• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.277-279
• /
• 2003

The black and white image scanning system realization and design using illumination control on CIS(Contact Image Sensor) be amenable to recognize a papers, OMR and OCR sheet is proposed. The design technique is used CIS scanning sensor in fixing step motor and is optimized with DSP processor for image processing, and transfer input image data pare line in feeding a step unit to PC on the USB interface. The method of illumination control is that turn on and off of CIS lamp while scanning paper. The scanner system with optimal illumination enhanced PSNR 0.3% in scanning image.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.470-474
• /
• 2002

The graylevel image scanning system realization and design using CIS(Contact image Scanning)be amenable to recognize a papers, OMR and OCR sheet is proposed. The design technique is used CIS scanning sensor in fixing step motor and is optimized with DSP processor for inage processing, and transfer input image data par line in feeding a step unit to PC on the USB interfacer. This system is portable ad A4 size scanning. and keeps image scan processing speed 300mm/sec. The recognition percentage has 98% on the OCR and bar codes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.581-584
• /
• 2002

The graylevel image scanning system realization and design using CIS(Contact Image Scanning)be amenable to recognize a papers, OMR and OCR sheet is proposed. The design technique is used CIS scanning sensor in fixing step motor and is optimized with DSP processor for image processing., and transfer input image data par line in feeding a step unit to PC on the USB interfacer. This system is portable and A4 size scanning and keeps image scan processing speed 300mm/sec The recognition percentage has 98% on the OCR and bar codes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.27-33
• /
• 2001

The performance of the ordinary Fiber Bragg Grating(FBG) sensor strain measurement system, which uses Fabry-Perot filter for scanning wavelength, has limitation for application because of hysteresis characteristics of PZT element in the filter, slow scan rate of the filter and the high cost of system. We proposed and experimented a multiple FBG sensor system using light emitting diode(LED) as a light source and adapting Code Division Multiplexing(CDM) method to separating out individual sensor signal. Output signals for a applied static and dynamic strain and crosstalk levels between sensor signals were measured. The price of the system is very loss and the response speed is very fast. Crosstalk levels between sensor signals below - 30 dB were demonstrated.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.2
• /
• pp.19-26
• /
• 1999

The geographic information system is needed in the image recognition field. This study recommends an efficient method to construct the GIS from the feature extraction of roads through scanning of a normal or hand-made maps. Many algorithms have been presented for such image information recognition. However, such algorithm processes have limitations due to their complexity. To efficiently extract road information from scanning map images. a $3{\times}3$ directional form is applied - structuring element, erosion and dilation, and opening and closing. This method allows for efficient evaluation of the featured road extracts from the map image and from the character sets.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.1
• /
• pp.39-52
• /
• 1996

본 논문에서는 고속 영상자료를 병렬 암호화 할 수 있는 새로운 알고리즘을 제안하였다. 암호화 테이블과 스케닝 순서, 스크램블 등의 문제점들을 개선하였다. 입력자료들은 독립된 블럭으로 분리되며 각 블럭들은 같은 암호화 알고리즘을 통하여 암호화 된다. 그러므로 시스템이 n개의 처리기로 구성되어 있으면, 전체 처리시간이 1/n로 감소됨이 기대된다. 또한 대표성이라는 개념을 적용한 결과, 높은 비도를 갖는 키를 사용한 효과르 얻을 수 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.71-77
• /
• 1996

This paper describes the development of on the machine measuring(OMM) system which can directlry measure the three dimensional machined dimensilnal accuracy using scanning probe in milling machine. Two algolithms, continuous path(CP) measurement using UC program and CAD data assisted point to point(PTP) measurement, were developed regarding specification of scanning probe. The OMM system was contructed to verify the developed system suing the proposed algorithm, and actually measured three kinds of machined TV shadow mask molds. The developed system was evaluated it's repeatability and compared with the current measurement system of CMM(Coording Measuring Machine) in terms of relative accuracy and time reduction and productivity increase.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04a
• /
• pp.503-505
• /
• 2003

현재 인터넷을 통한 상대방의 신뢰성을 보장해 주는 인증서 사용이 빈번해지고 있다. 그러나 오프라인상의 전자문서는 상대방의 신뢰성 보장과 전자문서의 위변조의 위험성이 많다. 또한 전자문서는 오프라인상의 이동성에 제악을 받게 된다. 본 논문에서는 이러한 문제를 해결하고, 사용자가 온라인과 오프라인에서도 사용하게 편리하도록 문서내용, 문서작성자의 인증서 그리고 전자서명값을 이차원 바코드로 변환하여 출력된 전자문서에서 상대방의 신뢰성과 문서의 무결성을 보장하도록 제안한다. 제안된 시스템에서는 문서내용, 문서작성자의 인증서, 전자서명값을 변환해 출력문서에 이차원 바코드를 첨부하게 된다. 출력된 문서에서 첨부된 이차원 바코드를 스케닝 하고 문서내용, 문서작성자의 인증서 그리고 전자서명값을 얻어오고 검증을 통해 위변조 여부 판단하여 상대방의 신뢰성과 문서의 무결성을 확인 하도록 한다.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.9-14
• /
• 2020

It is necessary to apply a non-contact high-speed scanning system that can measure in real time in order to prevent the dropping and deformation of the main parts of railway vehicles during high-speed running. Recently, research on a scanning system that detects the deformation state of main parts from a video image taken using a high-performance camera has been actively pursued. In this study, we researched an analysis algorithm of a high-speed scanning system that uses a high-performance camera to monitor the deformation and drop-out state of the main components of the running units equipment in real time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.169-172
• /
• 2000

In this paper, an OMM (On-the-Machine Measuring) system has been developed, which can perform measuring and inspection of sculptured surfaces of die and mold, by use of a scanning-type touch probe mounted into the spindle of a NC machine. The calibration procedures of a scanning prove (SP2-1, Renishaw) and an algorithm for measuring surface points by a ball-nosed stylus have been studied. The system has been developed based on commercial CAM software (Z-Master 2000), and tested through measuring a plastic injection molding-die. Also some experimental results of the calibration and measuring for given surface positions are analyzed to verify its accuracy and reliability.