• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.105-106
• /
• 2017

The metal spray method, one of the surface anti-corrosion methods to prevent the corrosion of the steel material, does little effects on the material, while it can be used on a wider surface. However, metal spraying is used only in a limited environment, and research on the case of using with concrete is lacking. The purpose of this study was to observe the corrosion behavior of steels with metal spray coatings in concrete using electrochemical methods And to evaluate the performance of the method according to the type of metal used in the metal spray. As a result, the Al metal spray coating showed the best performance, because Aluminum is oxidized in the cement mortar and forms alumina oxide film.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.154-155
• /
• 2016

Oyster shell is light weighted and its strength characteristic is similar to sand. So we produced mortar test piece using grounded oyster shell powder under 0.5mm, which is a standard of fine aggregate, and reviewed strength properties according to water cement ratio. In our test, we used two kinds of oyster shell particles: below 0.6mm and 1.2~2.5mm. Water cement ratio is varied 40% to 100% and we found that flexural strength and compressive strength are decreased in higher water cement ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.263-264
• /
• 2012

The purpose of present study is to examine the long-term strength improvement of hardener-free epoxy-modified mortars with steam curing. As a result, strength improvement of hardener-free epoxy-modified mortars is markedly improved with increasing of air-dry curing period. This is improved by markedly increase the degree of hardening of the hardener-free epoxy resin in the epoxy-modified mortars with additional air-dry curing period.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.105-107
• /
• 2012

This study was conducted to investigate the strength development of fly ash concrete using the strength development estimation for the ready mixed concrete for construction of nuclear reactors. The findings are as follows. First, the higher the curing temperature becomes, the shorter the setting time becomes. In addition, the compressive strength also increased as the curing temperature gets higher. The apparent activation energy derived from ASTM C 1074 showed 34.75 KJ/mol. The results of concrete strength estimation confirmed that Gompertz model formula has good accuracy.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.281-286
• /
• 2003

This study presents the results of investigations with the object to determine the resistance to sulfuric acid for some kinds of cements containing 0%-70% of slag powder. The specimen is immersed 5% H$_2$SO$_4$ solution after the 28th days, is measured chemical analysis, XRD, SEM and etc after the immersed 35th days and is measured the erosion depth after the immersed 168th days. The results of experiment are founded out that alumina cement containing slag power was excellent at a point of view for the sulfuric acid resistance and the erosion depth was suitable to the evaluated method of the sulfuric acid resistance in the stead of the evaluated method of weight loss.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.130-131
• /
• 2016

In this study, moisture absorption coefficient and efflorescence properties of Ordinary Portland cement and alkali-activated slag cement mortar were assessed according to their red mud substitution ratio. Tests were conducted to determine the cause of efflorescence, which is a significant obstacle to the recycling of red mud as a sodium activator in alkali-activated slag cement, and to find a method to control efflorescence.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.2
• /
• pp.191-197
• /
• 2001

In this study, the admixtures for agents for enduring cold weather used widely are collected and applied to cement mortar to analyze the strength development due to variation of curing temperature at early age. The test results show that anti-freezing admixture have some problems due to high chloride content, which may cause the corrosion of reinforcement embedded in concrete. However, the mortar applied by accelerator and another kind of agent for enduring cold weather produced by S company lead to delay of strength development in low temperature. Also, it is clarified that there are no significant problems for cement mortar in strength development due to low temperature if a suitable kind of agent enduring cold weather is used and cement mortar is cured for more than $7.5^{\circ}D.D$ at early age.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.933-938
• /
• 2000

Concrete has been used for many years as a composite material that has excellent mechanical properties and durability for construction. However, concrete is a poor electrical conductor, especially under dry conditions. Concrete that is excellent in both mechanical and electrical conductivity properties may have important applications in the electrical, electronic, military and construction industry(e.g. for de-icing road from snow). The purpose of this investigation is to improve the electrical conductive of cement mortar preparared with coke dust, graphite, carbon black and carbon fiber as filler. From the test result, as the content of electrically conductive material increased, fluidity and strength decreased but resistivity decreased. The resistivity of electrical conductive cement mortar is effect by water/cement, and aggregate. Cement mortar containing carbon fiber has the best electrical properties considering strength. From this study, it is enough to assure the use of carbon fiber, carbon black and graphite as a conductive filler for electrical conductive cement mortar.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1248-1251
• /
• 2000

Recently, the yearly amount of remicon used in Korea is approximately one hundred million cubic meter, and it caused a by-product, remicon waste sludge. The sludge produced by washing mixers or drums of remicon trucks is restrained by the law for waste disposal because its pH is over 12, so the expense for waste disposal is needed. Until now, the waste sludge water has been recycled and used for concrete materials as sludge water which is limited to 3% of cement unit weight. However, the study on the properties of the concrete mixed with this waste sludge is so insufficient that the quality of them can be hardly trusted. Therefore, the study on that will be discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.309-312
• /
• 2005

Admixture compounds for shortening setting time and accelerating early strength development of EVA polymer powder-modified mortars were made by mixing various quick setting agents. As a result, the quick setting agents contribute to strength development of the mortars in the early curing age of 168h or less. In the viewpoint of early strength development of EVA polymer powder-modified mortars, an quick setting agent content of 20$\%$ is recommended. Early strength of EVA polymer powder-modified mortars expresses the excellent strength with 5$\%$, 10$\%$ of rates of polymer mixing. The rate of polymer mixing was able to be adjusted and flexural strength which is a predeterminded initial strength was also able to satisfy 3MPa(s).