• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.157.2-157.2
• /
• 2005

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.924-927
• /
• 2007

In this study, adaptation of two-way shape memory effect of SMA wire to the actuator is examined. Therefore the SMA characteristics which are training, material properties, response time at different thermal cycling rates are tested. During training, permanent deformation is accumulated till a certain number of cycle and then saturated. The amount of two-way strain is unchangeable over all cycle and the slope of strain(or stress)-temperature curve is slower as the increase of applied stress. The rate effect is observed resulted from the thermal distribution which heating profile differs from cooling as thermal cycling time. Using the estimated SMA properties, an experimental test for the simple smart wing is performed.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.15-26
• /
• 2014

This study focus on a economic value of the Big Data technologies by real options model using big data technology company's stock price to determine the price of the economic value of incremental assessed value. For estimating stochastic process of company's stock price by big data technology to extract the incremental shares, Generalized Moments Method (GMM) are used. Option value for Black-Scholes partial differential equation was derived, in which finite difference numerical methods to obtain the Big Data technology was introduced to estimate the economic value. As a result, a option value of big data technology investment is 38.5 billion under assumption which investment cost is 50 million won and time value is a about 1 million, respectively. Thus, introduction of big data technology to create a substantial effect on corporate profits, is valuable and there are an effects on the additional time value. Sensitivity analysis of lower underlying asset value appear decreased options value and the lower investment cost showed increased options value. A volatility are not sensitive on the option value due to the big data technological characteristics which are low stock volatility and introduction periods.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.133-140
• /
• 2019

In this paper, the penetration process of Shaped charge jet(SCJ) was simulated through finite element analysis to obtain physical quantities such as jet incidence velocity, penetration rate, and penetration increment. As a result of applying these physical quantities to the hydrodynamic theory, it was confirmed that the penetration efficiency of the jet with a high incident velocity is higher than that of the following slow jet. This efficiency decreased sharply when the jet was slower than the hydrodynamic limit(HL). On the other hand, the comparison of penetration increment and jet consumption over time showed that the length extension effect should be considered for SCJ's theoretical penetration analysis.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.71-78
• /
• 1998

Inversion schemes of 2-D MT survey data generally take enormous computational time and computer memory. In addition, careful attention must be paid in handling MT data, especially in cases of TM mode, inversion results can be seriously distorted because of static effect caused by current channeling across inhomogeneous surface boundaries. There-fore inversion algorithm using the GRRI scheme for TM mode MT data was implemented. This scheme is based on a perturbation analysis with a locally 2-D analysis and local inversions were sequently performed over each divided section without additional forward modelings. The algorithm was applied to several synthetic data for the purpose of verification of its efficiency and applicability. With less computer resources than conventional schemes, it could handle static effect directly by including current channeling across inhomogeneous boundaries. Thus it is expected to be used for an useful tool such as a real-time inversion scheme in the field.

• Management & Information Systems Review
• /
• v.35 no.4
• /
• pp.37-56
• /
• 2016

This study investigates how adapting of K-IFRS effects NI and OCI affecting of credit rating on changing of the period and variable by using samples of around adapting of K-IFRS. First of all, after adapting of K-IFRS(2011-2013), it was noticeable that how NI affecting after adapting of K-IFRS(2007-2010) had been increased more than that of before affecting of K-IFRS. However, there was not a single difference in affecting OCI on credit rating comparing to the past of adapting of K-IFRS. Second, it seemed like NI affected more after adapting of K-IFRS(2011-2013). The first year of K-IFRS had bigger incremental effect than after adapting of K-IFRS. However, after adapting of K-IFRS, OCI affecting on credit rating had no ncremental effect. Third, it seemed like NI in the first year affected more than OCI on credit rating. After adapting(2012-2013) of K-IFRS, it seemed like NI and OCI do not affect on credit rating. To interpret this, NI and OCI affected the first year of adapting of K-IFRS; therefore, adapting of K-IFRS affected without affecting financial ratio on adapting credit rating. As the time goes on, it can be expected that adapting K-IFRS became stable; therefore, extra incremental effect will not be seen comparing to the early adaption. The implication of this study is when information users use credit rating, they have to concern of affecting of K-IFRS. This is because NI in financial ratio is affecting on credit rating.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.2
• /
• pp.181-188
• /
• 1993

In this study, a numerical method for the material nonlinear analysis of reinforced concrete shell structures including the time dependent effects due to creep and shrinkage is developed. Degenerate shell elements with the layered approach are used. The perfect or strain hardening plasticity model in compression and the linearly elastic model in tension until cracking for concrete are employed. The reinforcing bars are considered as a steel layer of equivalent thickness. Each :steel layer has an uniaxial behaviour resisting only the axial force in the bar direction. A bilinear idealization is adopted to model elasto-plastic stress-strain relationships. For the nonlinear anaysis, incremental load method combined with unbalanced load iterations for each load increment is used. To include time dependent effects of concrete, time domain is divided into several time steps which may have different length. Some numerical examples are presented to study the validity and applicability of the present method. The results are compared with experimental and numerical results obtained by other investigator.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.57-70
• /
• 2006

This paper describes a new effective algorithm to estimate routing congestion and to resolve highly congested regions for a given detailed placement. The major features of the proposed technique can be summarized as follows. Firstly, if there are congested regions due to some nets which pass through the regions it can determine which cells affect those congested spots seriously and moves some of them to resolve congestion effectively. Secondly, since the proposed technique uses the ripple movement technique to move cells it resolves congestion without sacrificing wire length. Thirdly, we use an efficient incremental data structure to trace the changes in congestion and wire length as cells move. Hence, selection of cells to move could be very accurate and fast in the course of iteration. Finally, although an MST net model is used to resolve congestion in this paper, proposed technique can be work with any net model. Particularly, if proposed technique can obtain routing information from a real router, congestion can be resolved more effectively. Experimental results show that the proposed technique can resolve congestion effectively and efficiently without sacrificing wire length.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.2
• /
• pp.23-29
• /
• 2008

The purpose of this research is to assess the application of recycled-aggregate that is gained from construction wastes as the material of compaction pile method. At the same time, the development of the new technique rectifies defects of the existing compaction pile method for soft ground improvement. In this research, laboratory chamber tests were carried out analyzing the effect of the soft ground improvement by porous concrete pile using recycled aggregate. Through the results of the laboratory chamber tests, the variations of settlement, excess pore pressure, and increment of the vertical stress with time and the behavior of the composite ground were elucidated.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2008.11a
• /
• pp.428-432
• /
• 2008

대수층의 저유량이 풍부한 강변여과수 개발 예정지역의 충적충(지표면하 25$\sim$35 m 구간)에서 수리전도도와 증분산지수의 규모종속효과를 규명하기 위해 양수시험과 수렴흐름 추적자시험이 수행되었다. 양수시험과 추적자시험의 규모는 2 m 와 5 m 이었으며 양수시험은 5개 공, 추적자시험은 3개 공을 이용하여 수행되었다. 양수시험은 일정한 양수율(2,500 m$^3$/day)로 수행되었으며, 양수 시작 후 경과시간에 따른 수위변화 자료를 AQTESOLV 3.5 프로그램에 입력하여 해석하였다. 시험대수층의 수리전도도는 양수정에서 1.745$\times$10$^{-3}$ m/sec, 양수정에서 이격거리가 2 m 구간에서는 2.161$\times$10$^{-3}$ m/sec와 2.270$\times$10$^{-3}$ m/sec 이었으며, 이격거리가 5 m 구간에서는 2.452$\times$10$^{-3}$ m/sec와 2.591$\times$10$^{-3}$ m/sec로 산정되었다. 그리고, 양수정에서 회복시험 시 Theis(Recovery) 방법에 의해 해석된 수리전도도는 1.603$\times$10$^{-3}$ m/sec이었다. 양수정에서 관측정의 이격거리(d)에 따른 수리전도도(K) 증가함수는 log K = 0.0693logd-2.071와 log K = 0.08171og d-2.655로 추정되었으며, 결정계수는 각각 0.965와 0.979로서 매우 높게 나타났다. 따라서 양수정에서의 이격거리가 멀수록 수리전도도가 증가하는 규모종속을 확인하였으며, 또한 시험대수층의 수리전도도가 방사상으로 유사하게 분포하고 있음을 알 수 있었다. 수렴흐름 추적자시험의 양수율은 2,500 m$^3$/day 이었으며, 2개의 주입정에 염소이온 5 kg을 순간 주입하였다. 염소이온의 농도이력곡선을 작성하여 초기도달시간과 최고농도의 차이를 분석하였으며, 누적질량회수곡선을 통해 양수 후 경과시간에 따른 염소이온의 질량회수율을 분석하였다. 그리고, 염소이온농도 대 누적질량회수율의 이력그래프를 작성하여 누적질량회수율에 따른 염소이온농도의 증가와 감소 변화를 분석하였다. 또한, 염소이온농도의 증가/감소 구간에 대한 선형회귀분석을 수행하여 농도 증가율과 감소율의 변화를 파악하였다. 양수정에서 관측된 경과시간별 염소이온농도 자료를 CATTI 코드의 "Converging Radial Flow With Instantaneous Injection" 해석법에 적용하여 종분산지수를 추정하였다. 양수정에서 이격거리가 2 m인 경우의 종분산지수는 0.4152 m, 이격거리가 5 m인 경우의 종분산지수는 3.2665 m 이었다. 따라서 양수정에서 이격거리가 멀수록 종분산지수가 증가하는 규모종속효과를 확인하였으며, 또한 이격거리에 대한 종분산지수의 비는 각각 0.21과 0.65 정도로서 증가하였다.