• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.2
• /
• pp.313-319
• /
• 2013

This study shows the results of safety analysis obtained from the three different wire rope connections in the RPSD (Rope Platform Screen Door) system, which are the rope connected at both ends, the ropes connected by a pulley at both ends, and the ropes connected by many pulleys at both ends. With a constant load applied, the displacements in the ropes connected by a pulley at both ends and the ropes connected by many pulleys at both ends are smaller than that in the rope connected at both ends. There are no any special different displacements between the ropes connected by a pulley at both ends and the ropes connected by many pulleys at both ends. The displacement in the wire rope diameter of 6mm is smallest of 4.83mm and the strains from the displacements in the ropes connected by a pulley at both ends and the ropes connected by many pulleys at both ends are very small.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.824-829
• /
• 2016

Passenger casualties in the case of ship accidents have increased because of the increase in size and complexity of current ships (such as cruise ships). Therefore, in recent years, emergency evacuation systems are receiving increased interest so as to ensure the safety of passengers. Currently, there are only basic instructions provided, such as announcements regarding the situation, alarms, and exit signs; however, no guidance toward a proper escape route has yet been provided. To solve this problem, several emergency guiding schemes have been proposed. However, these systems ignore some of the realities of ship accidents and are impractical because various risk factors are not considered. Therefore, this paper proposes an optimal route guiding system based on an $A^*$ algorithm for emergency escape during disaster situations. This system takes into account various possible risk factors. Performance evaluation using computer simulations showed that the proposed scheme is effective and leads to safe escape routes.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.174-174
• /
• 2013

현재 자동차 강판 시장에서는 승객들의 안전 확보와 연비 향상을 위하여 자동차 강판의 경량화 및 고장력화가 급속히 진행되고 있다. 더불어 소비자는 더욱 아름답고 멋있는 외관을 추구하면서 정교한 디자인이 가능할 수 있도록 높은 성형성을 갖는 강판에 대한 요구도 또한 증대되고 있다. 따라서 강도와 성형성을 동시에 확보할 수 있는 DP형, TRIP형 등의 다양한 컨셉을 갖는 변태강화형 고장력강에 대한 개발 요구가 점점 심화되고 있으나 이들 고장력강의 상 제어를 위하여 첨가된 Si, Mn등의 성분들이 표면에 안정한 산화물을 형성하기 때문에 이러한 고장력강은 표면 품질이 열위한 것으로 보고 되고 있다. 따라서 기존 연구에서는 열처리중 표면으로 확산되어 올라오는 Si, Mn 산화물의 저감을 위하여 분위기 중 산소농도나 노점등을 조절하거나, 산화전처리, 선도금처리 등을 통하여 Si, Mn 의 표면 선택산화를 제어하여 도금 결함을 최소화하려는 연구가 많이 진행되고 있다. 그러나 이러한 연구들은 대부분 강판 표면에서의 산화/환원의 반응에 대한 분위기 요인을 제어하는 연구들이며 실제 Si, Mn등의 산화성 원소들이 어떠한 조건에서 어떠한 경로들을 통해서 이동하여 표면으로 올라오는지에 대한 연구는 부족한 상황이다. 따라서 본 연구에서는 산화성 원소들의 표면 확산 거동에 대한 고찰을 위하여 다양한 열처리 온도 조건을 통한 표면 도금성 경향, 합급화 경향 및 표면 분석결과를 바탕으로 확산 거동에 대한 경향을 밝히고자 하였다.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.1
• /
• pp.32-36
• /
• 2017

In order to reduce the damage of life and property caused by an automobile accident, we should design new car models and safety standard with reference to the data analysis and in-depth investigation of the accident. In-depth research and analysis of the current world other than the police investigation team (GIDAS, iGLAD, NHTSA, etc.) and collect in-depth data. Going to develop a safety policy to make it much safer cars based on this data. However, the country still does not have the advantage of KIDAS data Safety Policy Direction. In KNCAP tests, there is nothing in order to protect far side passengers even if far side impact causes approximately 50% injured people. Based on DBs like KIDAS (Korean In-Depth Accident Study) and GIDAS, far side passengers got injured as much as near side passengers did. So as to protect far side passengers, KNCAP has to change the test method of side crashes. In this study, injury severities to compare with ES-2, World SID and Thor dummies and the movements of far and near side passengers, SLED TEST was used.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.39-40
• /
• 2019

우리나라는 국제해사기구(IMO)에 "여객선 탈출지도체계의 기술개발에 관한 정보"라는 안건(IMO SSE4/INF2)을 2017년에 제출한 바 있다. 이 의제에 소개된 지능형 선박 및 인명대피 안내시스템(SEGA)은 한국해양과학기술원의 주관으로 한국해양수산부의 지원을 받아 2016년부터 2020년 3월까지 약 4년간의 프로젝트로 개발 중에 있다. SEGA는 데이터 수집과 분석, 정보 표시의 프로세스를 자동화하여 우리나라 연안에서 항해 중인 선박에 비상상황이 발생할 경우 항해자의 의사결정을 지원하는 시스템이다. SEGA 시스템을 지원하기 위해 구축된 SEGA 서버와 데이터베이스는 해양기상정보, 수심정보, 해상교통정보를 처리 한다. 또한 비상상황 시 2차 사고를 방지하기 위해 선박이 대피 할 수 있는 장소에 대한 정보를 사용자가 확인할 수 있도록 알고리즘이 설계되어 있다. 인명안전을 위해 SEGA는 비상상황 시 선박내부 구조정보와 화재 등 변수사항들을 고려하여 승객들에게 빠른 탈출을 위한 최적대피경로를 제공하며, 원격탐사기술을 이용하여 선박주변의 익수자를 탐지하도록 개발 중에 있다. 보다 상세한 내용은 항해항만학회 VTS 특별세션에서 발표할 예정이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.31-38
• /
• 2010

Bus manufacturers have tested and studied the dynamic collapse behavior of a bus body structure in rollover since UN ECE established ECE Regulation 66 to provide the requirement for the strength of bus structure. In spite of the costly cycles of practical tests, however, it is still a hard task to meet the rollover regulation by means of local reinforcements in the bus structure. Therefore it is necessary to develop a well designed strategy for the rollover strength implemented in the early stage of vehicle development. In this study, the suitable development method for each design stage from a component to complete body structure was considered to make a well-established development process of a bus body structure for rollover safety. For the efficient approach of the concept design stage, a numerical model based on the plastic hinge theory was used instead of detailed shell models. After setting up the concept design for the component size and geometry, the shell model was used to confirm and optimize the whole structure composition. The process developed in this study was practically used as an effective method to predict the rollover behavior of a new bus body structure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.420-427
• /
• 2015

This paper statistically reviewed for the USNCAP frontal crash test results carried out by NHTSA. Vehicle samples were selected on total 20 vehicles which were included on 15 vehicles for MPV&SUV and 5 Pickup. The results was summarized as followings. The performance for the driver was better than the passenger's in the average sense. There exist distinctions between the driver and the passenger on the USNCAP front test procedure, for example dummy size, seating position and airbag style. Therefore these differences originated in the statistical results. Main effect was Neck injury for crash performance on both dummies on the average value. Root cause of neck injury was different for each dummy, ie, the driver caused from Nte & Ntf, but the passenger did absolutely Nte mode. Reliability evaluated from the standard deviation was highly dependent upon chest injury on the driver and neck injury on the passenger. Restraint system was also summarized.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.261-264
• /
• 2006

지능형 차량정보 시스템은 21세기 교통체계로 기대를 모으고 있는 ITS(Intellligent Transport System)의 구축에 핵심이 되는 시스템이다. 이러한 시스템을 구현하기 위해서 종래의 네비게이션, 차량용 무선통신, 차량진단 등의 단일화된 시스템을 통합적으로 수행하며, 계측 또는 수집된 데이터를 분석하여 지능적으로 차량의 주행 상태를 분석 / 진단함으로써 차량에서의 안전한 운행과 운전자 및 승객들이 요구하는 정보 또는 다양한 서비스를 제공하기 위한 새로운 모듈의 개발이 절실히 필요한 실정이다. 따라서, 본 논문에서는 CAN(Controller Area Network) BUS을 이용한 차량의 상태수집 모듈과 능동 데이터베이스에 관해 기술하고 이를 통합하기 위한 임베디드 보드를 이용한 CAN BUS연계형 차량용 복합통신모듈의 프로토타입 H/W을 구성하여 실용화 가능성 및 유용성을 제시하고자 하였다.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.190-198
• /
• 2009

This study shows the developing process of the risk assessment models for railway casualty accidents. To evaluate the risks of these accidents, the hazardous events and the hazardous factors were identified by the review of the accident history and engineering interpretation of the accident behavior. The frequency of each hazardous event was evaluated from the historical accident data and structured expert judgments by using the Fault Tree Analysis (FTA) technique. In addition, to assess the severity of each hazardous event, the ETA (Event Tree Analysis) technique and other safety techniques were applied. The risk assessment models developed can be effectively utilized in defining the risk reduction measures in connection with the option analysis.