• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.950-962
• /
• 2013

The purpose of this study was to develop the slim-fit dress shirt pattern. Among the published educational patterns, there were four patterns based on similar design and silhouette with slim-fit dress shirts. Then, the drafting method of those patternsBB were compared and analyzed. The subjects for wearing evaluation were three 20 to 39 aged average-sized men. After the wearing evaluation(5 Likert point scale), N pattern had been chosen as the final comparison pattern because it received the highest points. The slim-fit shirt pattern was developed based on the result of wearing evaluation. The foundation design were as following: shirt length (Stature/2-12), back length (Stature/4), armhole depth (Chest/4+1), width (Chest/4+3), Interscye; Back (Chest/6+5), Interscye; Front (Chest/6+4), width of the nape of neck (Neck/6+1=◎), height of the nape of neck (◎/3), of the front neck (◎-0.5), depth of the front neck(◎+1.5). After the wearing evaluation about researched pattern and N pattern, researched patternsBB scale points were bigger than N pattern and there were slight differences. The scale points for N patternsBB movement evaluation showed highest points on all contents. Therefore, the researched pattern is suitable for the original form of slim-fit dress shirt. The new dress shirt pattern reflected the slim-fit trend in the research expected to help educational environment and industrial site.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.195-209
• /
• 2014

This study aimed to identify the preferred jeans design and needed improvements through survey research aimed at men aged 20~29. In order to identify the current wearing trends and problems of jeans, the study carried out survey research aimed at men in their twenties who had purchased and worn jeans. As a result of survey research aimed at consumers, it was discovered that fit was deemed most important during the purchase of jeans. As to the question which type of slacks was worn most frequently, the answer was slim type jeans. Regarding body parts that became the selection standard during the purchase of jeans, the answer was thigh and waist. The body parts that showed the lowest assessment result appeared to be thigh circumference, waist measurement, slacks length, and slacks bottom. To a question asking about things to be repaired and to be improved, they replied that there were problems in measurement fit, dissatisfaction with materials, and washing and management.

• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.349-356
• /
• 2020

This study provides information on how to improve the wearing sensation and the fit of slim-fit jeans through an analysis of actual wearing conditions and dissatisfaction. The study is based on a questionnaire survey. A survey was conducted on 296 women in their 20s living in Korea to analyze wearing dissatisfaction with slim-fit jeans. The study used descriptive statistics for analysis using SPSS Statistics Ver.23. Surveys on the actual situation of wearing jeans and level of dissatisfaction indicated that most women in their 20s mainly wore slim-fit jeans and were aware of the size of their jeans. Most tended to double-check the size of the jeans, indicating that the inaccurate sizing system of slim-fit jeans caused confusion for consumers. In addition, the results of the survey on the most considered parts of the body when consumers buy jeans are waist, thigh and leg length. They insisted that their waists were thin and their thighs were thicker than their waists; so their pants would not fit and they were obese. There is a problem between waist size and thigh size; therefore, it is necessary to develop new patterns for slim-fit jeans with improved fit around the waist area that can improve the negative results of surveys on the level of dissatisfaction, indicating discomfort in the waist, belly, and thigh areas while wearing slim-fit jeans.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.209-224
• /
• 2014

This study aims to compare the ease of shirt patterns in the men's wear market that have been constantly developing, and to analyze the fitness and appearance through the 3D virtual try-on system. The study selected three industrial patterns and two educational materials of classic-fit and slim-fit shirts for a total of ten items. The experiments involved virtual wearing, a stress contact point perspective map, and appearance evaluations. First, the ease differed significantly in the chest, waist, and sleeve cap height according to the patterns. Second, based on the stress, contact point, and transparency, there was ease in the order of Nam, D-brand, J-brand, Park, and S-brand in the classic-fit shirts while the order of D-brand, Nam, J-brand, Park, and S-brand resulted in the slim-fit shirts. Third, in the appearance evaluation, higher points resulted in the order of J-brand, Park, S-brand, D-brand, and Nam in both classic-fit and slim-fit. The results showed that proper ease differs greatly by shirt-fit and target age. Also, the shirts with more ease tended to be evaluated less favorably in the appearance evaluation. Based on the results, the study suggests that the proper ease in chest circumference is 18cm for the classic-fit shirts and 6 cm for the slim-fit shirts.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.157-175
• /
• 2014

This study aimed to develop appropriate jeans patterns for men in their twenties. The study discovered designs and materials that were most commonly used by investigating preferred jeans brands for men in their twenties, and among them three brands were selected. The study carried out a fitting assessment aimed at research subjects who had the average body type of men in their twenties and who wore jeans of the selected brands. Then, the study designed research patterns by taking as a basic pattern the patterns of the company who received the highest score and modifying any part that revealed a problem. After making the research jeans in twice, a fitting adequacy assessment was undertaken in order to identify any difference between the existing jeans and the research jeans. As a result of the appearance assessment, the problems shown in appearance overall was confirmed to be improved as it received a higher assessment compared with the existing jeans overall. As a result of the fitting assessment, the study collected the assessment results of waist measurement, hip circumference, thigh circumference, and fit of back central line laid slope ease. Based on the result, the study confirmed the parts to be modified and proposed slim fit jeans patterns in consideration of the body type characteristics of men in their twenties.

• Fashion & Textile Research Journal
• /
• v.23 no.4
• /
• pp.491-503
• /
• 2021

The purpose of this study is to develop a slim-fit jeans pattern that is suitable for the lower body of upper grade elementary school girls, who are beginning to show gender differences in body shape. Four age groups of two years each were considered for girls 7 to 14 years old. The mean and standard deviation of body measurements were calculated for each age group to analyze body shape variation, and hence the body characteristics of upper grade elementary school girls were identified. The high-frequency measurements of stature-waist circumference and waist circumference-hip circumference combinations were analyzed. In order to determine the size of each part of the jeans pattern and derive the drafting formula, the pattern sizes of brand A jeans, which had received a high score in the evaluation for ready-to-wear jeans(Kim & Lee, 2020), were used as the base criteria. In addition, the body sizes observed and calculated in the study were applied. Additionally, the requirements for better fit of ready-to-wear jeans, found in the survey on jeans wearing conditions and size dissatisfaction(Kim & Lee, 2019), were taken into consideration. Based on this research, a model set of jeans was prepared with the pattern developed and its fit evaluation was conducted. Thus, a slim-fit jeans pattern suitable for the lower body of upper grade elementary school girls was finalized. The pattern proposed in this study has excellent appearance and motion functionality, and is expected to contribute to reduce the fit dissatisfaction.

• Journal of Fashion Business
• /
• v.22 no.5
• /
• pp.96-112
• /
• 2018

This study developed the pants pattern, that improved appearance and gesture functions in clothes to resolve inconveniences in case of activities with being adequate in fitness of slim-fit pants for obese adolescents. The slim-fit pants pattern was developed through the fitting test after designing and making the pattern of the experimental clothing A(c/pu; 99/1%) with the primary commercial clothing as basic prototype, through the fitting test and implementation of the experimental clothing, modified and supplemented secondarily, and through the fitting test of the second experimental clothing, modified and supplemented tertiary. In terms of findings, first, as a result of analyzing the commercial slim-fit pants, it is interpreted to have projected an optical illusion, that appears to be slim due to being narrow in width of the front panel when observed from the front of the pants. Second, in the fitting test of the first experimental clothing, the prototype of commercial clothing was understood to have improved butt, crotch, waist and femoral regions. Third, pattern design of the second experimental clothing was allowed to decline abdominal pressure, in case of the sitting position, by making the crotch line in the front panel short and by handling it with a yoke belt, and was processed a difference between waist and hip circumference in the back panel, with a rubber band in the whole waist part. Fourth, in the gesture function test of the third experimental clothing, high evaluation was received in every item excluding the knee region.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.105-115
• /
• 2015

This study aims to compare the ease of men's single-pleated pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The researchers selected five(four educational materials and one industrial pattern) slim-fit single-pleated pants which is the current fashion trend in menswear. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing, opacity, and clothing pressure. The results showed that D pants had the greatest ease on the waist circumference, while C pants had the least ease. The E pants had the greatest ease on the hip circumference, then B pants and C pants showed less ease. Also, the E pants had the longest on the pants length, then D pants showed the shortest. In the appearance evaluation, A pants received the most favorable results, followed by D, B, E, and C pants, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem in all pants, so the clothing pressure was high. From the results, we can understand that each of the 5 single-pleated pants patterns has different ease amount and silhouette.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.983-991
• /
• 2012

The purpose of this study was to provide basic reference data for the development of slim-fit dress shirts patterns for a variety of body somatotypes. For this study, a survey was conducted on the actual product conditions of slim-fit dress shirts of domestic brands(Actual wearing and purchasing conditions, fit, design preferences). The survey was conducted on 135 men in their 20s~30s. PASW Statistics 18 was used for data analysis. The result of this study are as follows : Analysis of the actual wearing conditions of dress shirts indicates that consumers own an average of 1~2 classic-fit shirts and 1~4 slim-fit shirts. These are normally worn once or twice a week, and purchased mainly at department stores, agencies, direct sales markets or outlets. With respect to the purchasing factors, price and style were the main priorities. Surveyed consumers had the greatest preference for designs with a non-darted front and a darted back, a semi-wide collar and the color white. By classifying the surveyed by somatotype, Type B preferred designs darted on both front and back, Type A preferred designs with a non-darted front and a darted back, while Type Y preferred designs non-darted on both front and back. All somatotypes displayed a preference for semi-wide collars and the color white.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.588-596
• /
• 2015

This study aims to provide the basic reference necessary in improving the fitness of a ready-to-wear brand jacket through a research on the wearing conditions and preferences regarding a tailored jacket by body shape of the women in their 30s. The following results were drawn by implementing the research method of the self-administered type survey targeting 201 women in their 30s from August 14~28, 2014. First, the female consumers in their 30s preferred one button slim fit jacket when purchasing a tailored jacket and chose a close-fitting size. Second, the slim fit tailored jacket consumers preferred a jacket with some extra portion in the bust and hip areas but tightly fit in the waist area. Third, when purchasing a jacket under the ready-to-wear size system, the women with a triangle shape similar to a standard body silhouette had less instances of mending a jacket while the women with a big or small rectangle shape different from a standard body silhouette had more experiences of mending a jacket. Accordingly, it is expected of the manufacturers to increase the fitness satisfaction of the consumers by identifying the problems concerning the fitness and suggesting the improvement plans to produce a jacket of a good fitness reflecting the properties of different body shapes through such research on the wearing conditions and preferences regarding a tailored jacket by body shape of the women in their 30s.