• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.217-220
• /
• 2009

This paper presents experimental results of Recess Characteristic of Swirl Coaxial Injector of fuel-rich gas generators. It was revealed that the internal impinging phenomenon played an important role in the spray characteristics, such as spray angle and breakup length.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.207-212
• /
• 2013

To investigate the possibility of using artificial means for the control of shear layers in swirl jets, a shear excitation device is introduced. The device consists of co-centric dual nozzles with internal lobes (i.e., convex surfaces) of small height to induce disturbance. The number of convexities can be varied to produce the various modes in azimuthal direction. The acquired velocity data of the swirling jets, with and without the lobes, are numerically simulated in 2-D contour plots and 3-D particle trace plots. The results are compared with the baseline (i.e., no excitation case) at various excitation modes. Conclusively it is observed that the artificial excitation method is effective in the control of the vortical structure in swirling jets.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.70-75
• /
• 2012

In this paper, the regression rate of the End-Burning Hybrid Rocket with variation of swirl intensity was investigated experimentally with the variation of fuel diameter, injector shape and angle. When fuel grain diameter is large, fuel mass flow rate increases. And the injector diameter increase, fuel regression rate decrease. The impinging effect of oxidizer flow on fuel surface for fuel combustion efficiency is stronger than swril effect in this End-burning propulsion system. The relation between the regression rate, oxidizer mass flux and swirl intensity was obtained.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.9
• /
• pp.67-75
• /
• 2006

A fully nonlinear model accounting for swirling effect has been applied in analyzing the dynamic response for a classical swirl injector. The current work applied highly accurate Boundary Element Methods (BEMs) in assessing its static and dynamic characteristics. On the basis of moving surface treatment method and surface instability study, which are obtained from the previous static characteristics analysis in pressure-swirl injectors, this work was expanded for analyzing the dynamics of a classical swirl injector. The dynamic response through injector components for disturbed inflow condition was investigated. The modified code was validated from comparison with the theoretical result for a typical swirl injector. Clearly the simulated result shows the interesting characteristics of swirl injectors to provide either amplification or damping of the input disturbance through each component. These results give promise in applying the current model to nonlinear dynamic characteristics of swirl injectors.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.17-26
• /
• 2005

Both numerical analysis and cold tests for the swirl coaxial type injector were performed to obtain the influence of spray angle, velocity ratio and liquid film thickness for pressure drop and recess. The basic experimental and numerical data obtained in this study can be applicable to the performance design of swirl coaxial type injector. Spray angle was not affected by the applied test pressure drop, but spray angle was affected by tangential velocity ratio and shape factors. Feasibility of numerical analysis for the liquid film thickness and spray angle was confirmed, and the change of liquid film thickness by tangential velocity ratio affected more seriously than pressure drop, and liquid film thickness was decreased with increasing tangential velocity ratio.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.62-71
• /
• 2008

Swirl injector with adjustable backhole length was analyzed to suppress high-frequency combustion instability in Liquid Rocket Engines. In order to analyze the effect of swirl injector as an acoustic absorber, swirl injector was regarded as a quarter-wave resonator and its damping capacity is verified in atmospheric temperature. Experiments were carried out with copied tubes on air core because the interior air core volume of injector has a direct effect on damping. From the experimental data, it is proved that increasing the number of injectors mounted at each anti-node point can increase acoustic damping effect. Also, when tuned injectors at 1L, 1T, 1L1T modes simultaneously are installed at each anti-node point of model chamber, the damping effect of tuned injectors with multi modes agree well with it of tuned injectors with single mode.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.9-17
• /
• 2006

The influences of recess length of a liquid/liquid swirl coaxial injector on spray characteristics were investigated. It was revealed that the internal impinging phenomenon played an important role in the spray characteristics, such as spray angle and breakup length. Also, as the recess length increased, the mean drop size increased due to the increase of effective film thickness and mixing efficiency increased, but in the case of very deep recess length, the mixing efficiency decreased.

• Journal of ILASS-Korea
• /
• v.10 no.4
• /
• pp.1-7
• /
• 2005

The purpose of this study is to investigate the effect of swirler vane angle and the aspect ratio of swirl chamber of nozzle on the characteristics of single spray. The characteristics of sprat's have been investigated by measuring the spray angle, droplet size and velocity Visualization of spray was conducted to obtain the spray angle and breakup process. The spray characteristics such as droplet size and velocity were measured by Phase Doppler Anemometry(PDA). It was found that the spray angle was increased with increasing the swirler angle. For both sprays, the axial velocity and SMD were decreased with increasing the swirler vane angle. It was also shown that the axial velocity and SMD were decreased with increasing the aspect ratio of swirl chamber The effect of vane angle un the spray characteristics was greater than the aspect ratio of swirl chamber for single spray.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.28-28
• /
• 2000

가스터빈 연소기의 역방향 이중 스월러의 두 번째 벤츄리 끝단 각도의 변이가 연소실내의 유동 특성에 미치는 영향에 대해 알아보았다. 벤츄리 끝단 각도가 수렴형, 직선형, 발산형의 세 형상에 대해 연료 분무가 없는 경우, 연료 분무는 있으나 연소는 없는 경우, 연소가 일어나는 경우에 대해 수치적 방법으로 연소실 내의 유동 특성에 대해 고찰하였다. 연료의 분무는 분무된 액적들이 갖는 운동량이 유입되는 공기의 운동량에 비해 적으므로 분무에 의한 유동 특성의 변화는 무시할 수 있는 반면 연소가 일어날 때는 유동 특성이 판이하게 달라짐을 확인할 수 있었다. 가스터빈 연소실 내의 유동 특성은 벤츄리 끝단 각의 변이에 따라 민감하게 변하고 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.82-88
• /
• 1999

The object of this study is to find new evaluation index for in-cylinder flow chracteristics istead of current swirl, tumble coefficient using steady flow test rig on intake port system. To this end, port flow system. To this end, port flow rig test was conducted on DOHC head varying intake valve lift respectively. Finally combination angular coefficient and inclination angle were introduced as new evaluation index for in-cylinder angularflow characteristics instead of swirl and tumble coefficient.