• Computational Structural Engineering
• /
• v.35 no.1
• /
• pp.11-16
• /
• 2022

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.558-562
• /
• 1999

For 6H-SiC crystals which was obtained by sublimation growth, the formation of micropipes and internal planar defects was discussed in consideration of the inter-relationship between mass adsorption behavior and the defects origin on the growth interface on the basis of KSV theory and the the step growth pattern on the vicinal plane. Micropipes and planar defects was formed in the region which the step could not be grown by impurities impinging. It was realized that the internal defects formation was related to the crystallographic step planes formed on the growth interface and the migration of the molecules adsorbed on it.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2088-2098
• /
• 1993

A mathematical model of freeze drying by sublimation was suggested and used to estimate the drying time. Under the various conditions, the drying time of pure water and carrot was numerically calculated for the suggested model. Optimal policies of freeze drying were investigated experimentally in a laboratory freeze dryer. It was found that the shortest drying times could be obtained when the chamber pressure and condenser temperature were kept at their lowest values and the best method of heat transfer for sublimation was the conduction involving radiation. The sublimation drying period was finished when the bottom temperature of material could be reached at near $0^{\circ}C$ from frozen temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2001

SiC single crystals were grown in the various condition of growth pressure and temperature in the sublimation growth. We observed the growth step morphology and the shapes on the surface of as-grown crystals using an optical microscope, and characterized the co-relations among the growth parameters by adapting the Burton, Carbera and Frank theory(BCF theory)for nucleation and crystal growth.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.2
• /
• pp.68-71
• /
• 2008

AlN crystals were grown by the sublimation process. As grown AlN crystals were the polycrystalline boule in the form of the agglomerate of small AlN single crystalline AlN. As-grown AlN boule has a length about 2${\sim}$3 mm long and a diameter of 1 inch. The carbon impurities were observed on the surface and inside of the grown AlN crystals and the growth behavior was investigated by optical microscopy and SEM observation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.685-693
• /
• 1990

The heat transfer coefficients were calculated numerically to see the effects of radiation around the porous medium put on the flat plate at a distance from the leading edge of flat plate for the two-dimensional laminar flows. To verify the analytical model developed and invoke the heat/mass transfer analogy, an experiment was carried out using naphthalene sublimation technique. From the effects of the wake, Sherwood number is maximum around the region where the porous medium is attached. The theoretical results correspond well with the experimental results at small Darcy number. Permeability of ceramic blocks used for experiment was also measured and the Forchheimer equation is applicable in our measurement range.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.824-827
• /
• 2009

• 발명특허
• /
• v.26 no.10 s.306
• /
• pp.76-83
• /
• 2001

본 발명은 승화성 고체 미립자 제트를 이용한 분사로 표면의 오염물을 제거하는 공정이다. 이는 극저온에서 고화된 입자가 표면에 고속 충돌 후 오염물을 제거하고 자신은 승화되어 잔사를 남기지 않는 청정 세척 공정을 말하는데 반도체 장비, 정밀 제품, 인쇄회로 기판 등의 다양한 표면의 각종 오염막 제거에 널리 사용될 수 있다. 본 장치의 특징은 세정 매체인 $CO_2$와 Carrier gas인 $N_2$를 사용하였고 현재 특허에 출원되어 있는 단순한 액체$CO_2$를 이용한 세정범위를 넘어 다양한 세정매체 즉, 복합인자($CO_2$ + ice, Ar + ice)를 이용하여 세정효율의 다변화를 이루었고 자체 개발한 냉동기를 이용하여 고화율이 액체 $CO_2$보다 상대적으로 낮은 기체 $CO_2$의 고화율을 증대 시킴으로써, 세정매체의 소모시간이 현격히 감소되어 원가절감 효과를 증대 시켰다. 세정대상물을 효과적으로 제거하기 위해 주 세정 매체인 $CO_2$의 수농도를 조절할 수 있는 Multi-Nozzle의 개발과 이로 인하여 세정력의 강도를 조절하도록 하였다. 세정 후 발생되는 오염입자를 효과적으로 제거하도록 국부 Exhaust를 Nozzle전단에 달아 재 오염의 방지효과를 극대화 시켰다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.347-348
• /
• 2022

본 연구에서는 무인이동체를 활용한 철도교량의 외관조사 점검을 보다 효율적이고 객관성 있게 수행하기 위하여 무인이동체를 통해 촬영된 이미지를 딥러닝 기반 분석기술을 활용하여 손상 자동으로 분석 하기위한 기술을 연구하였다. 철도교량의 외관 손상 중 균열, 콘크리트 박리·박락, 누수, 철근노출에 대한 손상 이미지를 추출하여 딥러닝 분석 모델을 생성하고 학습한 분석 모델을 적용한 시스템을 실제 현장에 적용 테스트를 수행하였으며 학습 구현된 분석모델의 검측 재현율을 검토한 결과 평균 95%이상의 감지성능을 검토할 수 있었다. 개발 제안된 자동손상분석 기술은 기존 육안점검 결과 대비 보다 객관적이고 정밀한 손상 검측이 가능하며 철도 유지관리 분야에서 무인이동체를 활용한 외관조사 업무를 수행함에 있어 기존 대비 객관적인 결과도출과 소요시간, 비용저감이 가능할 것으로 기대된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.05a
• /
• pp.125-125
• /
• 1998