평판형 고체산화물 연료전지 스택의 고온 밀봉 구조에 대하여 설명하고 스택 운전 후 사후 분석을 통하여 밀봉재와 금속 분리판의 계면반응에 대하여 고찰하였다. 대표적인 고온 밀봉재인 Barium-Silicate 계 결정화 유리와 Fe-Cr 계 금속 분리판은 스택의 작동온도인 $700{\sim}850^{\circ}C$ 에서 고온 반응을 통하여 계면에 반응생성물을 형성하는 것이 확인되었다. 이러한 계면반응은 장기 운전시 SOFC 스택 성능 저하의 원인이 되고, 열 싸이클(작동온도${\leftrightarrow}$상온)을 가하면 계면반응 생성물이 delamination 되어 밀봉구조가 파괴되어 수명을 단축시키게 된다. 계면반응은 Fe-Cr 계 금속 분리판의 산화물인 Cr 산화물, Fe 산화물이 밀봉유리 소재와 반응을 일으키는 것이 주요 원인으로 판명되었다. SOFC 스택에서 열 싸이클시 계면반응에 의하여 기밀도가 감소하는 현상이 확인되었으며, 밀봉 구조의 어느 부분에서 계면반응이 진행되는지 관찰하였다. 이러한 계면반응을 막기 위해서는 금속 분리판과 밀봉유리 사이에 계면반응을 억제하는 보호층을 형성하는 방법이 효과적이다. 본 연구에서는 보호층으로서 밀봉유리 및 Fe-Cr 계 금속 분리판과의 계면반응성이 낮고 열팽창 계수가 비슷한 Yttria Stabilized Zirconia 층을 APS(Atmospheric Plasma Spray) 공정을 이용하여 형성하였다. 밀봉유리/YSZ 보호층/금속분리판은 gas-tight 한 밀봉 구조를 형성하였으며, YSZ 보호층은 밀봉유리와 Fe-Cr 계 금속 분리판 소재와 계면반응을 효과적으로 억제하는 것이 확인되었다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2011.05a
/
pp.36-36
/
2011
고분자 전해질 연료전지용 분리판은 가격비와 중량비가 높아 부품 가격 및 중량을 낮출 경우 파급 효과가 높을 것으로 예상된다. 일반적인 금속판들은 연료전지 스택 내의 산성 분위기에서 존재하므로 표면 부식이 쉽게 발행한다. 본 연구에서는 연료전지의 사용환경을 고려하여 금속판의 부식방지 및 표면특성 향상을 위해 그라핀을 코팅하였으며, 연료전지 스택 내부와 유사한 산화성 분위기를 모사하여 전기화학적 특성을 분석하였다.
Lim, Jongkoo;Park, Jongcheol;Kho, Back Kyun;Kwon, Ki Wook;Shin, Hyunkhil;Hur, Taeuk;Cho, Sungbaek
한국신재생에너지학회:학술대회논문집
/
2010.11a
/
pp.85.1-85.1
/
2010
캐스케이드형 연료전지 시스템에 있어서 각 스택의 단에서 전기화학반응에 의해 생성된 물을 분리하여 적절하게 배출시켜주는 것은 스택의 성능 및 내구성 향상을 위해 매우 중요하다. 이를 위해 연료전지 스택 각 단의 상이한 조건에 맞는 기액분리기의 설계가 필요하다. 유량에 따른 기액분리기의 부피와 원활한 연료 가스와 생성수의 분리를 위한 내부구조 및 입구 속도 등의 변수들에 따라 기액분리기의 성능 뿐만 아니라 연료전지 시스템 전체의 성능에 영향을 준다. 그러나 기액분리기의 폐쇄적 구조 때문에 실험을 통해 내부의 거동 및 현상을 파악할 수 없어 앞서 언급한 변수들의 효과를 확인할 수 없는 문제점이 있다. 이에 CFD(Computational Fluid Dynamics, 전산유체역학)를 활용하여 각 조건에 따른 기액분리기 내부의 현상을 파악하고 이를 통해 기액분리기 설계를 최적화하였다.
We analyze the effects of CO poisoning and air bleeding on the performance of a PEM (polymer electrolyte membrane) fuel cell stack fabricated using commercial MEA (membrane electrode assembly). Dynamic response data from the experiments on the performance of a stack are identified by obtaining steady-state gains and time-constants of the first-order system model expressed as a first-order differential equation. It is found that the cell voltage of the stack decreases by 1.3-1.6 mV as the CO concentration rises by 1 ppm. The time elapsed to reach a new steady state after a change in the CO concentration is shortened as the magnitude of the change in the CO concentration increases. In general, the steady-state gain becomes bigger and the time-constant gets smaller with increasing the air concentration (air-bleeding level) in the reformate gas to restore the cell voltage. However, it is possible to recover 87%-96% of the original cell voltages, which are measured with free of CO, within 1-30 min by introducing the bleed air as much as 1% of the reformate gas into the stack.
최적 스택 필터는 시그널 또는 영상의 임의의 특성 정보를 보존하고자 하는 요구조건에 의해 강제된 구조적 제약 하에서 최대의 잡음제거 효과를 얻을 수 있다. 그리고 임계치 분할 특성과 양의 부울 함수에 기반한 이진 영역에서의 처리 특성은 이 필터가 높은 병렬성을 갖고 있음을 보여준다. 본 논문에서는 두 개의 병렬 계산 모델 MCC(Mesh-Connected Computer)와 CCC(Cube-Connected Computer)에서 최적 스택 필터를 위한 1차원 병렬 알고리즘을 개발한다. 최적 스택 필터의 실행 시간은 주로 이진 median 연산에 의해 결정되고 본 논문에서 제안된 알고리즘은 선형 분리성에 의해 이 연산을 구현한다. 이를 바탕으로, M 레벨의 1-D 시그널의 길이가 L이고 윈도우 폭이 N이라고 가정할 때, 제안된 알고리즘은 {{{{root M times root M`` MCC에서 O(L sqrt{M}`) 시간에 그리고 M 개의 PE를 갖는 CCC에서 O(L log M)시간에 수행될 수 있다. 또한 잡음을 더욱 효과적으로 제거하기 위해 윈도우 폭 N을 증가시킬 때, 제안된 병렬 알고리즘의 계산 시간은 일정하게 유지됨을 보인다.Abstract An optimal stack filter achieves the maximum noise attenuation under the structural constraints imposed by the requirement of preserving certain signal or image features. And the filter provides a high parallelism due to the principles of threshold decomposition and binary processing based on positive Boolean functions(PBFs). In this paper, we develop an one-dimensional parallel algorithm for the optimal stack filter on two parallel computation models, MCC(Mesh-Connected Computer) and CCC(Cube-Connected Computer). The running time of the optimal stack filter depends mainly on the binary median operation and our algorithm realizes this operation by the linear separability. Based on this scheme, our parallel algorithm can be performed in {{{{O(L sqrt{M}`) MCC and inO(L log M) time on CCC with M PEs, when the length of M``-valued 1-D signal is L`` and window width is N`` Also, we show that the computation time of our parallel algorithm keeps constant when the window width N increases in order to achieve the best noise attenuation.
The steady state and dynamic characteristics of large cell area MCFC stacks were analyzed to solve the problems such as temperature difference generated in stacks and pressure difference between anode and cathode. Manipulated variables (current density, duel utilization rate, oxidant utilization rate) and controlled variables (temperature difference, anode and cathode pressure difference) which had an important effect on the MCFC stack performance were determined using operation results of two types of MCFC stacks (5kW (3,000 $\textrm{cm}^2$, 20 ea). 3kW (6,000 $\textrm{cm}^2$, 5ea)). The stability and transfer function representing system dynamics were obtained by steady state gain rate which showed the relative change between MVs and CVs. The transfer function was a 3$\times$3 matrix and a typical first order system without time delay. The optimal operating condition of large cell area MCFC stacks could be determined by analyzing dynamic characteristics. In case of a 5 kW MCFC stack, pressurized operation with recycle flow should be used to control the outlet temperature less than 68$0^{\circ}C$ and to control the MCFC system effectively. MIMO control or decoupler should be used to remove the interaction between MVs and CVs. This result will be used as important data in determining the control structure design and operation mode of large cell area MCFC systems in the future.
In this study, a design methodology for thermoacoustic refrigerator systems is proposed based on the thermal conduction and acoustic theories, and physical characteristics of an actual thermoacoustic refrigerator are investigated. Especially, the resonator is designed for minimizing the energy loss at cold end, and the position and length of the capillary stack are optimized in order to get a large temperature difference between hot and cold ends. Experimental results show that a maximun temperature difference of 22.7$^{\circ}$ and a temperature of 4.3$^{\circ}$C at cold end are obtained by supplying an electrical input of 33W without any thermal load at cold end.
Proceedings of the Korea Information Processing Society Conference
/
2022.11a
/
pp.583-585
/
2022
최근 기술의 발전으로 인해 자연어 처리 모델의 성능이 증가하고 있다. 그에 따라 평문 지문이 아닌 KorQuAD 2.0 과 같은 웹 문서를 지문으로 하는 기계 독해 과제를 해결하려는 연구가 증가하고 있다. 최근 기계 독해 과제의 대부분의 모델은 트랜스포머를 기반으로 하는 추세를 보인다. 그 중 대표적인 모델인 BERT 는 문자열의 순서에 대한 정보를 임베딩 과정에서 전달받는다. 한편 웹 문서는 태그 구조가 존재하므로 문서를 이해하는데 위치 정보 외에도 태그 정보도 유용하게 사용될 수 있다. 그러나 BERT 의 기존 임베딩은 웹 문서의 태그 정보를 추가적으로 모델에 전달하지 않는다는 문제가 있었다. 본 논문에서는 BERT 에 웹 문서 태그 정보를 효과적으로 전달할 수 있는 HTML 임베딩 기법 및 이를 위한 전처리 기법으로 HTML 태그 스택을 소개한다. HTML 태그 스택은 HTML 태그의 정보들을 추출할 수 있고 HTML 임베딩 기법은 이 정보들을 BERT 의 임베딩 과정에 입력으로 추가함으로써 웹 문서 질의 응답 과제의 성능 향상을 기대할 수 있다.
Generalized LR parsing is one of the enhanced LR parsing methods so that it overcome the limit of one-way linear stack of the traditional LR parser using graph-structured stack, and it has been playing an important role of a firm starting point to generate other variations for NL parsing equipped with various mechanisms. In this paper, we propose a conditional Action Model that can solve the problems of conventional probabilistic GLR methods. Previous probabilistic GLR parsers have used relatively limited contextual information for disambiguation due to the high complexity of internal GLR stack. Our proposed model uses Surface Phrasal Types representing the structural characteristics of the parse for its additional contextual information, so that more specified structural preferences can be reflected into the parser. Experimental results show that our GLR parser with the proposed Conditional Action Model outperforms the previous methods by about 6-7% without any lexical information, and our model can utilize the rich stack information for syntactic disambiguation of probabilistic LR parser.
Proceedings of the Korean Information Science Society Conference
/
2005.11b
/
pp.979-981
/
2005
"버퍼에 대한 바운드 체크를 하지 않는다"라는 작은 취약성 하나가 버퍼 오버플로우라는 큰 위협을 만들어냈다. 그러나 그것을 단지 C언어의 무결성 문제로 단정 지어 버릴 수도 없는 문제이다. 일반적으로 버퍼 오버플로우 공격은 메모리에 할당된 버퍼의 경계를 넘는 데이터를 입력하여 프로그램의 함수복귀주소를 조작하고 공격자가 원하는 코드를 삽입하여 이루어진다. 이러한 버퍼 오버플로우에 대한 여러가지 대응책들이 나왔지만 약간의 문제점들을 가지고 있다. 그래서 본 논문에서는 운영체제의 세그멘테이션 기법을 이용하여 그 공격에 대응할 수 있는 한 가지 방법을 제시하고자 한다. 기존의 스택가드(카나리아 버전)의 문제점인 우회공격과 카나리아 워드를 추측하여 이루어지는 공격 그리고 MineZone RAD의 문제가 되는 DRAMA 등에 있어서도 효과적으로 방어할 수 있을 것으로 기대한다. 또한 스택가드(Memguard 버전)에서 이곳저곳에 산재되어 관리하기 어려운 함수복귀주소를 별도의 세그먼트 테이블로 쉽게 관리할 수 있을 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.