing K rates. 6. The gross income was the highest on the N-P-K application of 4-20-30 kg/10a in alfalfa and ladion clover, 40-30-40 kg/10a in orchardgrass and 30-20-20 kg/10a in tall fescus.

• Journal of Korean Society of Forest Science
• /
• v.73 no.1
• /
• pp.14-20
• /
• 1986

The processing times of the works, chainsaw felling, axe trimming and hand skidding to the corridor, by one-man-work method per single pole timber were investigated in the thinning young Japanese larch stand at the Training Forests of the Forest Work Tranining Center in Kangwon-do. The works were performed by a skilled worker with the craftman qualification and 69 trees were cut. Time was checked at intervals of 25/100 minute by the multimoment method and the worker's efficiency was evaluated for every cycle. Total working time was 8.11 hours of which 90% was for thinning work and 10% for cleaning work. Of the total working hours, 82.7% was net working time, 12.3% was general working time and 4.9% was non-valuated time. Of the net working time, 5.9hours, for only thinning, 20.9% was spent on moving to the feeling tree, 27.1% was spent on felling, 40.5% was spent on trimming and 11.5% was spent on skidding to corridor. Net chainsaw operating time was 0.94 hour which included 0.2 hour for cleaning work. Of the net chainsaw operating time, 0.94 hour, 66% was operating time and 34% was idle running time. The basic and general working times by DBH classes with application of 130% worker's efficiency calculated from regression equations were shown in table 1. For better practical using of this table, the simplified proposal was given in table 2.