• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.115-117
• /
• 2003

본 논문에서는 CDMA S-ALOHA 시스템에서 공평한 패킷 전송을 위한 MAC 프로토콜을 제안한다. CDMA S-ALOHA 시스템에서 동일한 슬롯에 전송되는 패킷들은 다원접속 간섭으로 작용하며, 이는 패킷 전송 실패의 주요 요인이 된다 따라서 최대의 시스템 처리율을 얻기 위하여 동시에 전송되는 패킷의 수를 일정하게 유지시킬 필요가 있다. 제안한 기법에서는 기지국이 망의 부하에 따라 다음 슬롯의 패킷 전송 확률을 계산하여 방송하고, 단말기들은 수신한 전송 확률을 기반으로 패킷 전송을 시도한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1399-1405
• /
• 2003

This paper proposes an MAC protocol for fair packet data services in stoned CDMA system. In slotted CDMA system, the packets transmitted in the same slot act as multiple access interference, so that unsuccessful packet transmissions are entirely caused by multiple access interference. Therefore, in order to get the optimal system throughput, the number of simultaneously transmitted Packets should be kept at a proper level. In the proposed protocol, the base station calculates the new and retransmitted packet transmission probability of mobile stations according to the offered load and then broadcasts these probabilities. Mobile stations, which have a packet, attempt to transmit packet with the received probabilities. Simulation results show that the proposed scheme can offer better system throughput than the conventional scheme, and guarantee a good fairness among all mobile stations regardless of the offered load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.102-108
• /
• 2006

In this paper, we propose an interference cancellation(IC) scheme using a partial Rake(PRAKE) combining in ultra-wideband(UWB) multipath fading channels. In this IC scheme, differently from the conventional transmitter model, which employs a guard interval between each frame, the guard interval is employed between each slot for estimating the multiple access interference(MAI). The UWB systems using the proposed IC scheme have little performance degradation without regard to the number of user, while the conventional UWB systems have a significant performance degradation according to the number of user. In order to reduce the receiver complexity, the PRAKE combining of post-canceled signal and the partial user IC scheme are also proposed.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.05a
• /
• pp.239-245
• /
• 2007

차세대 유비쿼터스 환경에서 중요한 기술적, 산업적 위치를 차지하는 RFID 네트워크에는 다수의 RFID 리더(Reader)와 수많은 RFID 태그(Tag)들이 통신을 하면서 존재하게 된다. 이러한 RFID 네트워크에서 리더와 태그간의 원활한 통신을 위해서는 주파수 충돌이 발생하지 않아야 한다. 주파수 충돌 현상은 리더와 다수의 태그들 간의 태그 충돌(Tag Collision)과 리더간 주파수 간섭으로 인한 리더간 충돌(Reader Collision)로 나뉘어 질 수 있다. 따라서 리더간 충돌 현상을 피하기 위해서는 근접한 리더들 간에 서로 다른 타임슬롯(Timeslot)을 사용하여 태그와 통신을 시도하여야 한다. 본 연구에서는 RFID 네트워크에서 다수의 리더간 충돌을 최소화하며 안전한 태그 인식을 할 수 있도록 타임 슬롯 할당 문제를 CSP(Constraint Satisfaction Problem)로 접근한다. 그리고 CSP를 풀기 위해 리더간 충돌 문제가 가지고 있는 제약조건을 찾아내고 해를 찾기 위한 목적함수를 모델링 한다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.75-82
• /
• 2003

이동체 탑재형 안테나는 설치 장소의 특성상 소형화와 경량화가 필수적인 요소이다. 그러므로 이동체 탑재형 안테나의 경우 반사판형 안테나보다 마이크로스트립 어레이 안테나가 널리 쓰이고 있다. 본 고에서는 마이크로 스트립 슬롯 어레이 안테나를 설계하였다. 만족스러운 고 이득을 얻을 수 있으며 동시에 패치 소자의 개수를 줄이기 위해 패치 단일 소자가 가급적 고 이득을 낼 수 있는 구조로 설계하였다. 본 고에서 설계한 슬롯 안테나는 기생슬롯을 가진 H 자형 타입의 소자이다. 설계는 제작상의 오차를 고려하여, 운용 주파수 11.7~12.75 GHz에서 VSWR 1.8:1 이하를 목표로 하였다. 제작된 안테나의 측정결과는 11.7~12.75 GHz대역에 걸쳐 VSWR < 1.8의 만족한 결과를 보이고, 단일 소자의 시뮬레이션 이득 결과는 10 dBi를 보였으며 $4\times4$ 어레이를 했을 경우 이득은 22 dBi의 값을 보였다. 제작되어진 안테나는 추후 급전 네트웍의 최적화를 통해 상호 간섭(Mutual Coupling)을 최소화하여 효율을 최대화한다면 직접 위성 서비스를 수신하기 위한 초소형 안테나로 활용될 수 있을 것으로 기대된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2263-2268
• /
• 2015

This paper describes packet scheduling techniques that can be used to alleviate the impact of interference. The mechanism is consisted of interference estimation and master delay police. Proposed scheduling police is effective in reducing packet loss and delay. Another advantage worth mentioning, are the additional saving s in the transmitter power since packet are not transmitted when channel is bad. This paper gives that scheduling policy works only with data traffic since voice packets need to be sent at fixed intervals. However, if the delay variance is constant and the delay can be limited to a slot, it may be worthwhile to use DM packet for voice.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.485-492
• /
• 2003

This paper proposes a transmission probability control scheme for guaranteeing fair packet transmissions in CDMA slotted ALOHA system. In CDMA slotted ALOHA system, the packets transmitted in the same slot act as multiple access interference, so that unsuccessful packet transmissions are caused entirely by multiple access interference. Therefore, in order to maximize the system throughput, the number of simultaneously transmitted packets should be kept at a proper level. In the proposed scheme, the base station calculates the packet transmission probability of mobile stations in the next slot according to the offered load and then broadcasts this probability to all the mobile stations. Mobile stations, which have a packet to transmit, attempt to transmit packet with the received probability. Simulation results show that the proposed scheme can offer better system throughput and average delay than the conventional scheme, and guarantee a good fairness among all mobile stations regardless of the offered load.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.135-143
• /
• 2022

In this paper, the compact waveguide slot array antenna for interferometric radar altimeter is proposed. The proposed antenna structure consist of corrugation structure which is applied between each channel to improve isolation, three-channel waveguide slot array antenna and feeder. In addition, to reduce the occurrence of phase ambiguity, the baseline spacing of the three-channel antenna is analyzed and the results are applied to the design. For compact design, reduced height and SMP connector structure are used and the dip brazing method which is the conjugation method after dipping to flux is used for the fabrication of the lightweight antenna. The measurement result of the proposed antenna shows less than 1.41 : 1 (VSWR) and 48.3 dBc (isolation). The antenna gain is higher than 20.2 dBi and the side lobe levels are lower than 18.8 dB (vertical plane) and 10.0 dB (horizontal plane).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.718-723
• /
• 2017

We propose a pilot hopping scheme that improves the limited system capacity due to pilot contamination in multi-cell environment with large-scale antenna arrays at a base station, assuming the infinite number of antennas. In the conventional fixed pilot scheme, each user obtains the same signal-to-interference ratio (SIR) over a long period of time. Therefore, a user with strong interference has continuously low SIR which degrades its service quality. In the proposed pilot hopping scheme, different pilot signals are used for each time slot, and different amounts of interference are received every time. When such a pilot hopping technique is applied, the SIR fluctuates at every time slot. When the Hybrid Automatic Repeat & reQuest (HARQ) technique is applied in such a channel, the outage probability and transmission rate are improved. We show that there is the performance gain of the proposed scheme over the conventional scheme through computer simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.336-342
• /
• 2008

This paper suggests a CPW-fed UWB antenna with new hexagonal slot. To increase the impedance bandwidth of an antenna, the proposed antenna is designed with the hexagonal patch. Polygonal slot is inserted in the hexagonal patch to avoid interference with IEEE 802.11a. The proposed antenna was fabricated on FR-4 substrate with a relative dielectric constant 4.7 and thickness of 1.6 mm and measured for VSWR Characteristic and group delay. The fabricated antenna shows that the gain flatness is 4 dBi except at the band for IEEE 802.11a.