• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.69-70
• /
• 2009

단거리에서의 MCU들의 통신을 위해서 직렬방식의 통신이 많이 사용되어지고 있다. 이러한 시리얼 통신에서도 통신 규격을 변경하면 일대일 통신뿐만 아니라 다대다 통신을 통한 네트워크 구성도 가능하다. 네트워크로 구성되어지는 시리얼 통신에서 각 MCU들의 원활한 통신을 위한 방법이 필요하기 때문에, 본 논문에서는 그 방법을 Ethernet의 패킷 데이터그램 형태를 응용하여 시리얼 통신에서의 데이터 패킷을 메시지단위로 통신하는 방법을 제안한다.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.257-264
• /
• 2014

Through MCU model, Radio Frequency communication is completed using universal asynchronous receiver and transmitter. The communicatin with PC and MCU is completed using RS-232 cable. At first interconnected communication with PC and MCU is necessary for RF communication because tha UART is based technique for RF communication. Program imbeded in microcontroller unit is ran during RF signal is transmitted to other RF module. Data connected with PC and MCU is transmitted between PC and MCU during PC and MCU is connected.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.131-134
• /
• 2024

본 논문에서는 기존 철도 운영 및 관리시에 철도 주변환경으로 부터 발생하는 소음, 진동, 미세먼지 센서에서 다양한 실시간 스트림 데이터를 감지하고 정형화된된 데이터 패턴을 인식하고 분석할 수 있도록 데이터를 구성 및 저장하고 분석된 데이터를 표현할 수 있도록 시각화 지원을 위한 모니터링 시스템 플랫폼을 구현하였다. 데이터 전송을 위해 시리얼 통신 기법을 주로 적용하였으나, 센서와 디바이스의 증가로 인해 시리얼 통신의 한계가 나타났다. 따라서, 본 연구에서는 기존의 아두이노와 서버 간의 직접 통신 방식 대신 라즈베리파이를 도입하여 MQTT Broker(브로커)를 설치하고 통신을 진행하였다. 철도 데이터 모니터링 시스템 플랫폼은 NoSQL 데이터베이스인 MonGoDB와 데이터 시각화할 수 있는 Grafana를 이용하여 구축하였다.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.263-269
• /
• 2015

This paper suggest remote control technic using TCP/IP protocol network after UART serial communication implemented through RS-232 cable to ethernet module. This is multidisplinary signal technique which is PC signal is converted to internet communication signal. Ethernet module is WIZ1000SR. This is gate module which convert RS-232 protocol to TCP/IP protocol. This module convert serial data transmitted serial device to TCP/IP type data, in contrast TCP/IP data received through network converted to serial data transmitted to serial device. This paper propose that the lower subnet internet layer UDP module make the higher speed in control board than TCP/IP signal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.35-40
• /
• 2023

In this paper, a serial wireless LAN virtual communication module that allows microprocessors to communicate wirelessly with other peripheral devices is developed as part of a study to build an online virtual experiment system that allows them to practice virtually anytime, anywhere in microprocessor application education in electrical and electronic control engineering. The developed module is connected to the microprocessor in the virtual experiment system through serial interface. The serial data is sent to and received from peripheral devices through the wireless LAN interface of the host computer where the virtual experiment software is being performed. In order to verify the function of the developed serial wireless LAN virtual communication module, experiments were conducted in which a microprocessor in the virtual experiment system exchanged data with an Android smartphone through a wireless LAN interface of a host computer. The developed serial wireless LAN communication module is expected to enable virtual microprocessors to communicate with surrounding real devices through wireless LAN, which can be efficiently used in microprocessor application education.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.45-52
• /
• 2002

This paper presents fault detection scheme of Brushless DC(BLDC) motor drive system by estimating BLDC motor resistance using motor input and output data which is transmitted from data acquisition board to host computer over serial communication channel. Since communication time delay has a serious effect on performance, we use periodic and fixed communication protocol. Hence, the delay time is priory known. Simplified BLDC motor model and recursive least square algorithm is used for estimating motor resistance. By experiment result, we confirm the proposed scheme.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.179-186
• /
• 2007

KTX control systems mutually control OBCS, ATC, MBU, TECA, MDT, ABU, HVAC, TRAE, PID and FDTR, KTX OBCS as master, and controls other sub-control devices as slave, using various serial lines. In order to analyze physical structure of various serial link lines and mutual data transmission structure, serial line analyzer is used in many ways. To use serial line analyzer, prior and professional technics about High Speed Train and experience of using device are necessary. In spite of difficult situation of space and environment where we work for maintenance of High Speed Train, in presenting basic structure about physical connection method aquired by sub-device serial line data collection and about communication data analysis, I hope that this research will be helpful for the person who work for similar area. Also, I hope that this research will help diagnostic work of High Speed Train, which is necessary for test run of independently developed High Speed Train.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.6
• /
• pp.1143-1156
• /
• 2013

Power control system like SCADA(Supervisory Control And Data Acquisition) is gathering information using RS232C and low-speed analog communication network. In general, these methods are known as secure because of the secure characteristics from the analog based communication network and serial communication. In this study, first we build DNP communication environment using commercial power control simulator and find some vulnerabilities by testing from the viewpoint of confidentiality, integrity and availability. Consequently, we see the necessity of a valid method for authentication and data encryption when gathering information, even though that is known as secure so far. Discussion of needs of DNP authentication and data encryption is started about several years ago, but there is still nowhere applied that on real environment because the current methods can not fully meet the security requirements of the real environment. This paper suggests a solution to the vulnerabilities, and propose some considerations for enhancing power control system's security level by applying DNP authentication and data encryption.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.91-93
• /
• 2002

인터넷의 대중화로 인해 많은 SOHO 창업이 이루어지고 있다. 기존의 대기업을 상대로 한 사무용기기, 통신기기가 SOHO를 상대로 개발되고 있었으며, 이에 국선과 내선 또는 내선 사용자 상호간을 연결시켜 주는 중소형급 PBX가 통신비 절감 및 수익의 창출을 가져왔다. 본 논문에서는 이러한 PBX의 상태를 시리얼 통신을 통해 실시간으로 보여주는 모니터링 시스템을 설계 및 구현하였다. 구현된 시스템은 전송된 데이터를 통해 PBX와 연결된 국선과 내선의 상태, 발신자 정보를 서버 클라이언트 구조로 내선 사용자의 PC에 나타냄과 동시에 통화내역을 데이터베이스로 관리할 수 있게 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2684-2690
• /
• 2009

The existing mobile learning service is the method that provides data packets in real time. It has some problems of much data packet cost and delay to provide the mobile learning service. In this paper, to solve the problems, we suggest to implementation of the mobile learning system of the new method using serial communication.