• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.49-63
• /
• 2019

Crowdedness management at subway platforms is essential to improve services, including the prevention of train delays and ensuring passenger safety. Establishing effective crowdedness mitigation measures for platforms requires accurate estimation of the congestion level. There are temporal and spatial constraints since crowdedness on subway platforms is assessed at certain locations every 1-2 years by hand counting. However, smart cards generate real-time big data 24 hours a day and could be used in estimating congestion. This study proposes a model based on data from transit cards to estimate crowdedness dynamically. Crowdedness was defined as demand, which can be translated into passengers dynamically moving along a subway network. The trajectory of an individual passenger can be identified through this model. Passenger flow that concentrates or disperses at a platform is also calculated every minute. Lastly, the platform congestion level is estimated based on effective waiting areas for each platform structure.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.270-277
• /
• 2015

In some sections of the Seoul Metropolitan Subway, severe congestion can be observed during rush hours and on specific days. The subway operators have been conducting regular surveys to measure the level of congestion on trains: the results are then used to make plans for congestion reduction. However, the survey has so far focused just on train' congestion and has been unable to determine non-recurring congestion due to special events. This study develops an algorithm to estimate the platform congestion rate by time using individual public transportation card data. The algorithm is evaluated by comparison of the estimated congestion rate and the ground truth data that are actually observed at non-transfer subway stations on Seoul subway line 2. The error rates are within ${pm}2%$ and the performance of the algorithm is fairly good. However, varying walking times from gates to platforms, which are applied to both non-peak periods and peak time periods, are needed to improve the algorithm.

• Journal of Platform Technology
• /
• v.6 no.1
• /
• pp.17-23
• /
• 2018

Taxi's queue for entering into taxi stand makes traffic jam and congestion around taxi stand. If we make that taxi waits in another place around taxi stand, and can approach to taxi stand when it gets in its turn, these traffic jam and congestion around taxi stand can be reduced. In this paper, we propose entry sequence operating system for taxi stand to reduce traffic jam and congestion around taxi stand. In this system, taxi driver can request his sequence number, and the system issues sequence number to driver. When it is time to approach to taxi stand due to issued sequence number, the proposed system notifies to taxi driver via taxi terminal. Taxi getting the proposed service can wait in another place around taxi stand, and can approach to taxi stand after receiving notify for approaching. Therefore, the proposed system in this paper can reduce traffic jam and congestion around taxi stand because it can reduce or get rid of taxi's queue around taxi stand. We implement the taxi stand approach sequence management system proposed in this paper for taxi stand installed in Chungju-Si, Chungbuk. We use Google Cloud service and Android platform for implementing.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.3
• /
• pp.50-62
• /
• 2015

Recently, Subway Line No. 9, described as a 'hell-like' subway for its recorded load factor of max. 240% due to the opening of the 2nd phase extension section, has been causing problems of recurrent congestion in a subway station building. A recurrent congestion in the station building becomes a factor to offend rail users and to reduce the efficiency of railway management. This study aims to establish the methodology for effect evaluation of information provided to rail users, and conducts a gate metering case study considering the congested conditions at a platform among the methodologies for effect evaluation. The metering effect evaluation by load factor was conducted through selecting the micro simulation and pedestrian simulation tool grafting a gate metering. As a result, it was confirmed that, if gate metering is performed, the service level and pedestrian density of a platform by load factor would improve. In other words, if metering is conducted at a platform, it is possible to control the load factor in the waiting space of a platform. Therefore, it was judged through this study that it is possible to set up the index for effect evaluation of information provided to manage congestion of rail users, and establish the methodology for effect evaluation of information provided to rail users through a program.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.15-27
• /
• 2017

In general, increasing train dwell time leads to increasing train service frequency, and it in turn contributes to increasing the congestion level of train and platform. Therefore, the studies on train dwell time have received growing attention in the perspective of scheduling train operation. This study develops a prediction model of train dwell time to enable train operators to mitigate platform congestion by metering passenger inflow at platform gate with respect to platform congestion levels in real-time. To estimate the prediction model, three types of independent variables were applied: number of passengers to get into train, number of passengers to get out of trains, and train weights, which are collectable in real-time. The explanatory power of the estimated model was 0.809, and all of the dependent variables were statistically significant at the 99%. As a result, this model can be available for the basis of on-time train service through platform gate metering, which is a strategy to manage passenger inflow at the platform.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.542-547
• /
• 2019

Autonomous train is investigated to increase the capacity of railroad, and the reliability of wireless communication plays a critical role in terms of decreasing the inter-train distance. In this paper, we propose a transmission scheme for autonomous train communication in highly congested environment. The proposed scheme, namely distributed uplink orthogonal frequency division multiple access (OFDMA) random access (UORA), applies the triggered uplink access (TUA) and the UORA, introduced in the sixth generation WLAN standard, IEEE 802.11ax, for communication devices on vehicle and platform in a distributed manner. The simulation results show that the proposed scheme efficiently improves the packet transmission success rate in highly congested channel conditions compared to the conventional enhanced distributed channel access (EDCA) transmission scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2A
• /
• pp.95-104
• /
• 2012

Pattern recognition using ensemble classifiers is composed of strong classifier which consists of many weak classifiers. In this paper, we used feature extraction to organize strong classifier using static camera sequence. The strong classifier is made of weak classifiers which considers environmental factors. So the strong classifier overcomes environmental effect. Proposed method uses binary foreground image by frame difference method and the boosting is used to train crowdedness model and recognize crowdedness using features. Combination of weak classifiers makes strong ensemble classifier. The classifier could make use of potential features from the environment such as shadow and reflection. We tested the proposed system with road sequence and subway platform sequence which are included in "AVSS 2007" sequence. The result shows good accuracy and efficiency on complex environment.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.85-93
• /
• 2010

Unlike the existing subway service evaluation system, service evaluation indices by travel section in 26 subway stations were developed and appraised. Travel sections were classified into (1) subway station approach, (2) from entrance to platform, (3) platform, and (4) passageway for transfer, after which weights by travel section and by service evaluation index were estimated using analytic hierarchy process (AHP) by transportation experts. Subway service satisfaction data was gathered from 2000 passengers at the 26 subway stations. The results showed that the weights of (1) subway station approach and (4) passageway for transfer were highest and the weights by travel sections were different if kinds of services were the same. Comfort on the platform, crowdedness in the passageway for transfer, and transfer information from entrance to platform were highest in order in terms of satisfaction. Meanwhile, the results of the IPA showed that services in the passageway for transfer were high in terms of weights but were relatively low in terms of satisfaction. Therefore the services in passages for transfer needed to be reformed preferentially.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.55-64
• /
• 2010

In order to prepare an efficient solution for PM10 reduction in underground stations, the authors measured PM10 concentration levels every 30 minutes in the concourse, platform, and tunnel of Gaehwasan Station of Seoul's subway line 5. Through a correlation analysis of each changing pattern of PM10 concentration, the direction and velocity of diffusion in underground stations were estimated. The PM10 concentration levels were highest in the tunnel, followed by the platform and concourse. PM10 concentrations in the tunnel, platform, and concourse showed a pattern of increasing in the rush hours and decreasing in the non-rush hours. According to the statistical analysis of PM10 concentrations and changing patterns in each location, the higher PM10 concentration in the tunnel expanded to the platform, and some from the platform expanded to the concourse. Therefore, to efficiently reduce PM10 concentrations, it is essential to detect the centralized generation, diffusion factor, expanding route, expanding measure, and other variables and to remove or reduce the diffusion factor and level. Through operating the ventilation system in the right time frame while the PM10 concentration level increases, the power consumption and peak power consumption can be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3220-3226
• /
• 2011

In order to monitor internal risk factors such as fire, terror, etc. on the subway station, the surveillance systems using CCTV and various kinds of sensors have been implemented and recently, introduction of surveillance systems using an advanced IT technology, sensor network technology is tried on several areas. Since 2007, Korean government has made an effort to develop the intelligent surveillance and monitoring system, which can monitor fire, intrusion, passenger congestion, health-state of structure, etc., by using wireless sensor network technology and intelligent video analytic technique. For that purpose, this study carried out field wireless communication environment test on Chungmuro Station of Seoul Metro on the basis of ZigBee that is considered as a representative wireless sensor network before field application of the intelligent integrated surveillance system being developed, arranged and analyzed and ZigBee based wireless communication environment test results on the platform and waiting room of Chungmuro Station on this paper. Results of wireless spectrum analysis on the platform and waiting room showed that there is no radio frequency overlapped with that of ZigBee based sensor network and no frequency interference with adjacent frequencies separated 10MHz or more. As results of wireless data transmission test using ZigBee showed that data transmission is influenced by multi-path fading effect from the number and flow rate of passengers on the platform or the waiting room rather than effects from entrance and exit of the train to/from the platform, it should be considered when implementing the intelligent integrated surveillance system on the station.